{"title":"Garden \u0026 Outdoors","description":"\u003cp\u003ePlanters, trellises, stakes, and outdoor-friendly prints.\u003c\/p\u003e","products":[{"product_id":"open-cage-stackable-plant-support-stakes","title":"Open Cage Stackable Plant Support Stakes","description":"\u003cp\u003eThis plant support cage is designed with an open side so you can more easily add it around plants that have already grown, allowing you to gently support leaves, fruits, and vegetables without stressing the branches. The strong, stackable design lets you meet whatever height is needed.\u003c\/p\u003e\u003cp\u003eEasy to print, no supports required. Three heights are available: 11cm, 16cm, and 21cm tall, all 10cm wide. The model can also be scaled for a different size.\u003c\/p\u003e\u003cp\u003eDesign by squinn on MakerWorld (license: CC BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67355972534576,"sku":null,"price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/16784-0.jpg?v=1783727705"},{"product_id":"circular-garden-trellis","title":"Circular Garden Trellis","description":"\u003cp\u003e7 inches in diameter and 8 inches tall. A great support structure for climbing plants.\u003c\/p\u003e\u003cp\u003ePrints at 0.2mm layer height, no supports required.\u003c\/p\u003e\u003cp\u003eDesign by Lefty on MakerWorld (license: CC BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67355979940144,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/17020-0.png?v=1783728102"},{"product_id":"3-tier-fantasy-planter-with-drainage","title":"3-Tier Fantasy Planter with Drainage","description":"\u003cp\u003eA scalable, no-support 3-tier fantasy-style planter with built-in drainage — great for succulents and small plants on a desk or shelf.\u003c\/p\u003e\u003cp\u003eDesigned by Triple G Workshop. Licensed CC BY-SA (attribution required, share-alike).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67356900557104,"sku":null,"price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/50704-0.jpg?v=1783755439"},{"product_id":"ceiling-mount-plant-rod-holder-3-pack","title":"Ceiling Mount Plant Rod Holder (3-Pack)","description":"\u003cp\u003eA set of 3 ceiling-mount brackets for a 1-5\/16\" diameter closet rod, perfect for hanging a plant pot above a window. Works great for ceiling mounting (not recommended for wall mounting).\u003c\/p\u003e\u003cp\u003eDesigned by mfeidler. Licensed CC BY (attribution required).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67356935782704,"sku":null,"price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/52968-0.png?v=1783757402"},{"product_id":"1-inch-sprinkler-coupling","title":"1 Inch Sprinkler Coupling","description":"\u003cp\u003eA 1-inch sprinkler pipe coupling — handy repair part for a broken sprinkler line.\u003c\/p\u003e\u003cp\u003eDesign licensed CC-BY, original design by mrmichaeljrussell on MakerWorld.\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67357689086256,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/62562-0.png?v=1783782884"},{"product_id":"modular-hydroponic-tower-garden","title":"Modular Hydroponic Tower Garden","description":"\u003cp\u003eA large modular hydroponic tower garden — stack modules to grow herbs, greens, and small plants vertically without soil. A substantial, made-to-order print for serious home growers.\u003c\/p\u003e\u003cp\u003eDesign licensed CC-BY-SA, original design by boundarycondition on Thingiverse, printed via MakerWorld.\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67358705615152,"sku":null,"price":384.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/65860-0.png?v=1783791418"},{"product_id":"tangled-vine-trellis","title":"Tangled Vine Trellis","description":"\u003cp\u003eA decorative trellis with a tangled-vine design for climbing plants.\u003c\/p\u003e\u003cp\u003eLicensed under CC BY-SA.\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default","offer_id":67365421809968,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/95069-0.jpg?v=1783978065"},{"product_id":"planter-with-stair","title":"Planter with stair","description":"\u003cp\u003eSmall Planter for Succulent. Remixed - thicker walls.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cbr\u003e \u003c\/p\u003e\u003cp\u003eDesign by Zetta Art on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67366863569200,"sku":null,"price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_54be3535-fa00-44be-8e4d-b1b421b7abd7.png?v=1784005267"},{"product_id":"sprinkler-spike","title":"Sprinkler Spike","description":"\u003cp\u003eI needed a solid way to hold my ¼\" irrigation sprinklers in place so they could be directed into the flowerbeds, so I designed these 5\" spikes to hold the risers in place.  You assemble your riser and sprinkler head and then just press fit them into the spikes so they can be held firmly in place.\u003c\/p\u003e\u003cp\u003eI have printed them in PLA, and PETG, but ASA (Like the photo) is a better choice for outside use exposed to full sun.\u003c\/p\u003e\u003cp\u003eI have printed on multiple printers including a CR30 belt printer and seems to work well on all. I suggest printing with a high level of infill for strength when you are shoving them into the ground.\u003c\/p\u003e\u003cp\u003eDesign by Ian Foulds on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67366895976752,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_1646ffec-df5c-40bb-ba75-ae6511424590.jpg?v=1784005870"},{"product_id":"the-owl-house-magic-glyphs-coaster-set-light-ice-plant-fire","title":"The Owl House: Magic Glyph's - Coaster Set! (Light, Ice, Plant, Fire)","description":"\u003cp\u003eLuz's Magic Glyphs from The Owl House!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eLight, Ice, Plant, Fire! \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eIn coaster form, and printed in colour!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eI've added a pause after the first 2 coasters print to let you swap Orange → Red to get all 4 colours in a set. \u003c\/p\u003e\u003cp\u003eDesign by vidguide on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67366927401264,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_5ce661d5-5730-4b58-b586-a649b326bfe8.png?v=1784006459"},{"product_id":"head-planter-14-yoga","title":"Head Planter 14 Yoga","description":"\u003cp\u003eHere is my collection of Head Planters, maybe i will make more someday.\u003c\/p\u003e\u003cp\u003eDesign by julianeickmann on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367001162032,"sku":null,"price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_80ecd1db-c98f-4074-8dee-f0379fd6ddb8.png?v=1784007676"},{"product_id":"simple-plant-clip","title":"Simple Plant Clip","description":"\u003cp\u003eSimple clip to secure your plants.\u003c\/p\u003e\u003cp\u003ePLA can become brittle when exposed to UV light, so you should consider printing with PETG or ABS\/ASA if you plan to use the clip outdoors for an extended period.\u003c\/p\u003e\u003cp\u003eInner diameter: 21mm\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eCheck out my new parametric plant clip if you need a different size: \u003ca target=\"_blank\" href=\"https:\/\/makerworld.com\/en\/models\/501777\" rel=\"nofollow noopener ugc\"\u003eParametric Plant Clip\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eDesign by Schnitzl on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367065747760,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_f13bd3ce-5b20-4a92-a96c-e133b259ec5f.png?v=1784008738"},{"product_id":"sneaky-garden-gnome","title":"Sneaky Garden Gnome","description":"\u003cp\u003ecommercial use!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eMulticolor prepainted - free for commercial use\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eSneaky squatting gnome loves to hide in your garden, flower pots, or just about anywhere\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eprints with about 15% supports\u003c\/p\u003e\u003cp\u003e13% gyroid infill\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesign by AcmeArt on MakerWorld (license: BY-ND).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367160021296,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_02902081-e0fb-45d0-b23e-488f9c302118.png?v=1784010365"},{"product_id":"long-garden-stake","title":"Long Garden Stake","description":"\u003cp\u003eI made this so it is more visible from the ground or raised planter boxes. Text can be changed to meet any plant needs. Pint in at least PLA+ to survive outdoors. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eAs always my designs can be used commercially for no cost. \u003c\/p\u003e\u003cp\u003eDesign by Allied 3D RMG on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367165788464,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_78979d1a-ba2f-453f-9de6-999ee2d2bdcf.png?v=1784010486"},{"product_id":"parkside-oscillating-garden-sprinkler-covers","title":"Parkside oscillating garden sprinkler covers","description":"\u003cp\u003e\u003cstrong\u003eEN: \u003c\/strong\u003eSometimes I need to water the lawn near the fence, but I don't want to spray all the way to the neighbors. So, I first printed out plugs, and then it occurred to me to also print out nozzles that wouldn't spray diagonally but directly upward. Then I further modified the nozzles to prevent water jets from intersecting by tilting the jet away from the longitudinal axis by 5°. And it is perfect. To the covers, I modeled eyelets, allowing them to be connected by a cord, keeping them all together and preventing any loss, regardless of the number attached to the sprinkler.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eFits model HG03453C, maybe also other models with main tube diameter 29mm (36mm total height with nozzles).\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCZ:\u003c\/strong\u003e Někdy potřebuji kropit trávník poblíž plotu, ale nechci stříkat až k sousedům. Tak jsem si nejprve vytisknul záslepky a pak mě napadlo vytisknout i trysky, které by nestříkaly šikmo, ale přímo vzhůru. Poté jsem ještě modifikoval trysky, aby se vodní paprsky nestřetly, a to tak, že jsem paprsek vychýlil od podélné osy o 5°. A funguje to skvěle. Ke krytkám jsem namodeloval očka, aby šly krytky spojit provázkem a byly všechny pohromadě a neztratily se, ať už se na postřikovač nasadí v jakémkoliv počtu.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ePasuje na model HG03453C, možná i na další modely, které mají hlavní trubku o průměru 29mm (celková výška i s tryskama 36mm).\u003c\/p\u003e\u003cp\u003eDesign by PedroKV on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367232438576,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_234f228b-2714-48a2-97ef-640b15fb1521.png?v=1784011225"},{"product_id":"shaker-siphon-for-garden-hose","title":"shaker siphon for garden hose","description":"\u003cp\u003eEasily start a siphon: Just shake! Sized for a 12mm (1\/2 \") garden hose.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eIf you want to empty a barrel etc using a siphon but find it uneasy to start the siphon - this is an easy way to do so. This shaker siphon is a actually just a valve. By shaking it down into the water (or other liquid), that water can easily flow in, but when you pull up again, the water is trapped and comes up, too. By shaking up and down, the valve and the water's inertia pump enough water up to start the siphon effect.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eI tried to design it to have low flow resistance and not to be prone to catch debris.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eAdded a version with gardena adapter (check “Download STL\/CAD files”), a version for ¾\" hose, and one with garden hose thread.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ePrinting: It worked without a brim for me, but if it comes loose while printing, try adding a brim.\u003c\/p\u003e\u003cp\u003eDesign by DrJones on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367255769392,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_aaade73a-90b6-4798-8bdc-5d0893383eaa.png?v=1784011582"},{"product_id":"shaker-siphon-for-garden-hose-with-quick-release","title":"Shaker siphon for garden hose with quick release","description":"\u003cp\u003eThis is a remix on the shaker siphon.\u003c\/p\u003e\u003cp\u003eI added a garden hose attachment for easy quick release.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eIt is best to use PTEG or ABS but mine worked with PLA.\u003c\/p\u003e\u003cp\u003eYou can add a rubber O-ring in the quick release section for better connection.\u003c\/p\u003e\u003cp\u003eDesign by wytsedaems on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367266255152,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_b9ac2263-b46e-473e-af2f-1e77df58e58d.png?v=1784011834"},{"product_id":"customizable-garden-sign","title":"Customizable Garden Sign","description":"\u003cp\u003eEasy to print garden sign for outdoors! Simple assembly and colorful sign that reads “Welcome Garden”. Perfect for household garden or outdoors sign. If you want, you can edit the fusion 360 file to change the text. To change the text, first right click and click \"edit sketch\" on sketch history in the bottom left. Then, right click the text, and click “edit text\" to change the text. \u003c\/p\u003e\u003cp\u003eDesign by superbryantyu on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367305052464,"sku":null,"price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_8fcf1a22-355c-4449-bd1b-a0a1f99adaa5.png?v=1784012734"},{"product_id":"garden-seed-box","title":"Garden Seed Box","description":"\u003cp\u003eQuick and easy box that perfectly fits seeds packets for my wife's green house. Nuff said!\u003c\/p\u003e\u003cp\u003eDesign by Wake the Kraken on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367306101040,"sku":null,"price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_200aab76-6106-459a-b180-4b4d6b0f915b.png?v=1784012746"},{"product_id":"garden-stakes-english-french-and-german","title":"Garden Stakes (English, French, and German)","description":"\u003cp\u003eUPDATE (May 18 2026) \u003c\/p\u003e\u003cp\u003e-I have reuploaded the models for all original 15 stakes, in English, French, and German (45 total). \u003c\/p\u003e\u003cp\u003e-I have also added print profiles for each individual stake.\u003c\/p\u003e\u003cp\u003e-A Blank stake has been added, which can be used for your own customization (Written on in sharpie, text added via bambu slicer, etc)\u003c\/p\u003e\u003cp\u003e-I will be creating a new Model with additional stakes, languages, etc. When uploaded, I will include all links here. These will be as per commented requests.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e-------------------------\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eSome simple stakes I made for planting my new seedlings. I may create more as needed or requested. Dimensions are 25mm x 180mm x 3mm (the pointed part is 60mm long).\u003c\/p\u003e\u003cp\u003eCurrent files available:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePeppers\u003c\/li\u003e\n\u003cli\u003eTomato\u003c\/li\u003e\n\u003cli\u003eSpinach\u003c\/li\u003e\n\u003cli\u003eCucumber\u003c\/li\u003e\n\u003cli\u003eBasil\u003c\/li\u003e\n\u003cli\u003eCilantro\u003c\/li\u003e\n\u003cli\u003eLettuce\u003c\/li\u003e\n\u003cli\u003eRadish\u003c\/li\u003e\n\u003cli\u003eBeans\u003c\/li\u003e\n\u003cli\u003eCarrot\u003c\/li\u003e\n\u003cli\u003eRosemary\u003c\/li\u003e\n\u003cli\u003eThyme\u003c\/li\u003e\n\u003cli\u003eSage\u003c\/li\u003e\n\u003cli\u003eChives\u003c\/li\u003e\n\u003cli\u003eOregano\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFrench versions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePoivrons\u003c\/li\u003e\n\u003cli\u003eTomate\u003c\/li\u003e\n\u003cli\u003eEpinard\u003c\/li\u003e\n\u003cli\u003eConcombre\u003c\/li\u003e\n\u003cli\u003eBasilic\u003c\/li\u003e\n\u003cli\u003eCoriandre\u003c\/li\u003e\n\u003cli\u003eLaitue\u003c\/li\u003e\n\u003cli\u003eRadis\u003c\/li\u003e\n\u003cli\u003eHaricots\u003c\/li\u003e\n\u003cli\u003eCarotte\u003c\/li\u003e\n\u003cli\u003eRomarin\u003c\/li\u003e\n\u003cli\u003eThym\u003c\/li\u003e\n\u003cli\u003eSauge\u003c\/li\u003e\n\u003cli\u003eCiboulette\u003c\/li\u003e\n\u003cli\u003eOrigan\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGerman versions\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBasilikum\u003c\/li\u003e\n\u003cli\u003eBohnen\u003c\/li\u003e\n\u003cli\u003eGurke\u003c\/li\u003e\n\u003cli\u003eKarotten\u003c\/li\u003e\n\u003cli\u003eKoriander\u003c\/li\u003e\n\u003cli\u003ePaprika\u003c\/li\u003e\n\u003cli\u003eRettich\u003c\/li\u003e\n\u003cli\u003eSalat\u003c\/li\u003e\n\u003cli\u003eSpinat\u003c\/li\u003e\n\u003cli\u003eTomate\u003c\/li\u003e\n\u003cli\u003eRosmarin\u003c\/li\u003e\n\u003cli\u003eThymian\u003c\/li\u003e\n\u003cli\u003eSalbei\u003c\/li\u003e\n\u003cli\u003eSchnittlauch\u003c\/li\u003e\n\u003cli\u003eOrigano\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDesign by Mack Stuff on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367355023664,"sku":null,"price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_48207dae-9318-4194-b593-d3b1cf384fec.jpg?v=1784013171"},{"product_id":"watering-can-sprinkler","title":"Watering can sprinkler","description":"\u003cp\u003eNozzle for a 15mm watering can tube, easy to print. Scalable to fit your watering can.\u003c\/p\u003e\u003cp\u003eDepending on your printers precision the sprinkle holes may need some afterwork with a small drill bit.\u003c\/p\u003e\u003cp\u003ePrint Settings:\u003cbr\u003eSupports: Likely not, depends on your printer and part orientation.\u003cbr\u003eResolution: 0,2mm\u003cbr\u003eInfill: 100%\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eNotes: Position the model with the holes facing the print bed to get a large surface area contact and making sure there will be no support cleanup inside of the print.\u003c\/p\u003e\u003cp\u003ePLA works as a material of choice as long you make sure to have at least 4 wall perimeters so it doesn't leak. PETG would also be a good choice.\u003c\/p\u003e\u003cp\u003eOne of my older design from Thingiverse.\u003c\/p\u003e\u003cp\u003eDesign by gustav.ferdman on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367356105008,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_994c19bd-f0ff-48d2-bf37-531da8273198.jpg?v=1784013255"},{"product_id":"sprinkler-for-watering-can-extension","title":"Sprinkler for watering can, extension","description":"\u003cp\u003e\u003cstrong\u003eGood day,\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWelcome to my profile, full of models and miniatures :-)\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eI am an Ainon3Dprint model maker and printer\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eI have a sprinkle for you. ideal for such classic communist metal - tin. It works nicely. Printed from PETG on a 0.2mm layer. Upright without supports!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTo contact for possible cooperation, please use the email:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003emichal.vevoda@gmail.com\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIf you are interested in my work, the links are here:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ehttps:\/\/www.instagram.com\/ainon3dprint\/\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ehttps:\/\/www.tiktok.com\/@ainon3dtisk\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ehttps:\/\/www.patreon.com\/Ainon3Dprint\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003ci\u003eThanks for the support, I'm glad :-)\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003e\u003ci\u003eHave a nice day\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003eDesign by Ainon3Dprint on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367358431536,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_d09e2bb2-fc76-4f1f-b9a4-90e5b08a4a58.png?v=1784013579"},{"product_id":"animal-crossing-plant-holder","title":"Animal crossing plant Holder","description":"\u003cp\u003eAnimal Crossing plant holder\u003c\/p\u003e\u003cp\u003eDesign by ObiYanKenobi1980 on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367361380656,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_73c82c71-be7e-4135-8b47-e833b7bb90c6.png?v=1784013657"},{"product_id":"pflanzenclip-plant-clip","title":"PflanzenClip \/ Plant Clip","description":"\u003cp\u003eDie Pflanzenstengel haben genügend Platz und werden beim Wachsen nicht behindert.\u003cbr\u003eDie Clips sind optimal geeignet für 2 -3 mm und 5 -7 mm dicke Stäbe.\u003c\/p\u003e\u003cp\u003eThe plant stems have enough space and are not hindered in their growth.\u003cbr\u003eThe clips are ideal for 2 - 3 mm and 5 - 7 mm thick rods.\u003c\/p\u003e\u003cp\u003eDesign by Timo on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367365443888,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_fd3804fd-649e-43a6-a7ef-c9a5c3d1ef48.jpg?v=1784013705"},{"product_id":"4th-of-july-garden-stakes","title":"4th of July Garden Stakes","description":"\u003cp\u003e4th of July Decor for your planters \u0026amp; garden. Many uses and multiple designs. Decorate the food table for your 4th of July party.\u003c\/p\u003e\u003cp\u003eScale to different sizes to suit your needs.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eIf you found this model useful, please consider boosting it to support the creator. Thanks!\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesign by lindnjoe on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367564149040,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_7acd0645-170f-408b-85e2-d6d3c6c31762.png?v=1784014852"},{"product_id":"rigid-modular-moss-pole-plants-sphagnum-coconut","title":"Rigid modular moss pole plants (sphagnum, coconut)","description":"\u003ch2\u003eRigid modular moss pole for houseplants (can be filled with sphagnum, coconut fiber)\u003cbr\u003e \u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003e1. Moss pole\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e2. Groundtip\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e3. Top cap\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e4. Clip for securing the plant\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e\u003cp\u003eTested over the \u003cstrong\u003eyears\u003c\/strong\u003e, the best for printing in \u003cstrong\u003ePLA\u003c\/strong\u003e.\u003cbr\u003e\u003ci\u003eReady-to-print profiles attached\u003c\/i\u003e\u003cbr\u003e \u003c\/p\u003e\u003cp\u003eThanks to its strong connectors, it allows strong support even for large plants. As the plant grows, we tighten further modules to extend.\u003c\/p\u003e\u003cp\u003eDesign by Nickname on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367580762416,"sku":null,"price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_8c811ba5-eb69-49cc-887e-9d9c5d54e0f7.png?v=1784015473"},{"product_id":"parametric-plant-clip","title":"Parametric Plant Clip","description":"\u003cp\u003eSimple parametric clip to secure your plants.\u003c\/p\u003e\u003cp\u003ePLA can become brittle when exposed to UV light, so you should consider printing with PETG or ABS\/ASA if you plan to use the clip outdoors for an extended period.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eAlso check out my non parametric version: \u003ca target=\"_blank\" href=\"https:\/\/makerworld.com\/en\/models\/221928\" rel=\"nofollow noopener ugc\"\u003eSimple Plant Clip\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eDesign by Schnitzl on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367613301040,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_7563494d-d00e-4ab8-aa8a-1ea32fceb3e1.png?v=1784015956"},{"product_id":"stackable-trellis","title":"Stackable Trellis","description":"\u003cp\u003eRequires supports on the “spike” parts at the bottom of the model, but otherwise not too complicated to print. If you print multiple then you can slide them together easily to get extra height. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eTotal model dimensions are 205mm from the end of the spike to the top of the trellis, and 200mm wide at the top segment, so this should fit on any standard-sized printer bed. The spike portions are 60mm long, so each trellis in the stack gives 145mm of height.\u003c\/p\u003e\u003cp\u003eDesign by Mack Stuff on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367630045488,"sku":null,"price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_dcea317b-f154-40e5-a89f-211d26c5a4f1.jpg?v=1784016233"},{"product_id":"garden-wobble-sprinkler","title":"Garden Wobble Sprinkler","description":"\u003cp\u003eRemixed model which allows it to be mounted on a pole, the hose connector has also been changed.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"background-color: rgb(255,255,255); color: rgb(33,43,54); font-size: 16px\"\u003eCOMMERCIAL LICENSE ACCESS is available through a patreon membership where you help support me and get commercial license which applies to all my models except remixes i made from others work. \u003c\/span\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.patreon.com\/Dengamleninja\" rel=\"nofollow noopener ugc\"\u003ehttps:\/\/www.patreon.com\/Dengamleninja\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eDesign by Dengamleninja on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367644922160,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_d05c225b-7d0c-4361-8484-18b23de5cd67.png?v=1784016530"},{"product_id":"frisbee-3-sizes-plant-pot-saucer-untersetzer","title":"Frisbee 3 Sizes \/ Plant Pot Saucer \/ Untersetzer","description":"\u003cp\u003eFrisbee\u003c\/p\u003e\u003cp\u003eyou can use it also as Plant Pot Saucer, whatever…\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eFrisbee\u003c\/p\u003e\u003cp\u003eauch geeignet als Topf Untersetzer.\u003c\/p\u003e\u003cp\u003eDesign by JohnnyM on MakerWorld (license: BY-ND).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367858897200,"sku":null,"price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_9688d200-aa2e-4818-acd7-834f84a30492.png?v=1784017529"},{"product_id":"indoor-sprinkler-protection-cage-usa","title":"Indoor Sprinkler Protection Cage (USA)","description":"\u003cp\u003eThey are about 1.75 inches tall and about 3.5 inches wide\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eMade for a ceiling in the Eastern USA Home, not sure if other sprinkler systems are of the same size but go ahead and try it out.\u003c\/p\u003e\u003cp\u003eDesign by Elgniston on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367882359088,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_f97d6a10-4489-4b7e-b147-37d6918a6b4e.png?v=1784018023"},{"product_id":"planter-spy-cam","title":"Planter spy cam","description":"\u003cp\u003eA 3D printed spy camera using a Tapo C110 camera.\u003cbr\u003e3 different sleeve designs and 2 pots (standard and spy cam)\u003cbr\u003e\u003cbr\u003eThe tool is included for camera dissemble! \u003cbr\u003e\u003cbr\u003eThe planter stand is also available \u003ca target=\"_blank\" href=\"https:\/\/makerworld.com\/en\/models\/580160#profileId-500989\" rel=\"nofollow noopener ugc\"\u003ehere\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e \u003c\/p\u003e\u003cfigure class=\"media\"\u003e\u003coembed url=\"https:\/\/youtu.be\/DnwSs1Dg34c\"\u003e\u003c\/oembed\u003e\u003c\/figure\u003e\u003cp\u003e\u003cbr\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesign by Diamonds Workshop on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367937638704,"sku":null,"price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_11eef1b2-0695-4914-9473-da17fdc72700.png?v=1784018360"},{"product_id":"hanging-planter","title":"Hanging Planter","description":"\u003cp\u003ePlanter for hanging plants.\u003cbr\u003eThe pot has a diameter of 12cm and is 11.5cm high.\u003cbr\u003eit is particularly suitable for climbing plants.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eI use a hanging chain from Amazon like this\u003c\/p\u003e\u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/tinyurl.com\/25r692a8\" rel=\"nofollow noopener\"\u003ehttps:\/\/tinyurl.com\/25r692a8\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eIn my profile you will also find a way to attach your pots to the window with a hook I created.\u003c\/p\u003e\u003cp\u003eDesign by xX_Stoffel_Xx on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368053375280,"sku":null,"price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_b56ee663-502c-4388-8ad8-90cf86d0ba07.png?v=1784020272"},{"product_id":"garden-hose-healer-female-fittings","title":"Garden Hose Healer: Female fittings","description":"\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/collections\/26728153-garden-hose-helpers\"\u003e\u003ci\u003eSee other garden hose related things I made here\u003c\/i\u003e\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eSay goodbye to your broken garden hoses with the Garden Hose Healer! This 3D printed clamp set with threads is designed to fix broken or cut hoses by adding a female garden hose end. Its robust construction and design ensure a secure fit and prevent leaks, making your hose as good as new. The print-in-place spinning versions here allows you to turn the female coupling portion separate from the hose barb.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e The Garden Hose Healer features a practical and sturdy design, with separately printed pins that securely attach a female garden hose end to a cut hose. The retaining barb and clamping pin design with cap provide a tight seal, ensuring no water escapes. This mender is perfect for anyone looking to extend the life of their garden hose without the need for a complete replacement. The pins are printed separately and inserted to maximize their strength and avoid them snapping off during assembly.\u003c\/p\u003e\u003cp\u003eRevive your garden hose and restore the flow with the Garden Hose Healer! 3MF and STEP files included.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eIf this helps you, a boost would be nice.\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetaining Barb:\u003c\/strong\u003e Ensures a secure grip on the hose.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamping Pin and Cap Design:\u003c\/strong\u003e Provides a tight seal to prevent leaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to Use:\u003c\/strong\u003e Simply attach to the cut end of your hose and tighten.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed and Spinning Variants: \u003c\/strong\u003eChoose to print the solid version if you don't need the female side to spin, or the print-in-place spinning version (more versatile, more challenging print).\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eSpinning has two versions, I recommend the larger one with flats\u003c\/strong\u003e for use with a helping wrench to tighten down the clamp cap. Without using these flats you'll need to rely on the tension from the washer between the male\/female side to be able to tighten the clamp down, and it might not be enough torque.. but I provide this version in case you want it.\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePrinting:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Printed with durable ASA, this model is built to last. PETG can work too, but I would advise against PLA simply because it creeps over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer height:\u003c\/strong\u003e Prints well at 0.16 or 0.12 layer height in ASA. For good threads, thinner layers are recommended. If you haven’t shrink-corrected your ASA printing profiles, you may need to enlarge the model to ~100.7%. Should fit just fine for PETG prints, but you may wish to enlarge to 100.3%.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrientation:\u003c\/strong\u003e I recommend printing as shown in the pictures. A small amount of organic supports ARE needed. Paint them on as shown here (infill\/walls are hidden to show where supports lie in this slicer picture!). Note that this is essentially the same for both spinning and non-spinning, but for the spinning versions the upper part is printed completely on this support!\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003cimg class=\"image_resized\" style=\"width: 34.28%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000665181\/design\/bcd24838-68d3-4eea-8fbb-bdf82cd11950.png\"\u003e\u003cimg class=\"image_resized\" style=\"width: 29.27%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000665181\/design\/a61332dd-ebc9-41d8-b933-3df3c369f519.png\"\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAssembly:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFirst, slide the clamping cap onto the hose itself to tighten down at the end.\u003c\/li\u003e\n\u003cli\u003eSecond, \u003cstrong\u003emake sure you put a printed TPU or rubber (existing\/purchased) hose seal \u003c\/strong\u003ein the female hose thread side. This is needed to prevent any leaks, particularly with the spinning version!\u003cul\u003e\u003cli\u003e\u003cimg class=\"image_resized\" style=\"width: 32.46%\"\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eNext, insert the barb into the cut-off part of the hose. Since this will be tight, it may help to rub a little vegetable oil on the barb ahead of time.\u003cul\u003e\n\u003cli\u003eImportant note: Some hoses have annoying interior construction that can prevent a good seal. In order to get a good seal it's very important that if your hose has any significant internal ribbing like mine does (see below) that you trim them back where it contacts the barb to create an even circular interior. This will ensure a good even seal and prevent water from escaping around the clamps\/barb.\u003c\/li\u003e\n\u003cli\u003eBefore Trimming:\u003c\/li\u003e\n\u003cli\u003e\u003cimg class=\"image_resized\" style=\"width: 50%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000665181\/design\/3348d2b9-98e6-41a9-baa1-487208e0f90e.png\"\u003e\u003c\/li\u003e\n\u003cli\u003eAfter Trimming off troublesome ribbing:\u003c\/li\u003e\n\u003cli\u003e\u003cimg class=\"image_resized\" style=\"width: 50%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000665181\/design\/993c43f6-8fc6-45a6-b638-521072b504b9.png\"\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eNext, install the 8 pins so that the little teeth point inward near the top of the barb as shown. They should press-fit in place. If they don't for some reason, they're easy and quick to reprint at a slightly smaller size (99.5-99% should do it).\u003cul\u003e\u003cli\u003e\u003cimg class=\"image_resized\" style=\"width: 50%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000665181\/design\/3c5fce2c-492c-4cee-96d1-15410d1e94fb.png\"\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLastly, put the cap back on and screw it firmly clockwise to cause these pins to compress down on the hose. You may use a pair of pliers to torque it if you wish. The threads may be tight initially and a little bit of working them back and forth ahead of time and\/or a little vegetable oil may make this part smoother. Depending on the thickness of your hose you may not be able to completely screw the cap all the way, and this is OK. The point is to have the cap compress the retaining pins. Your final result will look like this (photo here of non-spinning version, but basically all the same).\u003cul\u003e\u003cli\u003e\u003cimg class=\"image_resized\" style=\"width: 41.86%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000665181\/design\/4e716550-6e4c-4c24-9142-0bc3c91f1cbc.jpeg\"\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesign by Adam L on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368106623280,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_c6f4024e-60d3-436d-8b47-6752b5cb494e.jpg?v=1784020954"},{"product_id":"garden-hose-healer-hose-to-hose","title":"Garden Hose Healer: Hose to Hose","description":"\u003cp\u003eSay goodbye to your broken garden hoses with the Garden Hose Healer! This version is used to make a repair in the middle of a broken hose, rather than at the end like with the \u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/model\/1016677-garden-hose-healer-male-fitting\" rel=\"nofollow noopener\"\u003emale threads version of this model\u003c\/a\u003e. Its robust construction and innovative design ensure a secure fit and prevent leaks, making your hose as good as new.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e The Garden Hose Healer features a practical and sturdy design, with separately printed pins that securely clamp down on the hose. The retaining barb and clamping pin design with cap provide a tight seal, ensuring no water escapes. This mender is perfect for anyone looking to extend the life of their garden hose without the need for a complete replacement. The pins are printed separately and inserted to maximize their strength and avoid them snapping off during assembly.\u003c\/p\u003e\u003cp\u003eRevive your garden hose and restore the flow with the Garden Hose Healer! 3MF and STEP files included.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eIf this helps you out, boosts are a nice way to say thanks! :)\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetaining Barb:\u003c\/strong\u003e Ensures a secure grip on the hose.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamping Pin and Cap Design:\u003c\/strong\u003e Provides a tight seal to prevent leaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to Use:\u003c\/strong\u003e Simply attach to the cut end of your hose and tighten.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePrinting:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Printed with durable ASA, this model is built to last. PETG can work too, but I would advise against PLA simply because it creeps over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer height:\u003c\/strong\u003e Prints well at 0.16 or 0.12 layer height in ASA. For good threads, thinner layers are recommended. If you haven’t shrink-corrected your ASA printing profiles, you may need to enlarge the model to ~100.7%. Should fit just fine for PETG prints, but you may wish to enlarge to 100.3%.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrientation:\u003c\/strong\u003e I recommend printing as shown in the pictures. Supports ARE needed for this one. Use a brim on the tall part. Support this dark blue highlighted section with organic tree supports as shown here:\u003c\/li\u003e\n\u003cli\u003e\n\u003cimg class=\"image_resized\" style=\"width: 35.45%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000662135\/design\/418745ba-549b-4af7-ad2b-4f3e8ba93cf5.png\"\u003e\u003cimg class=\"image_resized\" style=\"width: 32.13%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000662135\/design\/653bbd79-9a72-42e1-909d-1e47e60be7bf.png\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAssembly:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFirst, put the clamping caps onto the hose itself.\u003c\/li\u003e\n\u003cli\u003eSecond, insert the barb into the cut-off parts of the hose.\u003cul\u003e\n\u003cli\u003eImportant note: Some hoses have annoying interior construction that can prevent a good seal. In order to get a good seal it's very important that if your hose has any significant internal ribbing like mine does (see below) that you trim them back where it contacts the barb to create an even circular interior. This will ensure a good even seal and prevent water from escaping around the clamps\/barb.\u003c\/li\u003e\n\u003cli\u003eBefore Trimming:\u003c\/li\u003e\n\u003cli\u003e\u003cimg class=\"image_resized\" style=\"width: 50%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000662135\/design\/337e8246-503a-4233-8d64-6509f830fd7e.png\"\u003e\u003c\/li\u003e\n\u003cli\u003eAfter Trimming off troublesome ribbing:\u003c\/li\u003e\n\u003cli\u003e\u003cimg class=\"image_resized\" style=\"width: 50%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000662135\/design\/c1190e3d-002a-4a4a-83c3-16b74c802f24.png\"\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eThird, install the 8 pins (on each side) so that the little teeth point inward near the top of the barb as shown. They should press-fit in place. If they don't for some reason, they're easy and quick to reprint at a slightly smaller size (99.5-99% should do it).\u003cul\u003e\u003cli\u003e\u003cimg class=\"image_resized\" style=\"width: 50%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000662135\/design\/0db6da82-b5bb-452f-a9e1-538a0a53d936.png\"\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLastly, put the caps back on and screw it firmly clockwise to cause these pins to compress down on the hose. You may use a pair of pliers to torque it if you wish. The threads may be tight initially and a little bit of working them back and forth ahead of time and\/or a little vegetable oil may make this part smoother. Depending on the thickness of your hose you may not be able to completely screw the cap all the way, and this is OK. The point is to have the cap compress the retaining pins. Your final result will look like this:\u003cul\u003e\u003cli\u003e\u003cimg class=\"image_resized\" style=\"width: 50%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000662135\/design\/9c7e01a9-3ed1-4e49-ac0b-8b729ae62bb4.png\"\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesign by Adam L on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368106819888,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_a16876c0-7ac7-45ce-8c4d-8a8d73657d3f.jpg?v=1784020984"},{"product_id":"halloween-garden-hands","title":"Halloween Garden Hands","description":"\u003cp\u003eWelcome back, you can find these models for your plasure😊\u003c\/p\u003e\u003cp\u003e\u003cu\u003eClick to see more for other parts\u003c\/u\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eIf you like it, clic here, thanks😊\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003eYou can find skull model here:\u003c\/p\u003e\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/691018#profileId-619737\"\u003ehttps:\/\/makerworld.com\/en\/models\/691018#profileId-619737\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eHalloween Garden Feet:\u003c\/p\u003e\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/696999#profileId-625999\"\u003ehttps:\/\/makerworld.com\/en\/models\/696999#profileId-625999\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eHalloween Garden Skeleton Hands:\u003c\/p\u003e\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/711104#profileId-641517\"\u003ehttps:\/\/makerworld.com\/en\/models\/711104#profileId-641517\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/1887525-halloween-ribs\"\u003e\u003cstrong\u003eHalloween Ribs\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/1887525-halloween-ribs#profileId-2021698\"\u003ehttps:\/\/makerworld.com\/en\/models\/1887525-halloween-ribs#profileId-2021698\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e------------------------------\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eHi, my name is Vincent and I am the creator of the mounting floor mechanism for this design, as well as the photographer of the image used.\u003cbr\u003e \u003c\/p\u003e\u003cp\u003eRemember that this file is generously provided for free, so please make sure that everyone else also has the opportunity for free access to this design.\u003c\/p\u003e\u003cp\u003eIf you want to share this design, remember that Makerworld attribution credits require you to credit myself, as well as the remixed designs from users: scampbell, RenatoT, magiczztab, FOR63. In addition, you have to provide a link to this post.\u003c\/p\u003e\u003cp\u003eAlso remember that this photo is not protected by Makerworld policy and any upload of this photo that is not a reference to this linked page is in violation of the copyright.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eCreepy Reaching Hand by Scampbell:\u003c\/p\u003e\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.thingiverse.com\/thing:1524972\"\u003ehttps:\/\/www.thingiverse.com\/thing:1524972\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDevilman Hand by RenatoT:\u003c\/p\u003e\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.thingiverse.com\/thing:744549\"\u003ehttps:\/\/www.thingiverse.com\/thing:744549\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eJust a creepy hand by magiczztab:\u003c\/p\u003e\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.thingiverse.com\/thing:629024\"\u003ehttps:\/\/www.thingiverse.com\/thing:629024\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eReaching Wall Hands by FOR63:\u003c\/p\u003e\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.thingiverse.com\/thing:3923735\"\u003ehttps:\/\/www.thingiverse.com\/thing:3923735\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesign by Vincentbcd on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368119238960,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_2117bdf6-303e-4f8d-a098-3208b9071b9b.png?v=1784021773"},{"product_id":"grow-tent-scrog-trellis-net-frame","title":"Grow tent Scrog trellis net frame","description":"\u003cp\u003eQuick and easy print for creating a trellis scrog net in your grow tent. All you need is 16mm PVC pipe (4 corners, 4 for the width, and 4 or 5 short ones for the depth). \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eSimple print, no support or brim needed.\u003c\/p\u003e\u003cp\u003eDesign by leving on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368146305328,"sku":null,"price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_d0054083-8041-4081-8380-7fcdc5a943a4.png?v=1784023027"},{"product_id":"plant-support","title":"Plant support","description":"\u003ch2\u003ePlant support\u003c\/h2\u003e\u003cp\u003e\u003cbr\u003eThere is 4 parts:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003e10 cm shaft\u003c\/li\u003e\n\u003cli\u003e5 cm shaft\u003c\/li\u003e\n\u003cli\u003ehorizontal holder\u003c\/li\u003e\n\u003cli\u003evertical holder\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e0,05 mm tolerances for connecting parts. Fits snugly without glue.\u003c\/p\u003e\u003cp\u003eDesign by Mandelbox on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368156201264,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_e5de1d60-f1b8-4b5f-b4d6-0764c2947fc4.png?v=1784023624"},{"product_id":"ibc-reduction-with-quickrelease-for-garden-hose","title":"IBC reduction with quickrelease for garden hose","description":"\u003cp\u003e\u003cspan style=\"font-size: 16px\"\u003eCap for 1000l IBC tank for garden hose with quick connect system.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eDesign by JokerTheReal on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368165802288,"sku":null,"price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_ddabdb64-aa72-4793-b934-96535d7e4fbb.png?v=1784024290"},{"product_id":"garden-name-stakes","title":"Garden Name Stakes","description":"\u003cp\u003eA collection of garden stakes for your garden! Simple and clear what the plant is.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eGentle Reminder that if you print this in PLA it will bend and droop in the hot sun. Consider ABS\/ASA.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eList of stakes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCabbage\u003c\/li\u003e\n\u003cli\u003eSpring Onion\u003c\/li\u003e\n\u003cli\u003eFools Pepper\u003c\/li\u003e\n\u003cli\u003eRadish\u003c\/li\u003e\n\u003cli\u003ePotato\u003c\/li\u003e\n\u003cli\u003ePumpkin\u003c\/li\u003e\n\u003cli\u003eSpinach\u003c\/li\u003e\n\u003cli\u003eOkra\u003c\/li\u003e\n\u003cli\u003eSquash\u003c\/li\u003e\n\u003cli\u003eCucumber\u003c\/li\u003e\n\u003cli\u003eBroccoli\u003c\/li\u003e\n\u003cli\u003eBok Choy\u003c\/li\u003e\n\u003cli\u003eStrawberry\u003c\/li\u003e\n\u003cli\u003eLettuce\u003c\/li\u003e\n\u003cli\u003eCarrots\u003c\/li\u003e\n\u003cli\u003eSnap Pea\u003c\/li\u003e\n\u003cli\u003eTomato\u003c\/li\u003e\n\u003cli\u003ePepper\u003c\/li\u003e\n\u003cli\u003eTurnip\u003c\/li\u003e\n\u003cli\u003eBeans\u003c\/li\u003e\n\u003cli\u003eOnion\u003c\/li\u003e\n\u003cli\u003eBeets\u003c\/li\u003e\n\u003cli\u003ePeas\u003c\/li\u003e\n\u003cli\u003eEggplant\u003c\/li\u003e\n\u003cli\u003eM Cucumber\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDesign by codydshane on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368195096880,"sku":null,"price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_eb9fec05-5fc9-488a-9f72-f3b695a6a84a.png?v=1784025750"},{"product_id":"turtle-plant-trellis","title":"Turtle plant trellis","description":"\u003cp\u003eMy first design! a simple plant trellis size it up how big or small you need it!\u003c\/p\u003e\u003cp\u003eDesign by Tothemax87 on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368265875760,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_2e6972cb-dfe8-4fce-908f-f08db8731523.png?v=1784029224"},{"product_id":"square-plant-plate","title":"Square Plant Plate","description":"\u003ch2\u003e\u003cstrong\u003eSquare Plant Saucer\u003c\/strong\u003e\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCouldn't find a square plant saucer for my square plants, so I made my own!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eInside dimensions are 100mmx100mm\u003c\/p\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003c\/boostme\u003e\u003cp\u003eDesign by Stehr on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368279343408,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_602ce06a-9245-4546-914d-85e2a13db63c.png?v=1784030465"},{"product_id":"plant-trellis","title":"Plant Trellis","description":"\u003cp\u003eAnother plant support! can be scaled up or down! Sturdy and also Flexible to allow your plants to climb to new heights! Print yours today!\u003c\/p\u003e\u003cp\u003eDesign by Tothemax87 on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368295956784,"sku":null,"price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_c1ed595b-76a4-41d9-afcd-ed9921208805.png?v=1784032182"},{"product_id":"garden-gnome-dwarf","title":"Garden Gnome, Dwarf","description":"\u003cp\u003eHello,\u003c\/p\u003e\u003cp\u003eWelcome to my profile, full of models and miniatures :-)\u003c\/p\u003e\u003cp\u003eI have a Garden Gnome for you for a diorama, or just for play. Very nice figures. It is suitable for coloring. My children absolutely love it :-).\u003cbr\u003eImportant: If the figure does not stand and somehow gets bent, you need to take a lighter, gently heat the legs and bend them as needed. Then the problem will be solved.\u003cbr\u003eIt prints really well.\u003c\/p\u003e\u003cp\u003eI used Anycubic PLA Basic as the material\u003c\/p\u003e\u003cp\u003eYou need to use supports!\u003c\/p\u003e\u003cp\u003eIf you are interested in my work, the links are here:\u003c\/p\u003e\u003cp\u003ehttps:\/\/www.instagram.com\/ainon3dprint\/\u003c\/p\u003e\u003cp\u003ehttps:\/\/www.tiktok.com\/@ainon3dtisk\u003c\/p\u003e\u003cp\u003ehttps:\/\/www.patreon.com\/Ainon3Dprint\u003c\/p\u003e\u003cp\u003eThank you for the support, I am happy :-)\u003cbr\u003eHave a nice day\u003c\/p\u003e\u003cp\u003eDesign by Ainon3Dprint on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368383512880,"sku":null,"price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_61b5bd3f-8fac-4a12-a371-fb54662fce8b.png?v=1784034965"},{"product_id":"plant-pot-stand-riser","title":"Plant pot stand\/riser","description":"\u003cp\u003ePlant pot riser to keep inner pot from sitting on the bottom of the outer pot. Gives plant a nice stable base to sit on.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e100mm diameter\u003cbr\u003e37mm tall\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesign by Gotforce on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368384168240,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_760f2a2b-af3b-48d3-8bee-5341968bc29c.png?v=1784035071"},{"product_id":"3-ring-and-2-ring-trellis","title":"3 Ring and 2 Ring Trellis'","description":"\u003cp\u003e7\" outer ring size for 3 Ring Trellis\u003c\/p\u003e\u003cp\u003e5 ¾\" outer ring size for 2 Ring Trellis\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eFour plates to print with different spacing on stakes. 2\" and 3\" spacing as measured from outsides of stakes. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eI have only tested these prints using Bambu Lab Basic PLA (Black\/White and a few other colors) No specific material is required, however I have only used PLA.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThank you all for your reviews and pictures with different colors! \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThese extra options came from interest from the community.  Feel free to contact me for any other sizes you would like to see.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eCreated this simple Three Ring trellis for my wife when we couldn't find what she was looking for. This is the first model I created and would like any support if you enjoy the print! Thanks!\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesign by Aronvorn on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368413561136,"sku":null,"price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_91b13021-c0f6-44e9-be99-d598f093736d.png?v=1784036340"},{"product_id":"hardworking-dwarfs-gnomes-for-the-garden","title":"Hardworking dwarfs, gnomes for the garden","description":"\u003cp\u003e\u003cstrong\u003eHello,\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eWelcome to my profile, full of models and miniatures :-)\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch3\u003eI have for you Hardworking Dwarfs, gnomes for the garden. Very nice characters. It is suitable for coloring. My children absolutely love it :-).\u003c\/h3\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eImportant: If by chance the character does not stand and somehow wobbles, you need to take a lighter, gently heat the legs and bend them as needed. Then the problem will be solved.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eIt prints really well.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eI used Bambulab \u003cu\u003ePLA Basic\u003c\/u\u003e as the material\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003ci\u003eYou need to use supports!\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIf you are interested in my work, the links are here:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ehttps:\/\/www.instagram.com\/ainon3dprint\/\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ehttps:\/\/www.tiktok.com\/@ainon3dtisk\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ehttps:\/\/www.patreon.com\/Ainon3Dprint\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003ci\u003eThank you for the support, I am happy :-)\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003e\u003ci\u003eHave a nice day\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003eDesign by Ainon3Dprint on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368414839088,"sku":null,"price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_3532d5ee-957c-466d-b851-fc01112aa606.png?v=1784036369"},{"product_id":"mid-century-modern-ribbed-planter-with-drip-tray","title":"Mid Century Modern Ribbed Planter with Drip Tray","description":"\u003cp\u003e🎯 Recommended Print Settings \u003c\/p\u003e\u003cp\u003eFor Best Results Print this design with a standard 0.4mm nozzle at 0.24mm layer height for that sweet spot between speed and detail. We're keeping it lightweight with just 8% infill, which gives plenty of stability while saving on material.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e⚡ Speed vs. Quality Trade-off \u003c\/p\u003e\u003cp\u003eWhile these settings are optimized for a 0.4mm nozzle (the tried-and-true standard), I've gotten fantastic results using a 0.6mm nozzle. Honestly its harder to tell the difference sometime. The larger nozzle significantly cuts down print time and produces surprisingly robust prints. Feel free to experiment – the model scales beautifully at any size!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e🙏 If my designs bring a little joy to your day, you can support my work by buying me a coffee. Your support means the world! or you can \u003cstrong\u003eboost me for free\u003c\/strong\u003e. Thank you\u003c\/p\u003e\u003cp\u003eDesign by Nordic Creativa on MakerWorld (license: BY-ND).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368521924912,"sku":null,"price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_8af9384e-79ed-46f3-bdb3-7459c83ad8a6.png?v=1784037804"},{"product_id":"plant-pin-pro","title":"Plant Pin Pro","description":"\u003cp\u003eIntroducing the Plant Pin Pro: the tiny titan for taming plant stalks and roots! Perfect for keeping your green buddies anchored in both soil and the wild world of passive hydroponics. The shorter pin nails it in regular soil, while its longer cousin is a champ in hydroponic substrates like seramis, lechuza pon, or perlite (but takes a pass on LECA).\u003c\/p\u003e\u003cp\u003eCrafted in UV-resilient and water-loving ASA material, with a robust 0.15mm layer, this pin stands tall without any support. Whether you're a soil enthusiast or a hydroponic hobbyist, just pin it and grin\u003c\/p\u003e\u003cp\u003eDesign by FROSTYPRINT on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368541487408,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_db118dac-a19b-49a0-8cb8-34c0362db75c.jpg?v=1784038099"},{"product_id":"editable-large-plant-tags","title":"Editable Large Plant Tags","description":"\u003cp\u003eLarge sturdy editable plant tags with raised text.  Edit the text directly in Bambu Studio.  Just double click on any text to edit it in the pop-up window (the text shape tool).  You do not need a prime tower.  These tags are about 7\" tall (185 mm) and the tops are 3\" wide (80 mm) to accommodate large easy-to-read text with a 0.4 mm nozzle.  They are nice and sturdy at 4 mm thick (0.16\") with 25% gyroid infill.  5 fit on an X1C\/P1P plate at once.  I use PETG for outdoor UV durability, but use whatever you like.  Add a planting date to your perennial plants.  Leave it off for annuals.  Include a variety if you like.  There is room on these tags for whatever you need, and they are strong and tall enough for the garden.\u003c\/p\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003ePlease boost my design.  I did the hard part for you, and it's free.\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003eDesign by ScottK on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368590377264,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_22a6e332-0b91-4597-9071-7fddf14b6c47.png?v=1784038875"}],"url":"https:\/\/mymadmanlab.com\/collections\/garden-outdoors.oembed?page=4","provider":"Mymadmanlab.com","version":"1.0","type":"link"}