{"title":"Kitchen \u0026 Dining","description":"\u003cp\u003eShop Kitchen \u0026amp; Dining — curated like Amazon. Products will appear here as the catalog grows.\u003c\/p\u003e","products":[{"product_id":"rope-bowl","title":"Rope Bowl","description":"\u003cp\u003eA rope spirals around to create a small decorative bowl. No special print settings needed.\u003c\/p\u003e\u003cp\u003eDesign by JamesThePrinter on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67355477115184,"sku":null,"price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/rope-bowl-0.png?v=1783708421"},{"product_id":"chef-knife-block-adapter-plate-babish-culinary-compatible","title":"Chef Knife Block Adapter Plate (Babish Culinary Compatible)","description":"\u003cp\u003eA knife storage adapter plate that lets you seamlessly integrate a Babish Culinary Universe knife into your existing wooden knife block, keeping it organized and easily accessible.\u003c\/p\u003e\u003cp\u003eLicense: CC BY-SA.\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67356149809456,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/knife-block-plate-0.png?v=1783738233"},{"product_id":"name-or-number-plate","title":"Name or Number Plate","description":"\u003cp\u003eA basic name\/number plate for any house or office, sized for everyday use.\u003c\/p\u003e\u003cp\u003eLicense: CC BY.\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67356170912048,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/name-plate-0.png?v=1783738948"},{"product_id":"standing-or-wall-mounted-build-plate-holder","title":"Standing or Wall Mounted Build Plate Holder","description":"\u003cp\u003eA holder for 3D printer build plates — stand it upright or mount it to a wall. Chamfered edges for easy insertion, staggered slots for multiple plates, and countersunk mounting holes.\u003c\/p\u003e\u003cp\u003eDesign licensed CC-BY, original design by KG3Dee on MakerWorld.\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67357614899504,"sku":null,"price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/60976-0.png?v=1783782229"},{"product_id":"frankenstein-lightswitch-plate","title":"Frankenstein Lightswitch Plate","description":"\u003cp\u003eA fun lightswitch plate with a classic monster-movie \"throw the switch\" theme. The blade is symmetrical in both ON and OFF positions, and the knob prints as a separate round piece that snaps onto the blade.\u003c\/p\u003e\u003cp\u003eLicensed under CC BY-SA.\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default","offer_id":67365471813936,"sku":null,"price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/95201-0.jpg?v=1783978891"},{"product_id":"mesh-bowl-free-commercial-license","title":"Mesh Bowl (Free Commercial License)","description":"\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eYour Boosts Helps Me Create More Free Models! Thank You Very Much!\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003ch3\u003e\u003cstrong\u003e\u003cu\u003eMesh Bowl\u003c\/u\u003e\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eElevate your space with this sleek, 3D-printable \u003cstrong\u003eMesh Bowl\u003c\/strong\u003e — a modern, minimalist container ideal for decor, storage, or gifting. Featuring a dynamic mesh pattern and clean geometric curves, this design strikes the perfect balance between aesthetics and function.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e🖨️ \u003cstrong\u003eOptimised for 3D printing\u003c\/strong\u003e – designed with no supports needed\u003c\/li\u003e\n\u003cli\u003e🧺 \u003cstrong\u003eFunctional \u0026amp; Decorative\u003c\/strong\u003e – great for holding fruit, keys, accessories, or as a modern centrepiece\u003c\/li\u003e\n\u003cli\u003e⚙️ \u003cstrong\u003eCustomisable\u003c\/strong\u003e – scale it up or down to fit your needs\u003c\/li\u003e\n\u003cli\u003e🌐 \u003cstrong\u003eMesh Texture\u003c\/strong\u003e – ensures airflow, lightweight structure, and visual appeal\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePrinting:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 walls\u003c\/li\u003e\n\u003cli\u003eslow down wall speed I printed 150mm\/s on Bambu Printer\u003c\/li\u003e\n\u003cli\u003e0.4mm nozzle \u003c\/li\u003e\n\u003cli\u003e0.2mm layer height\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCheck Out My Other Designs!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"image_resized\" style=\"width: 50.63%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001514079\/design\/2025-06-13_be8395aab82368.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"image_resized\" style=\"width: 50.69%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001514079\/design\/2025-06-13_29d67e29d0f118.jpg\"\u003e\u003c\/p\u003e\u003cp\u003eDesign by KL Worx on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67366162596144,"sku":null,"price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_9ca0eef7-23ae-4208-938d-2b559f21ea9c.png?v=1783992089"},{"product_id":"chopstick-gripper-holder-with-optional-letter","title":"Chopstick gripper \/ holder with optional letter","description":"\u003cp\u003eChopstick gripper \/ holder with optional letter. \u003c\/p\u003e\u003cp\u003eI made these for a kids party where a sushi platter was being served, each kid got their own with the first letter of their name.\u003c\/p\u003e\u003cp\u003eThe regular size holes variant was designed for the wood\/bamboo chopsticks that are stuck together and require snapping apart.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eFiles include;\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSTL files for each individual letter with the regular size holes (6.4mm diameter)\u003c\/li\u003e\n\u003cli\u003eSTL files and .3MF profiles with no letter (blank) in 3 sizes. \u003cul\u003e\n\u003cli\u003eSmall - 5.7mm diameter holes\u003c\/li\u003e\n\u003cli\u003eRegular - 6.4mm diameter holes\u003c\/li\u003e\n\u003cli\u003eLarge - 8.2mm diameter holes (supports needed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eScale to suit other chopsticks.\u003c\/p\u003e\u003cp\u003eI only needed supports on the Large variant.\u003c\/p\u003e\u003cp\u003ePLA, 0.2mm, strength BambuLab standard settings\u003c\/p\u003e\u003cp\u003eCreated from scratch but inspired by other designs.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eEdited 17\/03 to add small and large blank variants and tidy up descriptions.\u003c\/p\u003e\u003cp\u003eDesign by RynoRC on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67366609125680,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_e300b07f-fa29-49e5-baef-40295a42e65f.png?v=1784000364"},{"product_id":"no-junk-mail-plate-australian-aussie-version","title":"No Junk Mail Plate - Australian Aussie Version","description":"\u003cp\u003eI put this out for the guys to laugh a bit on their way back after dropping the junk mail that they are going to leave there any way! :p\u003c\/p\u003e\u003cp\u003eAlso to check how long that PLA lasts under the sun.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eHappy to create more for you guys hit me up with a message!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ePrinted in PLA:\u003c\/p\u003e\u003cp\u003e15% Grid Infill\u003c\/p\u003e\u003cp\u003e0.2mm Layer Height\u003c\/p\u003e\u003cp\u003e2 Walls\u003c\/p\u003e\u003cp\u003eIroning ON \u003c\/p\u003e\u003cp\u003eDesign by yousufrizwan on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67366844596528,"sku":null,"price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_63f6e720-1b59-45e4-a37d-f7387f592285.png?v=1784004871"},{"product_id":"a1-build-plate-aligner","title":"A1 Build Plate Aligner","description":"\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003c\/boostme\u003e\u003cp\u003eI am having issue with put my build plate on my A1.\u003c\/p\u003e\u003cp\u003eThe original guide does help aling the build plate, but I feel like those two on the side does not help that well, since it is so low to the printer bed. So I made this build plate aligner deisgn to help easier put you build plate down.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003ci\u003e\u003cstrong\u003eDue to the nozzle prime brush located on the left, and nozzle have travel a lot of the left, I don't think it worth the risk to put anything on the left.\u003c\/strong\u003e\u003c\/i\u003e Plus, this one on the right side is already good enough to help you locate the build build.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eIt cost very little filament, \u003ci\u003e\u003cstrong\u003eless than 5g\u003c\/strong\u003e\u003c\/i\u003e. Around \u003ci\u003e\u003cstrong\u003e19m printing time\u003c\/strong\u003e\u003c\/i\u003e. Suggests print at least with \u003ci\u003e\u003cstrong\u003ePETG, or ABS\u003c\/strong\u003e\u003c\/i\u003e.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003e\u003cspan style=\"color: #E14747\"\u003eATTENTION! If you are firmware version 01.01.50.24 or above, do not use other people's printing profile, model is not longer compare after firmware update. \u003c\/span\u003e\u003c\/h2\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eUpdate 1\/27\/2024: New model updated, name “for 01.01.50.24 firmware”. \u003c\/h2\u003e\u003ch3\u003eNew firmware version: 01.01.50.24(beta) will cause issue. I have found nozzle clumping detection cause the issue. It is automatically enabled after firmware update. But no option to disable it currently. More information from Bambu Wiki: \u003c\/h3\u003e\u003ch3\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/wiki.bambulab.com\/en\/a1-mini\/manual\/nozzle-warp-detection\"\u003ehttps:\/\/wiki.bambulab.com\/en\/a1-mini\/manual\/nozzle-warp-detection\u003c\/a\u003e \u003c\/h3\u003e\u003cp\u003e \u003c\/p\u003e\u003ch3\u003eIssue description: \u003c\/h3\u003e\u003cp\u003eAfter update firmware 0.1.01.50.24. Print stops randomly in the middle and error note shows: \u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000124090\/design\/2024-01-27_271f7f17e33c4.png\"\u003e\u003c\/figure\u003e\u003cp\u003e Nozzle will park on the aliger area and cuase issue. \u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000124090\/design\/2024-01-27_b0eecdf4e5003.png\"\u003e\u003c\/figure\u003e\u003cp\u003e According to BBL Wiki: \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\"1. After printing all the walls of the first object on the third layer of this plate, the tool head will move to the position of the purge wiper for the first detection.\u003c\/strong\u003e\u003cspan style=\"background-color: rgb(255,255,255); color: rgb(66,66,66); font-size: 16px\"\u003e The specific coordinates of the nozzle during detection:  A1 mini (X-6, Y 170, Z-1); A1 (X 261, Y 250, Z-1). The detection process is shown in the following figure.\u003c\/span\u003e\u003cstrong\u003e \" \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eInstall guide:\u003c\/h2\u003e\u003cp\u003eAlign from the back, push the aligner pin into the bolt hole under the build plate.\u003c\/p\u003e\u003cp\u003eConfrim top part is all the way in.\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000124090\/design\/2024-01-04_7cd7e48eb7b47.gif\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eMany revisions was made and many tests was done to confirm it not only works but also get good fit and finish:\u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 55%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000124090\/design\/2024-01-05_2c006911bca8.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eMaterial:\u003c\/h2\u003e\u003cp\u003eHighly suggest to print with ABS or better \u003ci\u003e\u003cstrong\u003eheat resistant material\u003c\/strong\u003e\u003c\/i\u003e. PETG Will works. PLA is not recommaned.\u003c\/p\u003e\u003cp\u003eI also made cut line design on alginer, those cut slots should help guiding the direction when thermal expansion and retraction happen. Which it should bond on the printer bed more if thermal deformation occurs.\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000124090\/design\/2024-01-04_ec38222ff07b3.png\"\u003e\u003c\/figure\u003e\u003cp\u003eDesign by SavageLau on MakerWorld (license: BY-ND).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67366877987120,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_a5180bf9-9d22-4c37-a287-7f99e53c6c3b.png?v=1784005532"},{"product_id":"knitted-bowl","title":"Knitted Bowl","description":"\u003cp\u003eThis decorative bowl features a knitted look. It is about the size of a large cereal bowl. It can be used purely for decoration or as a functional holder in your home or office.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePrint Settings\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause of the amount of triangles in this model, slicing times will be longer than usual!\u003c\/p\u003e\u003cp\u003eTo reduce print time, I recommend using the standard infill for the first 2mm of the print, then using 0% infill afterwards. For a cleaner finish on the top of the bowl, you can lower your layer height (0.1mm-0.12mm) for the last millimeter.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe following filaments were used in the pictures above:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ci\u003eBambu Lab Matte Sakura Pink PLA\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eBambu Lab Matte Scarlet Red PLA\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eBambu Lab Crimson Sparkle PLA\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eBambu Lab Translucent Teal PETG\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eInland Lulz Green PLA\u003c\/i\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDesign by JamesThePrinter on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67366944670000,"sku":null,"price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_41fb8a90-8d78-4273-b120-5ede8e382138.png?v=1784006716"},{"product_id":"mjolnir-one-plate","title":"Mjolnir one plate","description":"\u003cp\u003eall parts in one plate, megnet 6x3mm\u003c\/p\u003e\u003cp\u003eDesign by Tojo on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367010140464,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_5bd6f027-d7ce-4d15-8f42-a7b69c1d79f1.png?v=1784007828"},{"product_id":"yarn-bowl","title":"Yarn Bowl","description":"\u003cdiv\u003e\n\u003ch1\u003eSummary\u003c\/h1\u003e\n\u003cdiv\u003e\n\u003cp\u003eThis design is based on a wooden yarn bowl my SO found in a store for \u0026gt;$45. I took some artistic liberty when copying the design.\u003cbr\u003eTo aid in fulfilling its purpose I made the bottom large and flat while the inside is as smooth as possible to allow for the yarn to roll around easily.\u003c\/p\u003e\n\u003cp\u003eI recommend getting a rubber pad or some other kind of anti-slip material to stick to the bottom.\u003c\/p\u003e\n\u003cp\u003eI printed this in Colorfabb Woodfill and finished with some light sanding (more on the inside to let the yarn roll smoothly) and a transparent mahogany varnish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch1\u003ePrint Settings\u003c\/h1\u003e\n\u003cp class=\"detail-setting printer brand\"\u003e\u003cstrong\u003ePrinter Brand: \u003c\/strong\u003e                         \u003c\/p\u003e\n\u003cdiv\u003e\u003cp\u003ePrusa\u003c\/p\u003e\u003c\/div\u003e                                    \u003cpre\u003e\u003ccode\u003e                                            \u003cp class=\"detail-setting printer\"\u003e\u003cstrong\u003ePrinter: \u003c\/strong\u003e                     \u003c\/p\u003e\n\u003cdiv\u003e\u003cp\u003ei3 MK3\u003c\/p\u003e\u003c\/div\u003e\u003c\/code\u003e\u003c\/pre\u003e\n\u003cp\u003e\u003c\/p\u003e                                    \u003cp class=\"detail-setting rafts\"\u003e\u003cstrong\u003eRafts: \u003c\/strong\u003e                         \u003c\/p\u003e\n\u003cdiv\u003e\u003cp\u003eNo\u003c\/p\u003e\u003c\/div\u003e                                    \u003cpre\u003e\u003ccode\u003e                                            \u003cp class=\"detail-setting supports\"\u003e\u003cstrong\u003eSupports: \u003c\/strong\u003e                     \u003c\/p\u003e\n\u003cdiv\u003e\u003cp\u003eYes\u003c\/p\u003e\u003c\/div\u003e\u003c\/code\u003e\u003c\/pre\u003e\n\u003cp\u003e\u003c\/p\u003e                                    \u003cp class=\"detail-setting resolution\"\u003e\u003cstrong\u003eResolution: \u003c\/strong\u003e                         \u003c\/p\u003e\n\u003cdiv\u003e\u003cp\u003e0.2mm\u003c\/p\u003e\u003c\/div\u003e                                    \u003cpre\u003e\u003ccode\u003e                                            \u003cp class=\"detail-setting infill\"\u003e\u003cstrong\u003eInfill: \u003c\/strong\u003e                     \u003c\/p\u003e\n\u003cdiv\u003e\u003cp\u003e20%\u003c\/p\u003e\u003c\/div\u003e\u003c\/code\u003e\u003c\/pre\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cp class=\"detail-setting notes\"\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cp\u003eI printed this in Colorfabb Woodfill and am in the process of sanding, staining and coating it.\u003cbr\u003e\u003cbr\u003eIf your printer can handle overhangs of 50 degrees it will require minimal supports, only on the details. As you can see in the picture supports printed in woodfill are\u003cbr\u003e\u003cbr\u003eeasy to remove without damaging the print.\u003cbr\u003e\u003cbr\u003eI highly recommend using a woodfill type filament for this.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\u003cp\u003eDesign by Cherry Labs on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367016530224,"sku":null,"price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_a3db54c5-625c-4234-9329-df2e032cd790.jpg?v=1784007989"},{"product_id":"boho-mushroom-bowl","title":"Boho mushroom Bowl","description":"\u003cp\u003e(Free for commercial license!) These look amazing in rainbow colors! Only needs one small support for the bottom of the loop in front, I would add a brim to the support just in case!\u003c\/p\u003e\u003cp\u003eDesign by AcmeArt on MakerWorld (license: BY-ND).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367138689328,"sku":null,"price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_5f391307-f599-4673-b687-dc9e9d849862.png?v=1784009983"},{"product_id":"plate-link-chain-bracelet","title":"Plate Link Chain Bracelet","description":"\u003cp\u003eSeamless chain 18cm (25 links) - can be chained or add single links (10 or 1) to adapt.\u003c\/p\u003e\u003cp\u003e0.15 clearance.\u003c\/p\u003e\u003cp\u003eDesign by Jack on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367150125360,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_ff4f7979-8af7-4eca-aed1-6e9bcc0e2f69.png?v=1784010209"},{"product_id":"print-plate-bed-scraper","title":"Print plate bed scraper","description":"\u003cp\u003ePrint in PLA so that you dont damage your print bed\u003c\/p\u003e\u003cp\u003eDesign by lu_print on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367184138544,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_f00f048c-dcef-4696-9119-f69b6b1321a2.png?v=1784010890"},{"product_id":"serving-tray","title":"Serving tray","description":"\u003cp\u003eIntroducing a highly customizable and modular serving tray, designed with the innovative maker in mind and shared in BambuLab's MakerWorld. This 3D-printed masterpiece is not just a serving tray; it's a versatile tool for every entertainer. With its independent, interlocking pieces, it can be reconfigured into various shapes to suit any serving needs. Need a long tray for breadsticks? A compact square for dips? Or an L-shape for a variety of snacks? This design has got you covered. Made with precision and creativity, it demonstrates the endless possibilities of 3D printing, allowing hosts to change the tray's form to match the function required at any event. Dive into the world of modular design and print your way to your next memorable party with this one-of-a-kind serving solution.\u003c\/p\u003e\u003cp\u003eDesign by smooki on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367242531120,"sku":null,"price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_e68a14c8-878e-45f9-9bd7-e55adffc5153.png?v=1784011385"},{"product_id":"plate-for-dolls","title":"plate for dolls","description":"\u003ch2\u003e\u003cstrong\u003eplate for dolls\u003c\/strong\u003e\u003c\/h2\u003e\u003cp\u003eDesign by Cool Prints on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367271334192,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_abeb2d72-fdfe-406a-b661-27540c540a59.png?v=1784011965"},{"product_id":"dollhouse-plate-perfect-lego_size","title":"Dollhouse Plate perfect Lego_size","description":"\u003cp\u003eQuick and easy to print plate for a dollhouse. Printed in less than 2 minutes.\u003c\/p\u003e\u003cp\u003eWith a diameter of approx 14mm, it is the perfect size for LegoMinifigures, for example.\u003c\/p\u003e\u003cp\u003eBut it can be scaled to any size.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eSchnell und einfach zu druckender Teller für ein Puppenhaus. Gedruckt in weniger als 2 minuten\u003c\/p\u003e\u003cp\u003eMit ca. 14mm Durchmesser hat er die perfekte Größe für z.B. LegoMinifiguren.\u003c\/p\u003e\u003cp\u003eEr kann aber auf jede beliebige Größe skaliert werden.\u003c\/p\u003e\u003cp\u003eDesign by SuperbWinni on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367335199024,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_2048bad5-75cd-4e03-97c6-e758dc8d02f4.png?v=1784012962"},{"product_id":"big-size-trophy-and-customizable-plate-and-base","title":"Big Size trophy and customizable plate and base","description":"\u003cp\u003eI needed a big size trophy, and loved the \u003ca target=\"_blank\" href=\"https:\/\/makerworld.com\/models\/126236\" rel=\"nofollow noopener ugc\"\u003e\u003cstrong\u003eminimalistic lowpoly trophy with base\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e \u003c\/strong\u003efrom DrJones so I adapted his file to be make it much bigger. I also made my own base to fit with the top along with a customizable plate where you can add the text you need. The plate perfectly fits the place where it is supposed to be glued on the base. On the picture, the print have been made like this:\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTrophy and Plate\u003c\/strong\u003e\u003cbr\u003e0,08mm High Quality on a BBL X1C\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBase\u003c\/strong\u003e\u003cbr\u003e0,12mm high quality on a BBL X1C\u003cbr\u003e\u003cbr\u003eThe rest of the parameters are in the 3MF files.\u003cbr\u003e\u003cbr\u003eTo access the base and plate files, clic on download or print \u0026gt; download STL\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eIf you have any question, please let me know.\u003cbr\u003e \u003c\/p\u003e\u003cp\u003eDesign by X-oR on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367407288624,"sku":null,"price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_2f6b942b-f160-4996-b9c9-d6ffd3b963a6.png?v=1784013897"},{"product_id":"bowl-with-scales","title":"Bowl With Scales","description":"\u003cp\u003ecool looking bowl with a scale texture \u003c\/p\u003e\u003cp\u003eDesign by PoolHallKing on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367411843376,"sku":null,"price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_720fde0b-a990-4d55-894a-c8bdc1d651f1.png?v=1784013919"},{"product_id":"improved-best-spoon-rest-ever","title":"Improved best spoon rest ever","description":"\u003cp\u003eAfter printing the original model of the “Best Spoon Rest Ever”, it served well the purpose but quickly broke at the root of the “fingers”.\u003c\/p\u003e\u003cp\u003eThe model geometry is good but the structural element is somewhat fragile for an abused (at least in my home :P) functioning part.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eSo I modified 3D model based on the FreeCAD file, creating a draft angle on the main stressed region of the part.\u003c\/p\u003e\u003cp\u003eI also increased the fillet radius of the \"sauce pool\", so it's easier to clean.\u003c\/p\u003e\u003cp\u003eDesign by Danilo Lattaro on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367498711344,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_ad36c841-3a48-4eaf-9af1-fdc1635b6bf1.png?v=1784014310"},{"product_id":"star-trek-license-plate-frame-to-boldly-go","title":"Star Trek License Plate Frame [TO BOLDLY GO]","description":"\u003cp\u003eI used default support settings and the default settings for 20mm strength setting on Bambu Labs splicer. Used super glue to bring the two halves together.\u003c\/p\u003e\u003cp\u003eFont added from Shapr3D (edge of the galaxy font)\u003c\/p\u003e\u003cp\u003eDesign by jvg.network on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367580107056,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_e7ecc948-f603-4fd2-9728-dfb058938530.png?v=1784015452"},{"product_id":"paper-plate-support-with-thumb-ring-9-22-8-cm","title":"Paper Plate Support with Thumb Ring - 9\"\/22.8 cm","description":"\u003cp\u003eMake your outdoor meals easier with this 3D printable paper plate holder! It’s designed to keep your plate steady and has a handy ring for your thumb so you can get a better grip. Perfect for picnics, barbecues, and parties, this holder keeps your plate from wobbling or folding and helps prevent spills.\u003c\/p\u003e\u003cp\u003eDesign by andrewmalaty8 on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367787168048,"sku":null,"price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_2eb06c5e-c585-44ca-bec7-150680cc4aac.png?v=1784017189"},{"product_id":"cocktail-fork","title":"Cocktail Fork","description":"\u003cp\u003eFruit fork \u003c\/p\u003e\u003cp\u003eDesign by Jack on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367903494448,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_e8a26d63-cd0d-4d9b-bd70-28569d5510a7.png?v=1784018130"},{"product_id":"serving-basket","title":"Serving Basket","description":"\u003cp\u003eI created this approximate functional replica of your standard and traditional restaurant serving basket because I didn't want to do the dishes, and I didn't want to go out and buy serving baskets. It's enough to fit a small sandwich and a side or one larger sandwich with wax paper or foil. DO NOT EAT DIRECTLY OFF THE PLASTIC and DO NOT MICROWAVE. Even though we already have microplastics coursing through our veins, it would be in your best interest to not add to the problem by ingesting more. \u003c\/p\u003e\u003cp\u003eDesign by Parker on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368001667376,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_a345a7ae-8c33-47e1-8b85-cde72aa8e21e.png?v=1784019144"},{"product_id":"enrichment-slow-feed-bowl","title":"Enrichment \/ slow feed bowl","description":"\u003cp\u003eA little activity bowl to make meal time more fun and last longer\u003c\/p\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eIf your pet like it lmk in the comments, post a picture or support me with a boost if you can :) \u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003eDesign by toiavalle on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368001995056,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_dcff49b0-74f2-4191-a19e-f7cdb90a793c.png?v=1784019161"},{"product_id":"fruit-bowl","title":"Fruit Bowl","description":"\u003cp\u003eFruit bowl with fuzzy skin.\u003c\/p\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003c\/boostme\u003e\u003cp\u003eDesign by 3D Van Reeth on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368020181296,"sku":null,"price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_dcf12576-658e-4000-8dc4-c3d62f52ce82.png?v=1784019898"},{"product_id":"halloween-candy-bowl","title":"Halloween Candy Bowl","description":"\u003cp\u003eThis Halloween-themed candy bowl is perfect for the candy giver! With a 9-inch diameter, it can hold plenty of that sugary goodness! In the pictures above, the bowl is shown holding 4 bags of fun size candy bars!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePrint Settings\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNo supports required\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe following filament was used in the pictures above:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ci\u003eBambu Lab Matte Mandarin Orange PLA\u003c\/i\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eDesign by JamesThePrinter on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368020443440,"sku":null,"price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_d87f3b00-d7fe-46ea-8c0c-a2ef8be2a47f.png?v=1784019916"},{"product_id":"simple-universal-bowl","title":"Simple Universal Bowl","description":"\u003ch2\u003e\u003cstrong\u003eSimple 3d printed bowl!\u003c\/strong\u003e\u003c\/h2\u003e\u003ch3\u003e\u003cstrong\u003eYou can use it for:\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHalloween\u003c\/li\u003e\n\u003cli\u003eFruit\u003c\/li\u003e\n\u003cli\u003eCables\u003c\/li\u003e\n\u003cli\u003eDrugs\u003c\/li\u003e\n\u003cli\u003eBricks or toys\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePrint without supports. Size is about 210mm x 210mm x 60mm.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThank you for printing my models!\u003c\/strong\u003e\u003c\/p\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eIt really helps me!\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003eDesign by Gerardasst on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368052556080,"sku":null,"price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_c5920074-2dcb-45fd-8cd3-03bd79fc678d.png?v=1784020266"},{"product_id":"pistachio-peanut-bowl-with-holes","title":"Pistachio\/Peanut bowl with holes","description":"\u003ch2\u003e\u003cstrong\u003ePistachio Bowl (Pistachio\/Peanut Bowl with Holes) — Remix\u003c\/strong\u003e\u003c\/h2\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eI'll be happy to receive a Boost if you like the model! :) Thanks! \u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003eIntroducing the \u003cstrong\u003ePistachio Bowl\u003c\/strong\u003e—a clever remix of a model originally from Printables. Designed to be elegant yet functional, it features a patterned structure with evenly spaced holes that hint at the removable shells within. This bowl merges practicality with aesthetic simplicity, ideal for serving pistachios, snacks, or small treats.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eRecommended Print Settings\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill (Cubic \/ Grid):\u003c\/strong\u003e 10% – ideal for maintaining structural integrity while saving material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall Loops:\u003c\/strong\u003e 4 – balances sturdiness and precision on the exterior\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Pattern:\u003c\/strong\u003e Monotonic — ensures a clean, consistent finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLayer Height:\u003c\/strong\u003e 0.2 mm — excellent compromise between print speed and detail\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis pistachio bowl remix combines elegant design with practical printability. The subtle hole pattern and balanced infill make it both visually appealing and structurally sound—perfect for snack lovers or collectors of thoughtful 3D-printed kitchenware.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesign by LayerSmith on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368099250480,"sku":null,"price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_9e9903ab-2434-4ca3-b45a-3568e1d45f73.png?v=1784020571"},{"product_id":"skull-yarn-bowl","title":"Skull yarn bowl","description":"\u003ccommercialme\u003e\u003ccommercialtitle\u003eMembership\u003c\/commercialtitle\u003e\u003ccommercialcontent\u003eClick here to join our subscription program today! Includes commercial resale license for all of our models.\u003c\/commercialcontent\u003e\u003c\/commercialme\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #E14747\"\u003e\u003cstrong\u003eNote: New Print Profile!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eI have never had an issue printing the original print profile I created, but some people have had problems with the “swirl” breaking during prints, especially using silk filaments. I updated the print file (named “stronger supports”) that have helped some, but others still report problems.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eI have added yet another print profile. This has more extensive tree support, with thicker tree walls, and a better z-interface and z-height. I've also changed the strength to 3 walls--this will hopefully provide additional strength and support to that thin area around the swirl, so that it doesn't fall\/break easily while printing.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe new profile has smoother support interfaces, but be aware that, especially when dealing with yarn, anything with supports may require some post processing. \u003cstrong\u003eThat's the nature of 3d printing\u003c\/strong\u003e, and not a failure of the model. I've had a few people ding me because of the post processing need. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eNote that because of these changes, this most recent profile has slightly longer print times and more filament use.\u003c\/p\u003e\u003cp\u003e------------------------------------\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eI printed the \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/30487#profileId-26985\"\u003eskull bowl\u003c\/a\u003e by \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/@Print4Gods\"\u003ePrint4Gods\u003c\/a\u003e, and a couple of people told me it would make a great yarn bowl.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eSo, I imported the skull into fusion, and dug a golden ratio out of one side to act as the ‘swirl’ in a yarn bowl that can be used for threading yarn. I dug out the eyes and nose to act as needle holders and\/or working with multiple colors. Lastly, that jagged top had to go. Roughness or pointy bits can snag on yarn, so I cut down until none of it remained.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEdit Dec 19, 2024: \u003c\/strong\u003e while hundreds of people have successfully downloaded and printed this profile, a few have reported issues with the swirl area breaking off during printing, even though it's supported. This especially seems to be a problem with some silk PLAs. I have created a second profile with more supports, on the build plate only. I've also switched to gyroid infill to reduce the chance of the nozzle striking the infill.  Hopefully this resolves the issue for those folks!  \u003ci\u003e\u003cstrong\u003ePlease note that even with the added supports, the spiral bit is delicate and requires a gentle touch when removing supports.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eNew pictures were taken with the updated profile in Amolen red-and-black dual extrusion silk PLA.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 29.8%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000652467\/design\/2024-12-20_ad72262a0c9a08.png\"\u003e\u003c\/figure\u003e\u003cfigure class=\"image image_resized\" style=\"width: 31.26%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000652467\/design\/2024-12-20_466fa7d256438.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesign by Printcraft on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368102756656,"sku":null,"price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_c74b85bf-fc5e-4840-9004-032122b56ff9.png?v=1784020599"},{"product_id":"重装板甲骑士-heavy-plate-knight-2-0","title":"重装板甲骑士-Heavy Plate Knight-2.0","description":"\u003cp\u003e对之前的重装板甲骑士的模型做了全面的调整，使得打印更加方便。\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e之前一作是刚接触3D打印的第一作，当时连切片软件中的切割命令和负零件命令都不会，所以都是在3Dmax软件中强行调整平面，所以导致打印效果不行。也是承蒙各位同好的喜爱，收获了不错的下载量，非常感谢各位以及dummy 13 的原作者所提供的优秀的骨架。我对前作做了全面的调整，希望各位喜欢。\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe previous model of the heavy plate armor knight has been fully adjusted to make printing more convenient.\u003c\/p\u003e\u003cp\u003eThe previous work was my first work when I was new to 3D printing. At that time, I didn’t even know the cutting command and negative part command in the slicing software, so I had to force the plane to be adjusted in the 3Dmax software, which resulted in poor printing results. Thanks to all of you for your love, I have received a good number of downloads. Thank you very much to everyone and the original author of dummy 13 for providing the excellent skeleton. I have made comprehensive adjustments to the previous work, and I hope you like it.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003e如果各位在这3D打印中收获了乐趣，还请助力我\u003cbr\u003eIf you have fun with 3D printing, please boost me.\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e修改内容：\u003c\/p\u003e\u003cp\u003e1：头盔部分调整了打印平面，沿用了dummy13 的头部卡扣\u003c\/p\u003e\u003cp\u003e2：肩甲和肩膀部分卡扣向内收，减少穿帮，增加了可动\u003c\/p\u003e\u003cp\u003e3：做了新标肩甲，表现一种龙鳞的效果，（如果觉得密恐还是用原来肩甲即可0.0）\u003c\/p\u003e\u003cp\u003e4：大臂肘部盔甲做了拉伸，对肘关节做了一定遮盖，改善了之前肘关节空洞穿帮的情况\u003c\/p\u003e\u003cp\u003e5：腰部侧裙甲的卡扣进行了加固\u003c\/p\u003e\u003cp\u003e6：侧裙甲也做出了龙鳞效果（如果觉得密恐还是用原来侧裙甲即可0.0）\u003c\/p\u003e\u003cp\u003e7：前后裙甲做了可动关节，不再会干涉腿部的活动，可以做出更多的pose，你甚至可以把他当做笔架\u003c\/p\u003e\u003cp\u003e8：胯部的卡扣进行了重新设计安装更加牢固，但是想保持更好的强度建议上胶水\u003c\/p\u003e\u003cp\u003e9：膝盖甲的凹槽重新设计了，减少了干涉，同时更加容易安装，但是想保持更好的强度建议上胶水\u003c\/p\u003e\u003cp\u003e10：增加了万圣的南瓜头部\u003c\/p\u003e\u003cp\u003e11：武器部分调整了打印平面，容易打印\u003c\/p\u003e\u003cp\u003e12：添加了新款带盔甲的手部\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #E14747\"\u003e\u003cstrong\u003e注意：为了比例以及安装的考量，对一部分骨架做了比例长度上的调整，所以骨架与原作dummy 13不通用\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #E14747\"\u003e\u003cstrong\u003e裙边和身体主体的大部分的支撑实际可以去除，我是为了打印的成功率所以加了很多裙边和支持，各位自行调整\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eModifications:\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e1: The printing plane of the helmet part was adjusted, and dummy13 was used. Head buckle\u003c\/p\u003e\u003cp\u003e2: Shoulder armor and shoulder buckle are retracted inward to reduce the gap and increase the mobility\u003c\/p\u003e\u003cp\u003e3: New shoulder armor is made to show a dragon scale effect (if you feel that you are afraid of dense, you can still use the original shoulder armor 0.0)\u003c\/p\u003e\u003cp\u003e4: The upper arm elbow armor is stretched to cover the elbow joint to improve the hollow elbow joint gap\u003c\/p\u003e\u003cp\u003e5: The buckle of the waist side skirt armor is reinforced\u003c\/p\u003e\u003cp\u003e6: The side skirt armor also has a dragon scale effect (if you feel that you are afraid of dense, you can still use the original side skirt armor 0.0)\u003c\/p\u003e\u003cp\u003e7: The front and rear skirt armors have movable joints, which will no longer interfere with the movement of the legs and can make more poses.You can even use it as a pen holder\u003c\/p\u003e\u003cp\u003e8: The buckle of the hips has been redesigned to make the installation more secure, but if you want to maintain better strength, it is recommended to glue\u003c\/p\u003e\u003cp\u003e9: The groove of the knee armor has been redesigned to reduce interference and make it easier to install, but if you want to maintain better strength, it is recommended to glue\u003c\/p\u003e\u003cp\u003e10: Added Halloween pumpkin head\u003c\/p\u003e\u003cp\u003e11: The printing plane of the weapon part has been adjusted for easy printing\u003c\/p\u003e\u003cp\u003e12: Added new armored hands\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #E14747\"\u003e\u003cstrong\u003eNote: For the sake of proportion and installation, some of the skeletons have been adjusted in length, so the skeleton is not compatible with the original dummy 13.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #E14747\"\u003e\u003cstrong\u003eThe skirt and most of the support of the body can actually be removed. I added a lot of skirts and supports for the success rate of printing. Please adjust them by yourself\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eDesign by 喵匠Meowcraft on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368102822192,"sku":null,"price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_a8d19b11-27e3-4265-b192-0edef507c636.png?v=1784020618"},{"product_id":"euro-hinge-mounting-plate-jig","title":"Euro hinge mounting plate jig","description":"\u003cp\u003eMounting plate jig for euro hinge on overlay doors.\u003c\/p\u003e\u003cp\u003ePrinted in 0.16 layer height with standard settings.\u003c\/p\u003e\u003cp\u003eDesign by KL Worx on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368104919344,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_fdb4bf83-fed4-4c52-ae4f-f66907cb88b3.png?v=1784020773"},{"product_id":"cute-room-number-name-plate-for-kids","title":"Cute room number\/name plate for kids","description":"\u003cp\u003eA room number sign I designed for the local daycare. I also included the step file so feel free to customize it.\u003c\/p\u003e\u003cp\u003eDesign by teezzz@MBC on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368110555440,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_6e1f997c-6407-429b-89ef-9bf25f43a494.png?v=1784021435"},{"product_id":"christmas-tree-shaped-snack-serving-tray","title":"Christmas Tree-Shaped Snack Serving Tray","description":"\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"background-color: rgb(255,255,255); color: rgb(34,34,34); font-size: 16px\"\u003eChristmas Tree-Shaped Snack Serving Tray\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"background-color: rgb(255,255,255); color: rgb(34,34,34); font-size: 16px\"\u003eThis is my contribute to your christmas. :D\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"background-color: rgb(255,255,255); color: rgb(34,34,34); font-size: 16px\"\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003cspan style=\"background-color: rgb(255,255,255); color: rgb(34,34,34); font-size: 16px\"\u003ePETg\u003c\/span\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"background-color: rgb(255,255,255); color: rgb(34,34,34); font-size: 16px\"\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"background-color: rgb(255,255,255); color: rgb(34,34,34); font-size: 16px\"\u003e3 diferents sizes, but you can change on your Bambu Studio.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eModel 1\u003c\/li\u003e\n\u003cli\u003e\u003cfigure class=\"image image_resized\" style=\"width: 37.34%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000757093\/design\/2024-11-04_980d0ecfc0b79.jpg\"\u003e\u003c\/figure\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModel 2\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003cli\u003e\u003cfigure class=\"image image_resized\" style=\"width: 37.5%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000757093\/design\/2024-11-04_daacc299b27ce.jpg\"\u003e\u003c\/figure\u003e\u003c\/li\u003e\n\u003cli\u003eModel 3\u003c\/li\u003e\n\u003c\/ul\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000757093\/design\/2024-11-04_0e78b91cb2103.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003eDesign by Alexandre Paixao on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368157610288,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_42ca9cf9-8704-49ad-861e-ed8fbf509302.png?v=1784023833"},{"product_id":"american-bully-with-dumbbell-plate-wall-art","title":"American bully with dumbbell (plate wall art)","description":"\u003cp\u003eamerican bully with dumbbell\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesign by Reybrond on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368231403824,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_cfb5047d-03dd-4779-a6c0-dae8342f5629.png?v=1784027077"},{"product_id":"paw-print-name-plate","title":"Paw Print Name Plate","description":"\u003cp\u003eOkay, had to make a quick name tag for a Christmas gift, and then was asked for another 10.  Thought I would share all the files, for those who may want to utilize it and save some time. ( I am currently learning OpenCAD, so make this customizable on the this site, but it is not going too well.)  Please feel free to use all the blank templates and have fun.  SolidWorks file has been added so you can adjust the name to what ever you would like!  Enjoy.\u003c\/p\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eI would really appreciate a Boost if you have a spare!\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ePrinted in Hyper Purple, PLA - 15% infill.\u003c\/p\u003e\u003cp\u003eDesign by GSGSG on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368239857968,"sku":null,"price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_1adcf7e0-336e-44dd-a993-bc88f99f9f7b.png?v=1784027310"},{"product_id":"fishing-spoon-lure-for-pike","title":"Fishing spoon \/ lure for pike","description":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThis was an old project I just came across and thought I should share it before is lost.\u003c\/p\u003e\u003cp\u003eFor best result, I remember printing the spoon in PETG , 100% infill\u003c\/p\u003e\u003cp\u003eThe holes in the body will take 5mm bearing balls and you can use wood filler to cover everything.\u003c\/p\u003e\u003cp\u003eI also used small size stainless steel screw eyes glued with epoxy.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesign by marius.chirita.uk on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368244904240,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_577ac0c9-f6ec-449c-b48a-2f3d2f9b87e1.jpg?v=1784027445"},{"product_id":"simple-small-bowl-35min-25g","title":"Simple small bowl \u003c35min \u003c25g","description":"\u003cp\u003eHi guys here is a simple and small bowl perfect for like M\u0026amp;Ms etc.\u003c\/p\u003e\u003cp\u003eYou can adjust the size to your liking on Bambu Studio.\u003c\/p\u003e\u003cp\u003ei gave mine to my mom, she uses it for bird food.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003c\/boostme\u003e\u003cp\u003eDesign by Yurgin93 on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368252473648,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_06b41912-a121-4028-a66a-0a6ca1df888d.png?v=1784027918"},{"product_id":"simple-flat-bowl-smooth","title":"simple flat bowl | smooth","description":"\u003cp\u003edescription:\u003c\/p\u003e\u003cp\u003ea simple, stackable and handy bowl for multiple uses!\u003c\/p\u003e\u003cp\u003ecomes in three sizes:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003esmall\u003c\/li\u003e\n\u003cli\u003emedium\u003c\/li\u003e\n\u003cli\u003elarge\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eprinting:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eI used a small amount of supports for the lower part of the bowl, haven't tried it without them.\u003c\/li\u003e\n\u003cli\u003eIf you want you can use the ironing function for a smoother\/cleaner finish, but that will take a little longer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003epls boost my beginner designing journey!\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesign by nova on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368258240816,"sku":null,"price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_31a8ddc0-743d-44e3-8a4c-ee1ce8bf7aba.png?v=1784028196"},{"product_id":"anycubic-bed-holder-pei-plate","title":"Anycubic BED Holder PEI Plate","description":"\u003cp\u003e\u003cstrong\u003eGood morning,\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eWelcome to my profile, full of models and miniatures :-)\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eI have for you Anycubic BED plate holder PEI Plate \/ textured.\u003c\/h2\u003e\u003ch2\u003eSuitable for example for dripping when cleaning the bed pad with a jar and isopropyl.\u003c\/h2\u003e\u003ch2\u003eCan fit 3 pad.\u003c\/h2\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ePrints very nicely!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIf you are interested in my work, the links are here:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ehttps:\/\/www.instagram.com\/ainon3dprint\/\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ehttps:\/\/www.tiktok.com\/@ainon3dtisk\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ehttps:\/\/www.patreon.com\/Ainon3Dprint\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003ci\u003eThank you for the support, I am happy :-)\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003e\u003ci\u003eHave a nice day\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003eDesign by Ainon3Dprint on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368258306352,"sku":null,"price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_db9a9a11-7210-4b3a-b36e-0656caed6b2a.png?v=1784028202"},{"product_id":"auto-build-plate-changer-for-a1-mini","title":"Auto build-plate changer for A1 mini","description":"\u003ch2\u003eSummary\u003c\/h2\u003e\u003cp\u003eThis is a mod to add Auto build-plate changer to A1 mini.\u003c\/p\u003e\u003cp\u003eThis is an unfinished, unstable beta version, but I release the 3D data, a list of necessary parts, and instructions for making them in order to receive feedback from a wide range of people.\u003c\/p\u003e\u003cp\u003eI am not responsible for any problems caused by the use of the mod.\u003c\/p\u003e\u003cp\u003eThe current version is “beta 4”.(Added on 1\/1\/2025)\u003c\/p\u003e\u003ch2\u003eOperation\u003c\/h2\u003e\u003cfigure class=\"media\"\u003e\u003coembed url=\"https:\/\/youtu.be\/4HwMqpQpar8\"\u003e\u003c\/oembed\u003e\u003c\/figure\u003e\u003ch2\u003eReferences\u003c\/h2\u003e\u003cp\u003eThe idea of using Y-axis and Z-axis and replacing the build plate without adding actuators is based on the public information of the swap mod that is now available on kickstarter.\u003cbr\u003eThe information published on this page is a unstable beta version that is during verification and improvement, so if you want a stable version, please consider purchasing the original swap mod.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/swap-systems.com\/\" rel=\"nofollow noopener\"\u003eSWAP SYSTEMS - (brand of Novibar GmbH)\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eRequired Parts\u003c\/h2\u003e\u003cp\u003eRequired quantity for 3 build plates.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCap bolt M3x25 4set\u003c\/li\u003e\n\u003cli\u003eCap bolt M3x20 4set\u003c\/li\u003e\n\u003cli\u003eCap bolt M3x10 4set\u003c\/li\u003e\n\u003cli\u003eCap bolt M3x5 6set\u003c\/li\u003e\n\u003cli\u003ecountersunk screws M3x10 4set\u003c\/li\u003e\n\u003cli\u003eHexagon nut M3 22set\u003c\/li\u003e\n\u003cli\u003eTeflon tube Φ4x800mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow to assemble\u003c\/h2\u003e\u003cp\u003eAssemble with reference to the photo and the STEP file.\u003c\/p\u003e\u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/a360.co\/3W3yZPb\" rel=\"nofollow noopener\"\u003eView the fusion 3D model in your browser.\u003c\/a\u003e (Added on 1\/1\/2025)\u003c\/p\u003e\u003cp\u003eInsert the filament into the Teflon tube; adjust the length of the filament so that the build plate is removed when Z=max.\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000925870\/design\/2430c7ee-ae3c-4adf-b7a4-59a3e28e73ce.png\"\u003e\u003c\/figure\u003e\u003ch2\u003eChange printer settings\u003c\/h2\u003e\u003cp\u003eAdd a G-code that automatically replaces the build plate after printing.\u003c\/p\u003e\u003cp\u003eAdd the following G-code before the printer finish sound in the Machine end G-code.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #E14747\"\u003e;===== change build-plate\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #E14747\"\u003eG1 Z180 F3000\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #E14747\"\u003eG1 Y186 F6000\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #E14747\"\u003eG1 Z185 F3000\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #E14747\"\u003eG1 Y-4  F6000\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #E14747\"\u003eG1 Y186 F6000\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #E14747\"\u003eG1 Y-4  F6000\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #E14747\"\u003eG1 Y2.5 F6000\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #E14747\"\u003eG1 Y-4  F6000\u003c\/span\u003e\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000925870\/design\/2024-12-30_72a1144e85721.png\"\u003e\u003c\/figure\u003e\u003ch2\u003eUncorrected defect(Added on 1\/1\/2025)\u003c\/h2\u003e\u003cp\u003eHere is the list of issues for which I received feedback.\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePlates may slide out of the stocker due to vibration during printing.\u003cbr\u003ePutting vinyl tape on the surface of the stocker will improve it, but I plan to modify the shape of the stocker.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eDesign by Nii on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368260272432,"sku":null,"price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_10a9b2f0-d95b-4e48-8f71-dd82790a20b4.png?v=1784028552"},{"product_id":"build-plate-rack-x1-p1","title":"Build plate rack - X1\/P1","description":"\u003cp\u003eAs many of us, I also needed some storage solution for my build plates. Sadly most of the current solutions take 10+ hours to print - which is a lot, at least for me. I also have the \u003cstrong\u003eAMS holder riser slider\u003c\/strong\u003e by Sanja3D which has a profile on the side that can be used as a hanger that I wanted to use.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eSo here's my soultion! You can store upto 4 plates for P1\/X1 in it - prints in less than 5 hours.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"image_resized\" style=\"width: 19.83%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000964467\/design\/2025-01-07_04fb3192b4b2e.png\"\u003e  \u003cimg class=\"image_resized\" style=\"width: 34.04%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000964467\/design\/2025-01-07_828d550195836.png\"\u003e  \u003cimg class=\"image_resized\" style=\"width: 22.17%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000964467\/design\/2025-01-07_a6830cd254beb.png\"\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003ci\u003e\u003cstrong\u003eFast to print, easy to assemble! No tools needed, no screws needed, just click together!\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eRemix for 6 plates \u0026gt; \u0026gt; \u0026gt; \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/1261606\"\u003ehttps:\/\/makerworld.com\/en\/models\/1261606\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eRemix for 8 plates \u0026gt; \u0026gt; \u0026gt; \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/1018680\"\u003ehttps:\/\/makerworld.com\/en\/models\/1018680\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThere is a stand and a hanger included on the second plate - also clicks to the top\/bottom part, a bit difficult to remove though, think carefully before installing. Maybe some tolerances still need minor adjustments but it's a good starting point I think.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003ci\u003e\u003cstrong\u003eUpdate 12\/01\/2024:\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003eAdded a print profile with a hanger if you have no riser\/slider just the original glass top lid.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"image_resized\" style=\"width: 30.06%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000964467\/design\/2025-01-12_8280ee0d81343.png\"\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003ci\u003e\u003cstrong\u003eUpdate 01\/21\/2025:\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003eUploaded Fusion 360 files - for those who want to further edit the models…\u003c\/p\u003e\u003cp\u003eUpdated STL files with 1mm taller front\/back, soon will replace print profile as well to include this modification.\u003c\/p\u003e\u003cp\u003eDesign by uniko92 on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368266989872,"sku":null,"price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_a8df1ec8-4aca-4791-b7ae-96f8a1218594.png?v=1784029458"},{"product_id":"pottery-bowl-press-mold-parametric","title":"Pottery Bowl Press\/Mold (parametric)","description":"\u003cp\u003eYou can change the dimensions (tolerances for example) of this model in fusion360 through parameters.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eSince the base and handle are detachable, you can use this model as a press (use plastic or cloth in between the model and your clay for better results), or you can lay the clay onto the model (and form it around it) and use it as a mold.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003ci\u003e\u003cstrong\u003ePrinting Information:\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrint the base upside down (flat side down)\u003c\/li\u003e\n\u003cli\u003ePrint the handle and the connector upright\u003c\/li\u003e\n\u003cli\u003eUse a brim to support the tall pieces by increasing their adherence to the printbed\u003c\/li\u003e\n\u003cli\u003eUse regular supports to support the top of the connector holes while printing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eInspired by BENECREAT Pottery Moulds\u003c\/p\u003e\u003cp\u003eDesign by mosselini1 on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368278393136,"sku":null,"price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_7e0279f3-5080-4426-a9fe-0864a358bcb4.png?v=1784030431"},{"product_id":"30oz-stanley-tumbler-topper-cup-name-plate","title":"30oz Stanley Tumbler Topper | Cup Name Plate","description":"\u003cp\u003eA blank 30oz tumbler topper - Easily edited on Tinkercad to add a name.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eWe sell these in our shop, they are a best seller due to the popularity of Stanley cups. They also fit on some other 30oz tumblers but you'd have to test this. \u003cbr\u003e\u003cbr\u003eOur topper is the perfect fit as not to damage the cup when placed on. Slide through the straw and it simply sits on top.\u003c\/p\u003e\u003cp\u003eDesign by Confetti Dust on MakerWorld (license: BY-ND).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368280195376,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_4d0b6fdb-b594-4ab7-ae2e-203b6d060768.png?v=1784030567"},{"product_id":"weisse-plate","title":"Weiße plate","description":"\u003ch2\u003eWeiße plate \u003c\/h2\u003e\u003ch4\u003eMan kann drauf schreiben usw\u003c\/h4\u003e\u003cp\u003eDesign by 3D druck Profi on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368282259760,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_0efcec5d-2b05-4028-8e22-5b2125940bcc.png?v=1784030978"},{"product_id":"fruit-bowl-1","title":"Fruit Bowl","description":"\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eEvery download helps me create more amazing models for you. If you love this vase (or any of my designs), hit that download button, share your prints, and spread the word!\u003cbr\u003eLet’s build something awesome together! 🚀\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003eThis stunning \u003cstrong\u003efruit bowl\u003c\/strong\u003e features a modern \u003cstrong\u003eparametric lattice design\u003c\/strong\u003e, combining both aesthetics and functionality. Printed in a \u003cstrong\u003evibrant green filament\u003c\/strong\u003e, the bowl showcases an intricate organic structure reminiscent of natural cellular patterns, making it a visually striking piece for any kitchen or dining space.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003elightweight yet sturdy construction\u003c\/strong\u003e provides durability while maintaining an elegant, airy feel.\u003c\/p\u003e\u003cp\u003ePerfect for holding fruits, decorative items, or serving as a centerpiece, this \u003cstrong\u003einnovative bowl\u003c\/strong\u003e is a testament to the creativity and possibilities of \u003cstrong\u003emodern 3D printing\u003c\/strong\u003e!\u003c\/p\u003e\u003cp\u003eDesign by Apo_agg on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368394162480,"sku":null,"price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_0d0a0d19-f44d-4d94-b827-6689d1fb59e9.png?v=1784035454"},{"product_id":"door-house-name-plate","title":"Door \/ House Name Plate","description":"\u003cp\u003eJust designed these sleek and elegant door name plates, optimized for easy printing! They use two colors with AMS for a clean, professional look. You can fully customize the name using the text tool and choose your own fonts to match your style.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eSimple, stylish, and perfect for any door! Hope you like the model—let me know what you think! 😊\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eFilaments used in my print …\u003c\/p\u003e\u003cp\u003eNumakers - Bahama Yellow\u003c\/p\u003e\u003cp\u003eNumakers - Royal Blue\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesign by kpyezdani on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368440561968,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_b1dfac48-2d00-496f-8025-b0cb87260513.png?v=1784036993"},{"product_id":"turkiye-number-plate","title":"Turkiye number plate","description":"\u003cp\u003eTurkiye number plate \u003c\/p\u003e\u003cp\u003eDesign by 3DMeTeVerse on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368660336944,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_b3bab824-8300-4119-be13-cd415041cb89.png?v=1784040411"},{"product_id":"rainbow-unicorn-horse-cute-love-coloring-plate-set","title":"Rainbow Unicorn Horse Cute Love Coloring Plate Set","description":"\u003cfigure class=\"image\" style=\"height: auto\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001273758\/design\/2025-12-23_ac8927669ab7c8.jpeg\"\u003e\u003c\/figure\u003e\u003cfigure class=\"image\" style=\"height: auto\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001273758\/design\/2025-12-23_7eb47798dd9b.jpeg\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2 style=\"text-align: center\"\u003e\n\u003cu\u003eADDONS for the coloring panels:\u003c\/u\u003e\u003cbr\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/1422532-stand-display-for-coloring-panels#profileId-1478138\"\u003e\u003cstrong\u003e\u003cu\u003eStand\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/1422413-hanger-system-for-coloring-panel-keychain-rope#profileId-1477969\"\u003e\u003cstrong\u003e\u003cu\u003eHanger\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/h2\u003e\u003ch2 style=\"text-align: center\"\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/1440374-cake-topper-playdoh-muffin-decor-coloring-panel#profileId-1499136\"\u003e\u003cstrong\u003e\u003cu\u003eCake Topper\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/1442423-rope-hook-system-for-coloring-panels-diy-party#profileId-1501531\"\u003e\u003cstrong\u003e\u003cu\u003eRope Hook\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/h2\u003e\u003cp style=\"text-align: center\"\u003e🛠️ \u003cstrong\u003e\u003cu\u003eScaling Tips for Best Results:\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center\"\u003e\u003cstrong\u003eResizing?\u003c\/strong\u003e Adjust dimensions first, then \u003cstrong\u003edisable uniform scaling\u003c\/strong\u003e and set thickness to \u003cstrong\u003e2.5mm\u003c\/strong\u003e (or thinner for flexibility).\u003c\/p\u003e\u003cp style=\"text-align: center\"\u003e2.5mm is needed to put it in the \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/1422532-stand-display-for-coloring-panels#profileId-1478138\"\u003eSTAND\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp style=\"text-align: center\"\u003e\u003cstrong\u003eBig prints\u003c\/strong\u003e = Great for \u003cstrong\u003ewall art, gifts, or easy coloring for kids!\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center\"\u003e\u003cstrong\u003eSmall prints\u003c\/strong\u003e = Perfect for \u003cstrong\u003efridge magnets, fine motor skill practice, or a fun challenge for adults!\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e\u003cp style=\"text-align: center\"\u003e\u003cimg class=\"image_resized\" style=\"height: auto; width: 267.469px\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001273758\/design\/2025-05-16_78720b0828cf3.png\"\u003e\u003cimg class=\"image_resized\" style=\"height: auto; width: 267.552px\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001273758\/design\/2025-05-16_748fc0873632e.png\"\u003e\u003cimg class=\"image_resized\" style=\"height: auto; width: 266.656px\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001273758\/design\/2025-05-21_81e345120dee88.png\"\u003e\u003cimg class=\"image_resized\" style=\"height: auto; width: 208.594px\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001273758\/design\/2025-05-16_04c1655210e34.png\"\u003e  \u003cimg class=\"image_resized\" style=\"height: auto; width: 208.594px\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001273758\/design\/2025-05-16_982fca459efd88.png\"\u003e  \u003cimg class=\"image_resized\" style=\"height: auto; width: 207.948px\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001273758\/design\/2025-05-22_d13e277eb52878.png\"\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp style=\"text-align: center\"\u003e🚀 \u003cstrong\u003ePrint, Color, Display—Your Adventure Awaits!\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center\"\u003e \u003c\/p\u003e\u003cp style=\"text-align: center\"\u003eU can find more in my \u003cstrong\u003e\u003cu\u003efull\u003c\/u\u003e\u003c\/strong\u003e \u003cstrong\u003ecollection\u003c\/strong\u003e here: \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/collections\/5629404-coloring\"\u003ehttps:\/\/makerworld.com\/en\/collections\/5629404-coloring\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eDesign by Merilno3D on MakerWorld (license: BY-ND).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368664826160,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_ecf94269-a30f-4c82-ab6f-22b866ddb934.png?v=1784040764"}],"url":"https:\/\/mymadmanlab.com\/collections\/kitchen-and-dining.oembed?page=2","provider":"Mymadmanlab.com","version":"1.0","type":"link"}