{"product_id":"12-pot-hydroponic-tower-with-supports","title":"12 pot Hydroponic tower with supports","description":"\u003cp\u003eThis is a Remix of the \u003cstrong\u003eModular Hydroponic Tower Garden by \u003c\/strong\u003e\u003ca target=\"_blank\" href=\"https:\/\/makerworld.com\/en\/@christiansotelo\" rel=\"nofollow noopener\"\u003e\u003cstrong\u003e@\u003c\/strong\u003echristiansotelo. \u003c\/a\u003eI changed the infill to 10% made the infill the new fast cross hatch and using a .6mm nozzel with a .3 layer height.\u003c\/p\u003e\u003cp\u003eIn this version i have included a few attachments i have found else ware. I have included the\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAeroponic Tower Shells by\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.thingiverse.com\/LucidOndine\" rel=\"nofollow noopener\"\u003e\u003cstrong\u003ehttps:\/\/www.thingiverse.com\/LucidOndine\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.thingiverse.com\/thing:4531175\" rel=\"nofollow noopener\"\u003e\u003cstrong\u003ehttps:\/\/www.thingiverse.com\/thing:4531175\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eand\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003e\u003cstrong\u003e5 Gallon Bucket Lid Adapter Plates\u003c\/strong\u003e\u003c\/h2\u003e\u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.thingiverse.com\/Trevorhirschi\" rel=\"nofollow noopener\"\u003e\u003cstrong\u003ehttps:\/\/www.thingiverse.com\/Trevorhirschi\u003c\/strong\u003e\u003c\/a\u003e \u003ca target=\"_blank\" href=\"https:\/\/www.thingiverse.com\/thing:4395675\" rel=\"nofollow noopener\"\u003ehttps:\/\/www.thingiverse.com\/thing:4395675\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003ePost-Printing\u003c\/strong\u003e\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAssembly\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThere are two basic pieces which need to be printed several times per shell:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e4x Arms\u003c\/li\u003e\n\u003cli\u003e6x Rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e\u003cstrong\u003eAdditional Hardware\u003c\/strong\u003e\u003c\/h2\u003e\u003cp\u003eArm Attachment:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e4x M3x16 Screws (Stainless Steel)\u003c\/li\u003e\n\u003cli\u003e4x M3 Washers (Stainless Steel)\u003c\/li\u003e\n\u003cli\u003e4x M3 Nylock Hex Nuts (Stainless Steel)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRing Assembly:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e20x M3x12 Screws (Stainless Steel)\u003c\/li\u003e\n\u003cli\u003e20x M3 Nylock Hex Nuts (Stainless Steel)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h2\u003e\u003cp\u003eAttach each arm to the grow module; insert the m3x16 screws through the washer (from the bottom) and into a nylock hex nut on top.\u003c\/p\u003e\u003cp\u003eAssemble 4 sets of 2 ring components together using 2x M3x12 and 2x Nylock Hex nuts per pair. Attach each pair together onto the arm components; for each arm, use 2x M3x12 screws through the arm, then the thicker ring component, then through the thinner strip of an additional arm. Secure both screws with 2x Nylock hex nuts.\u003c\/p\u003e\u003cp\u003eThe holes for the ring may not line up with the holes for the arm. i just took a 3 mm drill bit and drilled threw the ring to attach to the arm. \u003c\/p\u003e\u003cp\u003eDesign by Chef3DPrints on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67414838018352,"sku":null,"price":322.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_5d54f6eb-1fe7-499a-aa02-ff1eb5677241.png?v=1785397903","url":"https:\/\/mymadmanlab.com\/products\/12-pot-hydroponic-tower-with-supports","provider":"Mymadmanlab.com","version":"1.0","type":"link"}