{"product_id":"2023-porsche-badge","title":"2023 Porsche Badge","description":"\u003cp\u003e\u003cstrong\u003e2023 Porsche Badge \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e**Update\u003c\/strong\u003e**\u003c\/p\u003e\u003cp\u003eI've added a PLA Silk+ Gold profile as I think it came out much better than the standard gold or yellow\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eI dropped the colours from 4 to 3, you lose the eye in the horse, and the overall finish is much cleaner.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eInstructions are in the print profile which are slightly different to the standard PLA print.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u0026lt;\u0026lt;\u0026lt;\u0026lt;SILK+ PLA Settings for profile\u0026gt;\u0026gt;\u0026gt;\u0026gt; \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eSet the outer wall layer speed to 30mm\/s\u003c\/p\u003e\u003cp\u003eSet the top surface to 30mm\/s\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eOptionally tune your Silk Gold to a temp of 230c, and set the flow rate from 12mm\/s to 8mm\/s, it adds some print time, but I thought the result was worth it\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u0026lt;\u0026lt;\u0026lt;\u0026lt; End SILK+ PLA Settings for profile\u0026gt;\u0026gt;\u0026gt;\u0026gt; \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cbr\u003eA modern Porsche crest display plaque based on the updated 2023-style badge, with the cleaner gold shield, black Porsche lettering, Stuttgart horse, red honeycomb sections, and raised crest details brought into a printed garage-piece format. It feels more like a small automotive emblem than a normal wall tile, especially with the gold sitting as the final top layer.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe smaller version is included as a compact option, but the 0.4mm nozzle does lose some fine detail, mainly inside the Stuttgart horse. The gold top layer can be swapped to suit the look you want: silk gold, matte gold, bronze, champagne, metallic gold, or even yellow if that is what you have loaded.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePrint Settings:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e100% infill\u003c\/li\u003e\n\u003cli\u003eSparse Infill Pattern: Rectilinear\u003c\/li\u003e\n\u003cli\u003e0.08mm layer height\u003c\/li\u003e\n\u003cli\u003e0.16mm initial layer\u003c\/li\u003e\n\u003cli\u003eLarge profile model size: 114.75x150mm\u003c\/li\u003e\n\u003cli\u003eLarge \u003cstrong\u003eSilk\u003c\/strong\u003e profile model size: 114.75x150mm\u003c\/li\u003e\n\u003cli\u003eSmall profile model size: 57.37x75mm\u003c\/li\u003e\n\u003cli\u003eOptional: You can use a height range modifier up to 0.48mm to print the solid base layers at a higher layer height, such as 0.24mm.\u003c\/li\u003e\n\u003cli\u003eThe small version may lose some fine internal detail with a 0.4mm nozzle, mostly around the Stuttgart horse.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFilaments used:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e#000000 PLA BambuLab Basic Black, TD: 0.6\u003c\/li\u003e\n\u003cli\u003e#c00d1e PLA BambuLab Basic Red, TD: 4\u003c\/li\u003e\n\u003cli\u003e#e4bd68 PLA BambuLab Gold, TD: 3.4\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis print uses 4 unique filaments.\u003c\/p\u003e\u003cp\u003eThe gold top layer can be swapped for another gold filament, silk gold, matte gold, metallic gold, bronze-style filament, champagne gold, or yellow if needed.\u003c\/p\u003e\u003cp\u003eSimilar filament colours may be used, including close Bambu Lab or equivalent alternatives, but results may vary depending on filament brand, colour, transparency, and calibration.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSwap Instructions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStart with Black\u003c\/li\u003e\n\u003cli\u003eAt layer #10 (0.88mm) swap to Red \u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAt layer #17 (1.44mm) swap to Gold for the rest.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDesign by Thadius on MakerWorld (license: BY-ND).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67391717245232,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_ce46922c-d06f-4cbc-ad5d-7c32894873b4.png?v=1784755530","url":"https:\/\/mymadmanlab.com\/products\/2023-porsche-badge","provider":"Mymadmanlab.com","version":"1.0","type":"link"}