{"product_id":"90-degree-bracket-for-2-nema-17-steppers","title":"90 Degree Bracket for 2 Nema 17 steppers","description":"\u003cp\u003eA simple 90 degree bracket for mounting 2 nema 17 stepper motors together.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eAdditional hardware requirements:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e4x m3x8 screw\u003c\/li\u003e\n\u003cli\u003e4x m3 washer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eI created this for a laser toy for my cat. The intention was mounting it on a shelf and automatically moving the laser on the floor, while I'm not home.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe model is printed on it's side for added strength.\u003c\/p\u003e\u003cp\u003eSupports are painted manually, because auto support wanted to waste filament on the 3mm holes.\u003c\/p\u003e\u003cp\u003eAfter printing it I did have to slightly clean the 3mm holes, because I found them a bit tight. They still work just the m3 screws bit into the plastic.\u003c\/p\u003e\u003cp\u003eThe bottom hole also has supports inside, which are a bit hard to remove, but nothing a pair of tweezers can't handle.\u003c\/p\u003e\u003cp\u003eThe bottom stepper does not currently have a set screw hole, because I found that adding a layer of tape to the shaft of the stepper was plenty enough for testing. The final version might have one depending on how I mount it.\u003cbr\u003e\u003cbr\u003eI printed this model in PLA and it seems strong enough from my testing.\u003c\/p\u003e\u003cp\u003eDesign by NotMikee__ on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67440169615664,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_c52e2cfd-f279-4eb0-bd8b-673957d63231.png?v=1785766271","url":"https:\/\/mymadmanlab.com\/products\/90-degree-bracket-for-2-nema-17-steppers","provider":"Mymadmanlab.com","version":"1.0","type":"link"}