{"product_id":"a1-build-plate-aligner","title":"A1 Build Plate Aligner","description":"\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003c\/boostme\u003e\u003cp\u003eI am having issue with put my build plate on my A1.\u003c\/p\u003e\u003cp\u003eThe original guide does help aling the build plate, but I feel like those two on the side does not help that well, since it is so low to the printer bed. So I made this build plate aligner deisgn to help easier put you build plate down.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003ci\u003e\u003cstrong\u003eDue to the nozzle prime brush located on the left, and nozzle have travel a lot of the left, I don't think it worth the risk to put anything on the left.\u003c\/strong\u003e\u003c\/i\u003e Plus, this one on the right side is already good enough to help you locate the build build.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eIt cost very little filament, \u003ci\u003e\u003cstrong\u003eless than 5g\u003c\/strong\u003e\u003c\/i\u003e. Around \u003ci\u003e\u003cstrong\u003e19m printing time\u003c\/strong\u003e\u003c\/i\u003e. Suggests print at least with \u003ci\u003e\u003cstrong\u003ePETG, or ABS\u003c\/strong\u003e\u003c\/i\u003e.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003e\u003cspan style=\"color: #E14747\"\u003eATTENTION! If you are firmware version 01.01.50.24 or above, do not use other people's printing profile, model is not longer compare after firmware update. \u003c\/span\u003e\u003c\/h2\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eUpdate 1\/27\/2024: New model updated, name “for 01.01.50.24 firmware”. \u003c\/h2\u003e\u003ch3\u003eNew firmware version: 01.01.50.24(beta) will cause issue. I have found nozzle clumping detection cause the issue. It is automatically enabled after firmware update. But no option to disable it currently. More information from Bambu Wiki: \u003c\/h3\u003e\u003ch3\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/wiki.bambulab.com\/en\/a1-mini\/manual\/nozzle-warp-detection\"\u003ehttps:\/\/wiki.bambulab.com\/en\/a1-mini\/manual\/nozzle-warp-detection\u003c\/a\u003e \u003c\/h3\u003e\u003cp\u003e \u003c\/p\u003e\u003ch3\u003eIssue description: \u003c\/h3\u003e\u003cp\u003eAfter update firmware 0.1.01.50.24. Print stops randomly in the middle and error note shows: \u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000124090\/design\/2024-01-27_271f7f17e33c4.png\"\u003e\u003c\/figure\u003e\u003cp\u003e Nozzle will park on the aliger area and cuase issue. \u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000124090\/design\/2024-01-27_b0eecdf4e5003.png\"\u003e\u003c\/figure\u003e\u003cp\u003e According to BBL Wiki: \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\"1. After printing all the walls of the first object on the third layer of this plate, the tool head will move to the position of the purge wiper for the first detection.\u003c\/strong\u003e\u003cspan style=\"background-color: rgb(255,255,255); color: rgb(66,66,66); font-size: 16px\"\u003e The specific coordinates of the nozzle during detection:  A1 mini (X-6, Y 170, Z-1); A1 (X 261, Y 250, Z-1). The detection process is shown in the following figure.\u003c\/span\u003e\u003cstrong\u003e \" \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eInstall guide:\u003c\/h2\u003e\u003cp\u003eAlign from the back, push the aligner pin into the bolt hole under the build plate.\u003c\/p\u003e\u003cp\u003eConfrim top part is all the way in.\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000124090\/design\/2024-01-04_7cd7e48eb7b47.gif\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eMany revisions was made and many tests was done to confirm it not only works but also get good fit and finish:\u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 55%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000124090\/design\/2024-01-05_2c006911bca8.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eMaterial:\u003c\/h2\u003e\u003cp\u003eHighly suggest to print with ABS or better \u003ci\u003e\u003cstrong\u003eheat resistant material\u003c\/strong\u003e\u003c\/i\u003e. PETG Will works. PLA is not recommaned.\u003c\/p\u003e\u003cp\u003eI also made cut line design on alginer, those cut slots should help guiding the direction when thermal expansion and retraction happen. Which it should bond on the printer bed more if thermal deformation occurs.\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000124090\/design\/2024-01-04_ec38222ff07b3.png\"\u003e\u003c\/figure\u003e\u003cp\u003eDesign by SavageLau on MakerWorld (license: BY-ND).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67366877987120,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_a5180bf9-9d22-4c37-a287-7f99e53c6c3b.png?v=1784005532","url":"https:\/\/mymadmanlab.com\/products\/a1-build-plate-aligner","provider":"Mymadmanlab.com","version":"1.0","type":"link"}