{"product_id":"aonijie-hydration-trocknungsstander-drying-stand","title":"AONIJIE Hydration Trocknungsständer \/ Drying Stand","description":"\u003cp\u003eMein Sohn brauchte einen Ständer um seine Trinkbeutel zu trocknen. Deswegen wird hier eine Höhe von rund 30 cm gebraucht.\u003c\/p\u003e\u003cp\u003eAm Besten in  PETG drucken.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003e[DE] AONIJIE Trinkblasen \u0026amp; Softflask Trocknungsständer\u003c\/h2\u003e\u003cp\u003eEin extrem praktischer, aus einem Stück gedruckter Trocknungsständer, der speziell für Trailrunner, Wanderer und Radfahrer entwickelt wurde. Er löst das bekannte Problem, dass die Innenwände von Trinksystemen nach dem Reinigen zusammenkleben, Feuchtigkeit blockiert wird und sich Schimmel oder unangenehme Gerüche bilden.\u003c\/p\u003e\u003cp\u003eDer Ständer verfügt über eine hohe, breite Mittelsäule, um eine \u003cstrong\u003egroße Trinkblase (1,5L - 3L)\u003c\/strong\u003e komplett geöffnet und aufrecht zu halten, sodass die Luft perfekt zirkulieren kann. Zwei spezialisierte Seitenzapfen halten \u003cstrong\u003eSoftflasks (250ml - 500ml)\u003c\/strong\u003e kopfüber, damit das Restwasser sauber ablaufen kann.\u003c\/p\u003e\u003cp\u003e⚠️ \u003cstrong\u003eWICHTIGER HINWEIS ZUR GRÖSSE:\u003c\/strong\u003e Das Modell besitzt eine Gesamthöhe von \u003cstrong\u003e30 cm (300 mm)\u003c\/strong\u003e, damit selbst extra lange 3-Liter-Trinkblasen den Boden beim Trocknen nicht berühren. Aufgrund dieser enormen Z-Höhe wird zwingend ein 3D-Drucker mit großem Bauraum (mindestens 300 mm Bauhöhe) benötigt, um den Ständer in einem Stück zu drucken!\u003c\/p\u003e\u003ch3\u003eVorteile\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimale Luftzirkulation:\u003c\/strong\u003e Hält die Trinkblase weit geöffnet für maximale Trocknungsgeschwindigkeit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-in-1 Ordnungssystem:\u003c\/strong\u003e Trocknet gleichzeitig 1x große Trinkblase, 2x Softflasks und den Trinkschlauch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKippsichere Basis:\u003c\/strong\u003e Das stabile Kreuzfuß-Design hält das Gewicht des nassen Equipments problemlos, ohne zu wackeln.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zu 100% für den Druck in \u003cstrong\u003ePETG\u003c\/strong\u003e ausgelegt, um dem ständigen Kontakt mit Feuchtigkeit dauerhaft standzuhalten.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEmpfohlene Druckeinstellungen\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e \u003cstrong\u003ePETG\u003c\/strong\u003e (Wegen der permanenten Nässe dringend empfohlen).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWandlinien (Perimeter):\u003c\/strong\u003e 3 - 4 (Macht die vertikalen Säulen absolut stabil und steif).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 15% - 20% (Gyroid).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStützstruktur (Support):\u003c\/strong\u003e Nein oder Baum-Support (Organic), je nachdem, wie gut dein Drucker die Brücken der unteren Querstreben schafft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003e[EN] AONIJIE Hydration Bladder \u0026amp; Softflask Drying Stand\u003c\/h2\u003e\u003cp\u003eThis is a highly practical, single-piece drying rack specifically engineered for trail runners, hikers, and cyclists. It solves the common problem of sticky inner walls, trapped moisture, and mold growth in hydration systems after cleaning.\u003c\/p\u003e\u003cp\u003eThe stand features a tall, wide center pillar designed to keep a \u003cstrong\u003elarge hydration bladder (1.5L - 3L)\u003c\/strong\u003e fully expanded and upright for optimal airflow. Two specialized side pegs hold \u003cstrong\u003esoftflasks (250ml - 500ml)\u003c\/strong\u003e upside down, allowing water to drain perfectly.\u003c\/p\u003e\u003cp\u003e⚠️ \u003cstrong\u003eIMPORTANT SIZE NOTE:\u003c\/strong\u003e This model has a total height of \u003cstrong\u003e30 cm (300 mm)\u003c\/strong\u003e to ensure even extra-long bladders don't touch the ground. Because of this massive Z-axis requirement, you will need a large-volume 3D printer with at least 300 mm build height to print this file in one piece!\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimal Airflow:\u003c\/strong\u003e Holds the bladder wide open so it dries rapidly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-in-1 Organization:\u003c\/strong\u003e Dries 1x large bladder, 2x softflasks, and the hydration hose simultaneously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRock Solid Base:\u003c\/strong\u003e Stable cross-foot design that easily holds the weight of wet gear without tipping over.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 100% optimized for \u003cstrong\u003ePETG\u003c\/strong\u003e to withstand constant water contact and moisture.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e \u003cstrong\u003ePETG\u003c\/strong\u003e (Highly recommended due to moisture).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall Loops (Perimeter):\u003c\/strong\u003e 3 - 4 (Ensures the vertical pillars are stiff and strong).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfill:\u003c\/strong\u003e 15% - 20% (Gyroid).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports:\u003c\/strong\u003e None or Organic (Tree) depending on your printer's bridging capabilities for the lower cross-braces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e \u003c\/h2\u003e\u003cp\u003eDesign by OCTO-Build on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67372685132080,"sku":null,"price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_272ee9ff-e3ab-4d00-9eb2-6eeecef8b549.png?v=1784131439","url":"https:\/\/mymadmanlab.com\/products\/aonijie-hydration-trocknungsstander-drying-stand","provider":"Mymadmanlab.com","version":"1.0","type":"link"}