{"product_id":"bambu-a1-mini-build-plates-holder-with-button-ng","title":"Bambu A1 Mini Build Plates holder with button NG","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000978238\/design\/2025-01-05_7d635d731be99.gif\"\u003e\u003c\/figure\u003e\u003ch3\u003eNew NG Version A1 Mini\u003c\/h3\u003e\u003cp\u003eHi, after the \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/my\/models\/654755\"\u003esuccess of the build plate holder\u003c\/a\u003e I decided to incorporate all the comments and a new version was created, which I call NG (new generation). I printed many prototypes in which I tested different configurations and I present the result to you.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cfigure class=\"image image_resized\" style=\"width: 43.5%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000978238\/design\/2025-01-05_dc0fd947b79758.jpg\"\u003e\u003c\/figure\u003e\u003c\/li\u003e\n\u003cli\u003eThe biggest change is the change in the shape and location of the buttons. Now you can choose whether the button should protrude and fit into the holder when pressed. The second option is a shorter button, it does not protrude, but is pressed into the inside of the holder. In general the new buttons are a little shorter and stick out from the body. You can find the shortened buttons in a separate profile.\u003c\/li\u003e\n\u003cli\u003eI worked on better tolerances to make printing and assembly easier and without the use of sandpaper.\u003c\/li\u003e\n\u003cli\u003eAdded Brim by default\u003c\/li\u003e\n\u003cli\u003eBody and arm parts are marked (UP \/ This side UP) for better orientation and easy assembly\u003c\/li\u003e\n\u003cli\u003eAll other benefits and functionality have been retained.\u003c\/li\u003e\n\u003cli\u003eColor number in the buttons by default (but can be printed faster in one color)\u003c\/li\u003e\n\u003cli\u003eThe buttons allow you to place two holders close together without collision.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000978238\/design\/2025-01-05_43de389c6756a8.gif\"\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000978238\/design\/2025-01-05_7af7054664244.gif\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003ch3\u003eIntroduction\u003c\/h3\u003e\u003cp\u003eI have many build plates for both Prusa and Bambu printers and very limited space for storage. So I decided to create plates holder with eject button for easy insertion and removal.\u003c\/p\u003e\u003cp\u003eInserting and removing build plates goes very smoothly. There is no danger of the printing surface getting dirty from greasy fingers :-)\u003c\/p\u003e\u003cp\u003eBy pressing the button, the build plate ejects approximately 3 cm. By inserting the build plate, the button will pop out easily.\u003c\/p\u003e\u003cp\u003eUse 4 pcs of 3-4mm in diameter countersink head screws to fix the holder.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVertical placement\/sticking to the side of the printer also works great.\u003c\/strong\u003e\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000978238\/design\/2025-01-05_9048d881b202c.gif\"\u003e\u003c\/figure\u003e\u003ch3\u003eYou can choose from several options from my profile:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/954070#profileId-923719\"\u003efor Bambu X1\/P1\/A1 build plates\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003efor Bambu A1 Mini\u003c\/li\u003e\n\u003cli\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/1030257#profileId-1012949\"\u003efor Prusa Mk3\/Mk4 family\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003efor Ender 3 family (Coming Soon)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003efor 1 build plate  (Coming Soon)\u003c\/li\u003e\n\u003cli\u003efor 2 build plates\u003c\/li\u003e\n\u003cli\u003efor 4 build plates\u003c\/li\u003e\n\u003cli\u003efor 6 build plates\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eButtons:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWith normal and shorter eject buttons (You can find the shorter buttons in a separate profile.)\u003c\/li\u003e\n\u003cli\u003eWithout eject buttons body (Coming Soon)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000978238\/design\/2025-01-05_796ae49ec6da18.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003ch3\u003eAssembly:\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003ePrint Holder body (Left+Right), buttons and arms of selected version\u003c\/li\u003e\n\u003cli\u003eInsert button to the holder. Slide in \/ out several times to clean slot and button bar from printing imperfections\u003c\/li\u003e\n\u003cli\u003eRotate Holder body and arm to see UP \/ This side UP\u003c\/li\u003e\n\u003cli\u003ePush the arm into the holder firmly. Align the teeth according to the picture. UP text on arm helps you with orientation\u003c\/li\u003e\n\u003cli\u003eMount holder using 3mm\/4mm screws. Strong double-sided mounting tape based on foam\/gel is also OK\u003c\/li\u003e\n\u003c\/ol\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000978238\/design\/2025-01-05_512d1d228bfa38.gif\"\u003e\u003cfigcaption\u003eInsert button to the holder. Slide in \/ out several times to clean slot and button bar from printing imperfections\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000978238\/design\/2025-01-05_01741722a8106.gif\"\u003e\u003cfigcaption\u003ePush the arm into the holder firmly. Align the teeth according to the picture.\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000978238\/design\/2025-01-05_b026f2bba73648.gif\"\u003e\u003cfigcaption\u003eIf you need to remove the arm, simply extend the slot and remove it.\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000978238\/design\/2025-01-05_a52cdc068d8278.jpg\"\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000978238\/design\/2025-01-05_574b44ba9f62d.jpg\"\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000978238\/design\/2025-01-05_e23a31af5efbc8.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003e\u003ci\u003eNote: The images and videos may show different versions of the X1 \/ A1Mini \/ Prusa mount. This is to illustrate the functionality.\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003e\u003cstrong\u003eHow to print\u003c\/strong\u003e\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eClean with build plate with soap \/ IPA \/ use 3Dlac to prevent the model from lifting from the base during printing.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe risk of the model lifting is when printing on a opened printer, such as A1 and A1 Mini, because the model is long and is from corner to corner of the base. In addition, A1 and A1 Mini is a type of printer where the base moves, which creates drafts and increases the risk of the model lifting. The risk of lifting is further increased if the room where you are printing is drafty - just have an open window and you're already in trouble.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ePLA is OK\u003c\/p\u003e\u003cp\u003eLayer: 0.2\u003c\/p\u003e\u003cp\u003eWalls: 2\u003c\/p\u003e\u003cp\u003eInfill: 15%\u003c\/p\u003e\u003cp\u003eUse BRIM\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOptional part - Spacer\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo makers told me that sometimes the back arm falls out when inserting the plate.\u003c\/p\u003e\u003cp\u003eThe most common reason why this happens is that some printing materials like PETG are more flexible than PLA and the individual floors of the holder will stretch slightly. If this happens to you, use a simple adjustment - \u003cstrong\u003e6xSpacer\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eI created this simple fix. Just print it on a 3D printer and snap it into the gap between the arms at the cutout for easier insertion. The model weighs 3 grams and contains 6 pieces (for up to 6 plates holder).\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000978238\/design\/2025-01-16_f313ef42de40f.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003eDesign by Frantisek23 on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67438448378160,"sku":null,"price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0.publish_2ac11dea-bbf2-480c-ad34-babc0431a08d.jpg?v=1785746435","url":"https:\/\/mymadmanlab.com\/products\/bambu-a1-mini-build-plates-holder-with-button-ng","provider":"Mymadmanlab.com","version":"1.0","type":"link"}