Bambu studio profile for A1 mini pen holder

This is a printer, filament and slicing profile combo to allow the best usage of the A1/mini pen holder

Change extrusion line thickness based on the one of your pen

You can also use small Maker's supply 2x4 magnets to hold the paper sheet well

Disclaimer: This uses modified gcode, even if it has been mostly tested I advise you to start a small test print and stand by your printer the first time, be also very careful with magnet placement to make sure your printhead doesn't ram into it

There is also a ~45mm offset down the Y axis, so keep that in mind

As previously said a number of time in the comment, pease download from the CAD/STL section so that makerworld doesn't removed the custom Gcode,

note that this profile is intended for the A1 mini, while it technically could work on the A1, I don't take any responsability for any failure you might encounter.

For image vectorization I recommend using this website https://picsvg.com/ or just inkscape

NOTE: for the path to only be traced once, you should scale the model a Z height of just above 0.1 (like 0.11).

Also dear makerworld mods: as for the “Please detail how you remixed the original model. Otherwise, our moderators will remove your model.”, please don't as this expands undirectly on the creator product and I was directly allowed by them to post the profile as a remix

Design by leonllrmc on MakerWorld (license: BY).