{"product_id":"benchy-best-quality-profile-bambu-petg-translucent","title":"Benchy|Best Quality Profile|Bambu PETG Translucent","description":"\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eIf this profile saved you time or improved your print quality, a Boost 🚀 would mean a lot.\u003cbr\u003eI dedicate many hours researching, testing, and refining these settings so others can benefit from reliable results.\u003cbr\u003eThank you for supporting the project and helping me continue creating content for the community 🙌\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003e\u003cstrong\u003e📦 Description Template (Refined Version)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis model is a remix of the original \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.thingiverse.com\/thing:763622\"\u003e3D Benchy\u003c\/a\u003e by CreativeTools, created to evaluate and compare filament performance before and after full calibration.\u003c\/p\u003e\u003cp\u003eThe goal is to analyze how planar surfaces, overhangs, bridges, arches and fine details improve once a filament is properly tuned. As you can see below i have tested a bunch of diferent filaments.\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002424270\/design\/a75eb117e6a769b0.png\"\u003e\u003c\/figure\u003e\u003cp\u003eThis profile reflects my complete calibration workflow using a Bambu Lab P1P (now upgraded to a P1S) with a 0.4mm nozzle.\u003c\/p\u003e\u003ch2\u003e⚙️ Note About Bambu PETG Translucent\u003c\/h2\u003e\u003cfigure class=\"image image_resized\" style=\"width: 43.91%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002424270\/design\/941e3936d5b1c86e.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003eFor this specific model, the filament used is \u003cstrong\u003eBambu Lab PETG Translucent\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eBambu Lab filaments are extremely well calibrated from factory, and their official material profiles inside Bambu Studio are already highly optimized for reliability, extrusion consistency, and stable flow behavior.\u003c\/p\u003e\u003cp\u003eBecause of that, I did not perform additional filament calibration for this PETG Translucent.\u003c\/p\u003e\u003cp\u003eInstead, I used the official Bambu PETG Translucent material profile and combined it with my personal Benchy print settings — the same print strategy I use across all my Benchy tests, which I consider my highest quality configuration.\u003c\/p\u003e\u003cp\u003eThis combination highlights how well PETG Translucent performs straight out of the box, especially in terms of:\u003c\/p\u003e\u003cp\u003e• Layer consistency\u003cbr\u003e• Smooth surface finish\u003cbr\u003e• Controlled light diffusion\u003cbr\u003e• Clean overhang performance\u003c\/p\u003e\u003cp\u003eTranslucent materials are more sensitive to extrusion inconsistencies, so maintaining stable flow and uniform layer deposition is essential to achieve a clean and visually pleasing result.\u003c\/p\u003e\u003ch2\u003e🔬 About Calibration\u003c\/h2\u003e\u003cp\u003eFor Bambu filaments, I generally trust the official profiles, as they are already very refined and extensively tested.\u003c\/p\u003e\u003cp\u003eHowever, if you are using third-party filaments, I strongly recommend following the calibration workflow described above.\u003c\/p\u003e\u003cp\u003eI invested significant time researching and testing different calibration methods to determine:\u003c\/p\u003e\u003cp\u003e• What is truly necessary\u003cbr\u003e• What improves print quality\u003cbr\u003e• What is not worth spending time on\u003c\/p\u003e\u003cp\u003eThe workflow described in this profile is efficient, practical and produces very consistent results.\u003c\/p\u003e\u003cp\u003eIf you are using other brands, I encourage you to check the calibrated profiles available on my page and follow the same methodology — it works extremely well.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e🛠 My Calibration Workflow\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1️⃣ Manufacturer Baseline Review\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eI always begin by checking the manufacturer's website and packaging for recommended:\u003c\/p\u003e\u003cul style=\"list-style-type: disc\"\u003e\n\u003cli\u003ePrint temperature\u003c\/li\u003e\n\u003cli\u003eBed temperature\u003c\/li\u003e\n\u003cli\u003eCooling settings\u003c\/li\u003e\n\u003cli\u003eSpeed recommendations\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e(Manufacturer websites are usually the most up-to-date and reliable source.)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e2️⃣ Initial Benchy Print\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eI print this Benchy using the base profile provided here to establish a performance reference.\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002424270\/design\/1d75c2c4cf3e106f.png\"\u003e\u003c\/figure\u003e\u003cp\u003eFrom the photos you can visually see clear under extrusion in the \u003cstrong\u003eBefore\u003c\/strong\u003e and it is also possible to see the smooth surface of the rear deck of the boat in the \u003cstrong\u003eAfter\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3️⃣ Temperature Tower Test 🌡\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eI print a temperature tower specific to the material.\u003c\/p\u003e\u003cp\u003eFrom this test, I select the temperature that provides the best balance between overhangs, stringiness and surface quality.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 39.01%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002424270\/design\/fb7a30ddc535db1b.jpeg\"\u003e\u003c\/figure\u003e\u003cp\u003e\u003cstrong\u003e4️⃣ Maximum Volumetric Flow Test 🚀\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFor high-speed materials (for example PETG Rapid), I run a maximum volumetric flow test and adjust the value accordingly.\u003c\/p\u003e\u003cp\u003e⚠ If the manufacturer does NOT advertise high-speed capability, I recommend keeping the default value — even if tests suggest an increase of +5–6 mm³\/s.\u003c\/p\u003e\u003cp\u003eThat margin usually represents the safety buffer designed to ensure consistent and reliable printing.\u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 39.16%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002424270\/design\/ebc6cc685c2a678a.jpeg\"\u003e\u003c\/figure\u003e\u003cp\u003e\u003cstrong\u003e5️⃣ Flow Dynamics Calibration ⚙\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUsing the built-in calibration tools in Bambu Studio, I fine-tune flow dynamics to improve extrusion consistency and corner behavior.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 39.69%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002424270\/design\/673083e526d74ff8.jpeg\"\u003e\u003c\/figure\u003e\u003cp\u003e\u003cstrong\u003e6️⃣ Flow Rate Calibration 🎯\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFinally, I perform a flow rate calibration using the Bambu Studio calibration menu to achieve optimal extrusion accuracy.\u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 39.02%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002424270\/design\/54b493a128a23a23.jpeg\"\u003e\u003c\/figure\u003e\u003cp\u003eBambu provides an excellent guide explaining how to properly analyze calibration results here:\u003c\/p\u003e\u003cp\u003e👉\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/wiki.bambulab.com\/en\/bambu-studio\/Calibration\"\u003e[Bambu official calibration guide link]\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e📸 Additional Calibrated Profiles\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn my profile, you can find other calibrated Benchy models where I share:\u003c\/p\u003e\u003cp\u003e• Tested print settings\u003c\/p\u003e\u003cp\u003e    • Optimized temperatures\u003c\/p\u003e\u003cp\u003e    • Flow adjustments\u003c\/p\u003e\u003cp\u003e    • Volumetric limits\u003c\/p\u003e\u003cp\u003e• Real print photos\u003c\/p\u003e\u003cp\u003e• Final recommendations for that filament\u003c\/p\u003e\u003cp\u003eAll profiles are tested and calibrated on my machine. They are optimized for Bambu Lab printers, and in many cases may also work well on other printers with similar hardware and setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e🙌 Support \u0026amp; Feedback\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf you find this profile useful, please consider leaving a like 👍\u003c\/p\u003e\u003cp\u003eAnd if possible, a Boost 🚀 — it helps me continue developing high-quality calibrated profiles and testing new materials to share with the community.\u003c\/p\u003e\u003cp\u003eThank you for your support!\u003c\/p\u003e\u003cp\u003eDesign by Bruno Pereira on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67391487213872,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_6a47fbcf-62ce-4792-a6b8-7997fb047416.png?v=1784752250","url":"https:\/\/mymadmanlab.com\/products\/benchy-best-quality-profile-bambu-petg-translucent","provider":"Mymadmanlab.com","version":"1.0","type":"link"}