{"product_id":"benchy-elegoo-pla-calibrated-filament-settings","title":"Benchy – Elegoo PLA | Calibrated Filament Settings","description":"\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eIf this profile saved you time or improved your print quality, a Boost 🚀 would mean a lot.\u003cbr\u003eI dedicate many hours researching, testing, and refining these settings so others can benefit from reliable results.\u003cbr\u003eThank you for supporting the project and helping me continue creating content for the community 🙌\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003e\u003cstrong\u003e📦 Description Template (Refined Version)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis model is a remix of the original \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.thingiverse.com\/thing:763622\"\u003e3D Benchy\u003c\/a\u003e by CreativeTools, created to evaluate and compare filament performance before and after full calibration.\u003c\/p\u003e\u003cp\u003eThe goal is to analyze how planar surfaces, overhangs, bridges, arches and fine details improve once a filament is properly tuned. As you can see below i have tested a bunch of diferent filaments.\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002484589\/design\/29c0aef04e2c1e31.png\"\u003e\u003c\/figure\u003e\u003cp\u003eThis profile reflects my complete calibration workflow using a Bambu Lab P1P (now upgraded to a P1S) with a 0.4mm nozzle.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 40.16%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002484589\/design\/e8a18dfd07a37c3f.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003eFor this specific model, the filament used is \u003cstrong\u003eElegoo PLA\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eAt the beginning of this post, you will find screenshots of the exact slicer settings used for this filament. These settings correspond to the configuration that produced the results shown in the photos📸.\u003c\/p\u003e\u003cp\u003eThe settings screenshots can also be viewed more clearly further below in the description, immediately after this section.\u003c\/p\u003e\u003cp\u003eThey are particularly useful if you are trying to troubleshoot small issues or further refine your print quality🔍. Even with the same printer model, machines are never perfectly identical, and small variations in calibration, environment or filament batches can lead to slightly different results.\u003c\/p\u003e\u003cp\u003eWhen aiming for print quality above the average, small adjustments can sometimes be necessary🎯. For this reason, I strongly recommend reading the full description, where I explain which parameters you may want to tweak if you are trying to further improve the final result.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e🧵 Choosing the Correct Base Filament Profile\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen creating filament profiles for more specific materials, I also recommend starting from the closest \u003cstrong\u003egeneric material profile\u003c\/strong\u003e available in the slicer. For example:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFor \u003cstrong\u003ePLA Silk\u003c\/strong\u003e, start from the \u003cstrong\u003eGeneric PLA Silk\u003c\/strong\u003e profile\u003c\/li\u003e\n\u003cli\u003eFor \u003cstrong\u003ePLA Basic\u003c\/strong\u003e, start from the \u003cstrong\u003eGeneric PLA\u003c\/strong\u003e profile\u003c\/li\u003e\n\u003cli\u003eFor other specialized PLA types, choose the most similar generic base profile\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUsing the correct base profile ensures that cooling behavior, extrusion characteristics and default limits are already appropriate for the material type. From there, you can then perform the calibration steps described below to further optimize the settings for your specific filament.\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002484589\/design\/d41b892826f08960.png\"\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002484589\/design\/aee02fcdb8f7c2aa.png\"\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002484589\/design\/78d3f7515b4bd0fa.png\"\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002484589\/design\/c444bf6e35d9a42d.png\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e🔬 About Calibration\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFor Bambu filaments, I generally trust the official profiles, as they are already very refined.\u003c\/p\u003e\u003cp\u003eHowever, if you are using third-party filaments, I strongly recommend following the calibration workflow described above.\u003c\/p\u003e\u003cp\u003eI invested significant time researching and testing different calibration methods to determine:\u003c\/p\u003e\u003cul style=\"list-style-type: disc\"\u003e\n\u003cli\u003eWhat is truly necessary\u003c\/li\u003e\n\u003cli\u003eWhat improves print quality\u003c\/li\u003e\n\u003cli\u003eWhat is not worth spending time on\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe workflow described in this profile is efficient, practical and produces very consistent results.\u003c\/p\u003e\u003cp\u003eIf you are using other brands, I encourage you to check the calibrated profiles available on my page and follow the same methodology — it works extremely well.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e🛠 My Calibration Workflow\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1️⃣ Manufacturer Baseline Review\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eI always begin by checking the manufacturer's website and packaging for recommended:\u003c\/p\u003e\u003cul style=\"list-style-type: disc\"\u003e\n\u003cli\u003ePrint temperature\u003c\/li\u003e\n\u003cli\u003eBed temperature\u003c\/li\u003e\n\u003cli\u003eCooling settings\u003c\/li\u003e\n\u003cli\u003eSpeed recommendations\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e(Manufacturer websites are usually the most up-to-date and reliable source.)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e2️⃣ Initial Benchy Print\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eI print this Benchy using the base profile provided here to establish a performance reference.\u003c\/p\u003e\u003cp style=\"text-align: center\"\u003e\u003cimg class=\"image_resized\" style=\"width: 60.55%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002484589\/design\/e56edf9331ecce42.png\"\u003e\u003c\/p\u003e\u003cp\u003eFrom the photos you can visually see clear under extrusion in the \u003cstrong\u003eBefore\u003c\/strong\u003e and it is also possible to see the smooth surface of the rear deck of the boat in the \u003cstrong\u003eAfter\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3️⃣ Temperature Tower Test 🌡\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eI print a temperature tower specific to the material.\u003c\/p\u003e\u003cp\u003eFrom this test, I select the temperature that provides the best balance between overhangs, stringiness and surface quality.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp style=\"text-align: center\"\u003e\u003cimg class=\"image_resized\" style=\"width: 45.96%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002484589\/design\/30295b9d087af643.jpeg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e4️⃣ Maximum Volumetric Flow Test 🚀\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFor high-speed materials (for example PETG Rapid), I run a maximum volumetric flow test and adjust the value accordingly.\u003c\/p\u003e\u003cp\u003e⚠ If the manufacturer does NOT advertise high-speed capability, I recommend keeping the default value — even if tests suggest an increase of +5–6 mm³\/s.\u003c\/p\u003e\u003cp\u003eThat margin usually represents the safety buffer designed to ensure consistent and reliable printing.\u003c\/p\u003e\u003cp style=\"text-align: center\"\u003e\u003cimg class=\"image_resized\" style=\"width: 45.15%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002484589\/design\/b59343e34298c2a0.jpeg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e5️⃣ Flow Dynamics Calibration ⚙\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUsing the built-in calibration tools in Bambu Studio, I fine-tune flow dynamics to improve extrusion consistency and corner behavior.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp style=\"text-align: center\"\u003e\u003cimg class=\"image_resized\" style=\"width: 45.94%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002484589\/design\/b83eba1177338497.jpeg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e6️⃣ Flow Rate Calibration 🎯\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFinally, I perform a flow rate calibration using the Bambu Studio calibration menu to achieve optimal extrusion accuracy.\u003c\/p\u003e\u003cp style=\"text-align: center\"\u003e\u003cimg class=\"image_resized\" style=\"width: 44.85%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002484589\/design\/154eb3fdbc53969a.jpeg\"\u003e\u003c\/p\u003e\u003cp\u003eBambu provides an excellent guide explaining how to properly analyze calibration results here:\u003c\/p\u003e\u003cp\u003e👉\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/wiki.bambulab.com\/en\/bambu-studio\/Calibration\"\u003e[Bambu official calibration guide link]\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e📸 Additional Calibrated Profiles\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn my profile, you can find other calibrated Benchy models where I share:\u003c\/p\u003e\u003cp\u003e• Tested print settings\u003c\/p\u003e\u003cp\u003e    • Optimized temperatures\u003c\/p\u003e\u003cp\u003e    • Flow adjustments\u003c\/p\u003e\u003cp\u003e    • Volumetric limits\u003c\/p\u003e\u003cp\u003e• Real print photos\u003c\/p\u003e\u003cp\u003e• Final recommendations for that filament\u003c\/p\u003e\u003cp\u003eAll profiles are tested and calibrated on my machine. They are optimized for Bambu Lab printers, and in many cases may also work well on other printers with similar hardware and setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e🙌 Support \u0026amp; Feedback\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf you find this profile useful, please consider leaving a like 👍\u003c\/p\u003e\u003cp\u003eAnd if possible, a Boost 🚀 — it helps me continue developing high-quality calibrated profiles and testing new materials to share with the community.\u003c\/p\u003e\u003cp\u003eThank you for your support!\u003c\/p\u003e\u003cp\u003eDesign by Bruno Pereira on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67399188807984,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_fe10b1ea-bb93-4142-96ac-77240e6fd466.png?v=1784898148","url":"https:\/\/mymadmanlab.com\/products\/benchy-elegoo-pla-calibrated-filament-settings","provider":"Mymadmanlab.com","version":"1.0","type":"link"}