{"product_id":"black-and-decker-20v-locking-battery-wall-mount","title":"Black and Decker 20V Locking Battery Wall Mount","description":"\u003cp\u003eI needed to print some battery holder wall mounts for my Black and Decker 20v Lithium batteries to tidy up my shop. I found this model that allows the battery to lock into place and oriented it to print vertically with minimal supports, I heavily remixed it to optimize strength and print time printable on all bambu printers. It is compatible with all 20v black and decker batteries, supporting all amp hour ratings (including extended).\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUpdate: \u003c\/strong\u003eV2, 2 Hole mounting Fast Profiles added, Fast Batch Profile Added. Reduced by 5g per wall mount. \u003cbr\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterials Needed to Mount:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFor mounting all you need is (2) #8 philips or torx screw, 1\" or 1.5\" length should be all you need. Be sure not to over tighten or else the PETG will crack. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMounting Orientation: \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYou should be able to mount these in any direction since they lock into place.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePrint Profile Notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNozzle:\u003c\/strong\u003e Suggest 0.4mm nozzle for precision fit\u003cbr\u003e\u003cstrong\u003eWall Loops:\u003c\/strong\u003e 3 wall loops on 0.4mm nozzle, 0.6mm nozzle not recommended due to decreased layer adhesion. \u003cbr\u003e\u003cstrong\u003eLayer Height: \u003c\/strong\u003eSuggest 0.16 or 0.20mm to maximize strength (0.20mm default)\u003cbr\u003e\u003cstrong\u003eInfill:\u003c\/strong\u003e 15% gyroid (can bump to 20% for more strength)\u003cbr\u003e\u003cstrong\u003eBrim: \u003c\/strong\u003eNone on textured build plate. Consider brim for smooth PEI plate. \u003cbr\u003e\u003cstrong\u003eBatch Size:\u003c\/strong\u003e For optimum layer adhesion advise printing one part at a time to keep layers hot (2 parts tops). For large Batches reduce fan cooling. PETG performs worse if layers cool too much, and you risk a layer shift on bed-slingers like A1. \u003cbr\u003e\u003cstrong\u003eMaterial: \u003c\/strong\u003ePETG, PLA, or ABS\u003cbr\u003e\u003cstrong\u003eColor: \u003c\/strong\u003eAny\u003cbr\u003e\u003cstrong\u003ePrint Orientation:\u003c\/strong\u003e Print vertically as seen in .3mf file. \u003cbr\u003e\u003cstrong\u003eSupports: \u003c\/strong\u003eUsing low threshold angle (1 degree) to only use supports where the battery locks into place. \u003cbr\u003e\u003cstrong\u003e3d Printers:\u003c\/strong\u003e Should be printable on any printer.\u003cbr\u003e\u003cstrong\u003eFilament amount required: \u003c\/strong\u003e32.87g per holder\u003c\/p\u003e\u003cp\u003eDesign by NDMstr on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67408411853104,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_98699761-45c9-4f8b-9860-13ba744fde00.png?v=1785219314","url":"https:\/\/mymadmanlab.com\/products\/black-and-decker-20v-locking-battery-wall-mount","provider":"Mymadmanlab.com","version":"1.0","type":"link"}