{"product_id":"calicar-the-calibration-car","title":"CaliCar - The Calibration Car","description":"\u003cp\u003e\u003cstrong\u003eAbout\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003ci\u003eDo we really need another calibration model? Sure, why not!\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003ci\u003e\u003cstrong\u003eCaliCar is licensed under the Creative Commons Attribution license, meaning you are free to remix it and you can even sell prints of it if you like. If you remix it, you must attribute the original design.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001035700\/design\/2025-01-25_b04owo0zmvgt.png\"\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001035700\/design\/2025-01-25_bvl91gcqf1vy.jpg\"\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001035700\/design\/2025-01-25_ukhof2mfmhi9.jpg\"\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001035700\/design\/2025-01-25_x9s5712asvfp.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003eCaliCar is a small calibration print, only around 15g that tests a number of things to challenge and dial in your printer.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003ci\u003e\u003cstrong\u003eTests:\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlow Ratio \/ Tolerances (print-in-place wheels, should rotate)\u003c\/li\u003e\n\u003cli\u003eRinging test (bottom of car text)\u003c\/li\u003e\n\u003cli\u003eBridging test (inside of right side)\u003c\/li\u003e\n\u003cli\u003eOverhangs \/ parts cooling test (supercharger, steering wheel)\u003c\/li\u003e\n\u003cli\u003eFirst layer adhesion\u003c\/li\u003e\n\u003cli\u003eFirst layer fine details (wheels, vents, steering wheel)\u003c\/li\u003e\n\u003cli\u003eFine details (wheels, steering wheel, vents)\u003c\/li\u003e\n\u003cli\u003ePress fit test (two CaliCars should join nicely)\u003c\/li\u003e\n\u003cli\u003eHole test (headlights, sidepipe, filament hole in middle rear)\u003c\/li\u003e\n\u003cli\u003eSpeed! How fast can you print one?\u003c\/li\u003e\n\u003c\/ul\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001035700\/design\/2025-01-25_etachrcs4y25.png\"\u003e\u003c\/figure\u003e\u003cp\u003eHere are some of the tests in details so you know what to look for.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eYou can measure the print with calipers to find your dimensional accuracy.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe dimensions are:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCar length: 70.00 mm\u003c\/li\u003e\n\u003cli\u003eCar width: 25.00 mm\u003c\/li\u003e\n\u003cli\u003eSteering wheel diameter: 12.50 mm\u003c\/li\u003e\n\u003cli\u003eWheel diameter: 15.50 mm\u003c\/li\u003e\n\u003cli\u003eSidepipe: 4.00 mm (hole: 1.85 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBridging test\u003c\/strong\u003e\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001035700\/design\/2025-01-25_hrz9xzqm3xcp.png\"\u003e\u003c\/figure\u003e\u003cul\u003e\n\u003cli\u003eThere is a bridging test on the inside wall of the right hand side with the door area being visible for inspection. \u003c\/li\u003e\n\u003cli\u003eThe bridging distance is over \u003ci\u003e32 mm\u003c\/i\u003e so it can be a challenge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOverhangs test\u003c\/strong\u003e\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001035700\/design\/2025-01-25_bjjbqv6hb07a.png\"\u003e\u003c\/figure\u003e\u003cul\u003e\u003cli\u003eThere are some steep overhangs as a test, particularly the supercharger and steering wheel and to some extent the headlights as well but those normally should clear fine.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePress fit test\u003c\/strong\u003e\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001035700\/design\/2025-01-25_so2kmmntrh4s.png\"\u003e\u003c\/figure\u003e\u003cul\u003e\n\u003cli\u003eYou can join two cars as a press fit test, they are joined by the sidepipe and the corresponding cutout on the other side of the car. \u003c\/li\u003e\n\u003cli\u003eIf you can't join them you could be overextruding a bit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFlow Ratio \/ Tolerances\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0.20 mm tolerance test, the wheels should rotate and not get stuck to the car.\u003c\/li\u003e\n\u003cli\u003eThe wheels are removable and can be swapped over to another CaliCar.\u003c\/li\u003e\n\u003cli\u003eIf your print is overextruded it's possible the wheels get stuck and won't rotate.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001035700\/design\/2025-01-25_y179x2yv5bsh.png\"\u003e\u003c\/figure\u003e\u003cp\u003e\u003cstrong\u003eRinging test (bottom of car text)\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe CaliCar text is placed on bottom of the car but as the test is printed on its side it's actually being printed throughout the whole test and is a good ringing test. \u003c\/li\u003e\n\u003cli\u003eThe letters protrude 1.00 mm. \u003c\/li\u003e\n\u003cli\u003eYou may not get any defects if you're not using high acceleration and travel speed. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001035700\/design\/2025-01-25_ru84ga4ub2vq.png\"\u003e\u003c\/figure\u003e\u003cp\u003e\u003cstrong\u003eHole test\u003c\/strong\u003e\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001035700\/design\/2025-01-25_vv2dfwt46jsh.png\"\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001035700\/design\/2025-01-25_2mqrjieygmwz.png\"\u003e\u003c\/figure\u003e\u003cul\u003e\n\u003cli\u003eHeadlights diameter: 5.00 mm\u003c\/li\u003e\n\u003cli\u003eSupercharger hole diameter: 2.30 mm\u003c\/li\u003e\n\u003cli\u003eRear middle hole (1.85 mm - press test fitment of a piece filament)\u003c\/li\u003e\n\u003cli\u003eSidepipe hole (1.85 mm - press test fitment of a piece filament)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSupport\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eAll my designs and mods on MakerWorld are free to use and remix. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.paypal.me\/humebeamengineering\"\u003e\u003cstrong\u003ehttps:\/\/www.paypal.me\/humebeamengineering\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePrint Settings\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ePrint it in the direction I have set it, it prints on its side. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eI recommend using (min.) 2 walls and 15% infill for this test.\u003c\/p\u003e\u003cp\u003eDesign by humebeam on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67439585788208,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_60a61db6-f5fa-40ac-92e1-cd80967e9731.png?v=1785760281","url":"https:\/\/mymadmanlab.com\/products\/calicar-the-calibration-car","provider":"Mymadmanlab.com","version":"1.0","type":"link"}