{"product_id":"case-for-raspberry-pi-5-with-pineberry-pi-hatdrive-bottom","title":"Case for Raspberry Pi 5 with Pineberry Pi HatDrive! Bottom","description":"\u003cp\u003eI have just received a “HatDrive! Bottom” for my Raspberry Pi 5, which I ordered to use an NVMe SSD instead of the usual SD card. Since I could not find any case for this combo, I quickly modeled this very basic one. Please note that I only exposed the basic ports (USB, Ethernet, power, and HDMI) and the on\/off button. No point leaving a slot for the SD card, since it is blocked by the FPC ribbon cable, and I do not use the MIPI DSI\/CSI connectors. The HatDrive's board is a bit longer than the pi, so the on\/off button is a bit far inside, but it is reachable through the small hole.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThere should be sufficient airflow: I am using the official Active Cooler and I can't reach 70ºC, even after more than 10 minutes under full load (running “stress -c 4”). I also added a grid pattern on the bottom side, so that the NVMe drive has some air, though mine did not seem to heat up.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe two sides slide into each other, and you can secure them with M3 bolts (anything longer than 15mm should be fine).\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;\"\u003eI printed this in ABS, PLA might deform pretty quickly give the temperature. PETG should work fine as well, but I had a roll of ABS in the AMS, so I went with that.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eDesign by tagliasteel on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67400550383920,"sku":null,"price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_0ab76d45-c4f6-4790-b5c1-dd9139e3bebd.png?v=1784950238","url":"https:\/\/mymadmanlab.com\/products\/case-for-raspberry-pi-5-with-pineberry-pi-hatdrive-bottom","provider":"Mymadmanlab.com","version":"1.0","type":"link"}