{"product_id":"corner-square-holder","title":"Corner Square Holder","description":"\u003cp\u003eUpdates:\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e22 September 2025:\u003c\/p\u003e\u003cp\u003eAdded a slight tilt back on every model to more securely hold the squares in place per \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/@strikerx22\/upload\"\u003e@strikerx22\u003c\/a\u003e's reported issue of the squares easily falling off.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e18 June 2025:\u003c\/p\u003e\u003cp\u003eBased on \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/@Kadaveros\/upload\"\u003e@Kadaveros\u003c\/a\u003e to fit his larger, 40mm wide x 30 mm thick, corner squares. I've uploaded 2 print profiles for this larger size, PETG and PLA profiles. Please pick the one appropriate for your corner squares: New versions are 40x30mm. The original ones are 30x25mm.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e-----\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThis is a new model, inspired by \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/@lordjustice17\"\u003e@lordjustice17\u003c\/a\u003e 's \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/models\/1032714\"\u003eFrench Cleat Corner Square Holder\u003c\/a\u003e, designed for printability. Horizontal lines are chamfered, and vertical lines are beveled. Printed on its side, there is no layer line weakness or supports required. A 1mm beaded lip helps keep your corner clamps on the holder without interfering in easily getting and returning them to your holder. These fit my \u003cstrong\u003e1-3\/8\" (35mm)\u003c\/strong\u003e corner clamps. It should hold smaller ones. Trying to make this as compact as possible means it will not fit anything over that size.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ePETG and PLA profiles provided. I print almost exclusively shop stuff in PETG. I realize not everyone does this, so the PLA profile provides a download-and-print version without needing to mod your profile. I've given both a slight speed increase since the “overhangs” are all 45 degrees. The do not need to go super slow for a good result. Gyroid for infil for both speed of printing and high strength, strength to weight ratio. Since this is a shop accessory, the profiles are .28mm super draft mode for strength and speed. Even though these changes enhance strength, the plastic corner clamps are light. 15% may be overkill. If you print lower and it works for you, let everyone know!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eHanging your corner clamps from an easily accessible French cleat hanger. French cleats give you infinite flexibility for wall placement. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eFinally, ignore the finish sheen line. I finished off a roll or regular PETG and switched to a matte finish PETG. It is a material\/branch switch and not an artifact of the design or print profile. My shop prints often end up with much more funky color schemes when use up partial rolls.\u003c\/p\u003e\u003cp\u003eDesign by Mitch on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67383300489520,"sku":null,"price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_b377eee6-fe53-4cd0-8834-67f345416cee.png?v=1784497707","url":"https:\/\/mymadmanlab.com\/products\/corner-square-holder","provider":"Mymadmanlab.com","version":"1.0","type":"link"}