{"product_id":"customisable-name-christmas-gift-tag-gingerbread-1","title":"Customisable name Christmas gift tag - Gingerbread","description":"\u003ch2\u003e🎄Customisable gingerbread style Christmas gift tags - No AMS required! 🎄\u003c\/h2\u003e\u003cp\u003eGet festive with your printer! These fun, customisable Christmas gift tags are styled like iced gingerbread biscuits (cookies) in several delightful Christmas themes.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThey’re fast and easy to print, and you can personalise the name directly in Bambu Studio.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eNo AMS needed, details in the \u003cstrong\u003ePrinting\u003c\/strong\u003e section below. \u003c\/p\u003e\u003cblockquote\u003e\u003cp\u003eFor anyone new to changing settings within Bambu Studio, don't panic! - I've walked through each step with screenshots - If at any point you've made changes that you aren't happy with, just hit undo (Ctrl-Z\/Command-Z) and start those changes again.\u003c\/p\u003e\u003c\/blockquote\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eIf you like this festive design, please consider a boost as an early Christmas present to me :)\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003eSet 2 now uploaded - If you like these, you'll definitely like set 2:\u003c\/p\u003e\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/1976076-personalised-gingerbread-xmas-gift-tag-set-2\"\u003ehttps:\/\/makerworld.com\/en\/models\/1976076-personalised-gingerbread-xmas-gift-tag-set-2\u003c\/a\u003e\u003c\/p\u003e\u003cblockquote\u003e\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/1976076-personalised-gingerbread-xmas-gift-tag-set-2\"\u003e\u003cimg class=\"image_resized\" style=\"width: 32.37%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001961652\/design\/2025-11-09_22c07896eafb98.jpg\"\u003e\u003c\/a\u003e \u003c\/p\u003e\u003c\/blockquote\u003e\u003ch3\u003e🎨 Customising Your Tag\u003c\/h3\u003e\u003cp\u003eFirst off, if you want to match the style I've used here, you'll need to install the “Winter Wishes” font, that's free to download from Da Font here: \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.dafont.com\/winter-wishes.font\"\u003ehttps:\/\/www.dafont.com\/winter-wishes.font\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eAfter installing, \u003cstrong\u003erestart Bambu Studio\u003c\/strong\u003e so the font becomes available to use. \u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003eEditing the Name\u003c\/strong\u003e\u003c\/h4\u003e\u003cp\u003e1. Open your chosen tag file (print profile) in \u003cstrong\u003eBambu Studio\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e2. In the \u003cstrong\u003eProcess\u003c\/strong\u003e panel, click \u003cstrong\u003eObjects\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e3. Expand the plate and object list until you find \u003cstrong\u003e“To Name”\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001961652\/design\/2025-11-05_4e97c5525fc8f8.png\"\u003e\u003c\/p\u003e\u003cp\u003e4.\u003cstrong\u003e Left-click\u003c\/strong\u003e to highlight it.\u003c\/p\u003e\u003cp\u003e5.\u003cstrong\u003e Right-click → Edit Text\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001961652\/design\/2025-11-05_1aa82fbcd4aac.png\"\u003e\u003c\/p\u003e\u003cp\u003e6. Enter your custom name in the \u003cstrong\u003eInput Text\u003c\/strong\u003e box.\u003c\/p\u003e\u003cp\u003e7. Choose the \u003cstrong\u003eWinter Wishes\u003c\/strong\u003e font (or search for it).\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001961652\/design\/2025-11-05_ac250738dd4d08.png\"\u003e\u003c\/p\u003e\u003cblockquote\u003e\u003cp\u003e💡 You can use another font if you like, but note that this print profile was designed around “Winter Wishes.” Thin or intricate fonts may need line-width adjustments. \u003cstrong\u003eAlways check the preview before printing\u003c\/strong\u003e.\u003c\/p\u003e\u003c\/blockquote\u003e\u003ch4\u003eFont and Size Notes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe font size is typically \u003cstrong\u003e12 \u003c\/strong\u003eor\u003cstrong\u003e 13\u003c\/strong\u003e, depending on the model.\u003c\/li\u003e\n\u003cli\u003eFor longer names, reduce the font size slightly and \u003cstrong\u003echeck the preview \u003c\/strong\u003ebefore printing to see if any line width adjustments are needed.\u003c\/li\u003e\n\u003cli\u003eDo not change the \u003cstrong\u003eZ height\u003c\/strong\u003e, keep it at \u003cstrong\u003e0.75mm\u003c\/strong\u003e so the name prints at the correct layer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMoving the Name\u003c\/h4\u003e\u003cp\u003eIf you need to reposition it:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSelect the \u003cstrong\u003eTo Name\u003c\/strong\u003e object, then click \u003cstrong\u003eMove\u003c\/strong\u003e from the top toolbar.\u003c\/li\u003e\n\u003cli\u003eUse the arrows to adjust placement.\u003c\/li\u003e\n\u003cli\u003eDo \u003cstrong\u003enot\u003c\/strong\u003e change the Z height from 0.75mm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001961652\/design\/2025-11-05_8c6f8a278c76e8.png\"\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eOnce you are happy, save your project before slicing, this allows you to easily re-print the tag without having to make the changes again.\u003c\/p\u003e\u003ch3\u003e🖨️ Printing Setup\u003c\/h3\u003e\u003cp\u003eEach tag has its own \u003cstrong\u003eprint profile\u003c\/strong\u003e, so just download the ones you want. Some designs have more name space than others.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuild plate:\u003c\/strong\u003e Your choice\u003cbr\u003e\u003cstrong\u003eFilament examples:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBambu Matte PLA \u003ci\u003eCaramel\u003c\/i\u003e (for gingerbread)\u003c\/li\u003e\n\u003cli\u003eBambu Basic PLA \u003ci\u003eWhite\u003c\/i\u003e (for icing)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLinks for both can be found within the BOM (Bill of Materials) on this page.\u003c\/p\u003e\u003ch4\u003eAMS Users\u003c\/h4\u003e\u003cp\u003eLoad both filaments into the AMS, you’re ready to print!\u003c\/p\u003e\u003ch4\u003eNon-AMS Users\u003c\/h4\u003e\u003cp\u003e1.\u003cstrong\u003e Slice plate \u003c\/strong\u003eor click \u003cstrong\u003ePreview\u003c\/strong\u003e, scroll to \u003cstrong\u003eLayer 8\u003c\/strong\u003e*\u003cstrong\u003e \u003c\/strong\u003eon the right handside scroll bar.\u003c\/p\u003e\u003cp\u003e2.\u003cstrong\u003e Right-click → Add Pause.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001961652\/design\/2025-11-05_1537b62a24d0f8.png\"\u003e\u003c\/p\u003e\u003cp\u003e3. Start printing with your \u003cstrong\u003egingerbread\u003c\/strong\u003e colour.\u003c\/p\u003e\u003cp\u003e4. When the printer pauses, swap to the \u003cstrong\u003ewhite filament\u003c\/strong\u003e and continue.\u003cbr\u003e\u003cbr\u003e* If in the preview on layer 8 you don't just see the gingerbread part, please check the Z height of the name (under move) to ensure it is at 0.75. If you have resized (under Further Personalisation below), please check the Z height under Scale is 2.20mm\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003e🔧 Further Personalisation\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eFor \u003cstrong\u003elonger names\u003c\/strong\u003e, consider \u003cstrong\u003eresizing\u003c\/strong\u003e the tag to keep lines from becoming too thin.\u003c\/p\u003e\u003ch4\u003eHow to Resize\u003c\/h4\u003e\u003cp\u003e1. Select the \u003cstrong\u003ewhole tag\u003c\/strong\u003e (not individual parts).\u003c\/p\u003e\u003cp\u003e2. Click \u003cstrong\u003eScale\u003c\/strong\u003e from the top toolbar.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001961652\/design\/2025-11-05_b8882c827f22e.png\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001961652\/design\/2025-11-05_952afbb96a4c.png\"\u003e\u003c\/p\u003e\u003cp\u003e3. Adjust the \u003cstrong\u003elargest dimension\u003c\/strong\u003e first.\u003c\/p\u003e\u003cp\u003e4. Once happy with the size, untick \u003cstrong\u003eUniform Scale\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e5. Set the \u003cstrong\u003eZ height back to 2.20mm\u003c\/strong\u003e.\u003c\/p\u003e\u003cblockquote\u003e\u003cp\u003eThis keeps the gingerbread layer at 1.5mm, icing at 0.7mm, and the name at 0.75mm. Double-check the Z height of “To Name” (Move → verify it’s 0.75mm).\u003c\/p\u003e\u003c\/blockquote\u003e\u003cp\u003eFinally, \u003cstrong\u003eslice and preview\u003c\/strong\u003e your model. If the fill looks odd or too thin in the name, tweak the \u003cstrong\u003einner and outer wall line widths\u003c\/strong\u003e of To Name (the ones with padlock icons) until it looks solid. I'd recommend following the same process if changing fonts too.\u003c\/p\u003e\u003ch3\u003e🧰 Troubleshooting\u003c\/h3\u003e\u003cp\u003eIf your tag slices or prints with the name appearing too early (before the icing layer), or you see white “icing” artefacts appearing on the gingerbread section, don’t worry!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThis usually happens because Bambu Studio has automatically changed the Z height of the name object.\u003c\/p\u003e\u003cp\u003eHere’s how to fix it:\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e1. In \u003cstrong\u003eBambu Studio\u003c\/strong\u003e, click on the \u003cstrong\u003eTo Name\u003c\/strong\u003e object in the \u003cstrong\u003eObjects\u003c\/strong\u003e panel.\u003c\/p\u003e\u003cp\u003e2. Click the \u003cstrong\u003eMove\u003c\/strong\u003e icon in the top toolbar.\u003c\/p\u003e\u003cp\u003e3. Check the \u003cstrong\u003eZ height value, \u003c\/strong\u003eit should be \u003cstrong\u003e0.75mm\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e4. If it’s not, simply change it back to \u003cstrong\u003e0.75\u003c\/strong\u003e and hit Enter.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001961652\/design\/2025-11-09_208cbfbce419f8.png\"\u003e\u003c\/p\u003e\u003cblockquote\u003e\u003cp\u003e\u003ci\u003e💡 Once corrected, re-slice your model. You should now see the name start at \u003cstrong\u003elayer 9\u003c\/strong\u003e or later, with no premature printing on the gingerbread layer.\u003c\/i\u003e\u003c\/p\u003e\u003c\/blockquote\u003e\u003ch4\u003e📦 Model Doesn’t Match Preview \/ Wrong Colours \/ Odd Layout \/ Dots instead of lines or shapes\u003c\/h4\u003e\u003cp\u003eIf your model looks misaligned, missing colours, or prints incorrectly, please make sure you are using the supplied 3MF print profiles, not the raw STL or STEP files.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe 3MF files contain all the model specific tuning, including:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCorrect object positioning including Z height\u003c\/li\u003e\n\u003cli\u003eColour allocations\u003c\/li\u003e\n\u003cli\u003eLine width settings\u003c\/li\u003e\n\u003cli\u003ePrint specific adjustments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTo use them properly:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEither click \u003cstrong\u003e“Open in Bambu Studio”\u003c\/strong\u003e directly from MakerWorld,\u003cbr\u003e\u003cstrong\u003eor\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDownload the \u003cstrong\u003e.3MF\u003c\/strong\u003e file and open it manually in Bambu Studio.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e❌ Avoid using the \u003cstrong\u003eraw STL or STEP files\u003c\/strong\u003e unless you specifically want to rebuild your own profiles, they do \u003ci\u003enot\u003c\/i\u003e include the tuned print settings.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease remember, however delicious these may come out looking, they are not edible - Please supervise any young children you are giving these to! 😊\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDesign by Dave W on MakerWorld (license: BY-ND).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67391433965872,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_dc25dc03-dba8-4ec3-a4b1-2a31470b2d65.png?v=1784750951","url":"https:\/\/mymadmanlab.com\/products\/customisable-name-christmas-gift-tag-gingerbread-1","provider":"Mymadmanlab.com","version":"1.0","type":"link"}