{"product_id":"customizable-usb-drive-storage-box-and-sd-cards","title":"Customizable USB Drive Storage Box (and SD cards)","description":"\u003cp\u003e\u003cstrong\u003eAn updated version of this model is available here:\u003c\/strong\u003e \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/2595134-customizable-usb-and-sd-card-storage-box-v2\"\u003ehttps:\/\/makerworld.com\/en\/models\/2595134-customizable-usb-and-sd-card-storage-box-v2\u003c\/a\u003e \u003cbr\u003e\u003cbr\u003eSimple but robust latching box to store USB drives (aka flash drives or thumb drives), SD cards, and microSD cards. You can customize the dimensions and number of compartments, so really this could be used to store lots of other stuff too. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eIncludes optional inserts for holding SD cards and microSD cards. These automatically adapt to the length and width of the compartments and cannot be customized; they may not work properly if the main compartments are made smaller in any dimension, but should work fine with bigger compartments.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe provided print profile model features 12 compartments (2 rows of 6) with each compartment measuring 60x14x24mm, which should be large enough to accommodate the majority of USB drive models. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUpdate 9\/6\/2025:\u003c\/strong\u003e Fixed an issue when the compartment length value was too small; added parameter to control depth of lid compartment walls. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eCustomization\u003c\/h2\u003e\u003cp\u003eThe size and number of compartments can be customized, along with various wall, top, and bottom thicknesses. I've tested a wide range of values to try to ensure that anything that'll fit on your print bed should generate properly. Though the small hinges may not work well for particularly large boxes. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe text is NOT customizable through the website (because Fusion does not support parameterized text). I added it using the slicer. If you make a custom box you'll have to similarly add the text yourself. \u003c\/p\u003e\u003ch2\u003ePrinting Instructions\u003c\/h2\u003e\u003cp\u003eFor some reason the hinges need to be pointing to the right when printing, at least on my A1 printer. When facing left they always came out messy and badly-formed, and I'm not sure why. Refer to the orientation in the provided print profile. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eI've only tested the hinges when printed at a 0.2mm layer height; they may not print as well at larger layer heights. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eAssembly and Use\u003c\/h2\u003e\u003cp\u003eThe top and bottom just snap together at the hinges. Carefully snap one hinge together in a slight rotating motion, then press the second hinge straight together. The second hinge will require a bit of careful force. \u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 76.54%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001613152\/design\/2025-07-16_84c4d430c17ce8.png\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe printed latch is fairly strong to ensure the box doesn't accidentally come open. You may need to gently press the lid forward and the bottom backwards at the same time while opening to get it to unlatch. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eLike it? Leave a like.\u003cbr\u003eLOVE it? Boost it!\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003ch2\u003eLicense\u003c\/h2\u003e\u003cp\u003eAs of 3\/29\/2026 this model is now published under the CC-BY-SA license\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesign by Aptimex on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67375191916848,"sku":null,"price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_10359a71-c45b-4bfe-89ce-1b52a6ae9684.png?v=1784229149","url":"https:\/\/mymadmanlab.com\/products\/customizable-usb-drive-storage-box-and-sd-cards","provider":"Mymadmanlab.com","version":"1.0","type":"link"}