Cutter and mould for a heart-shaped clay plate

The printing is relatively uncomplicated; I used some supports to make the print cleaner, but these aren't absolutely necessary.

The clay should first be rolled out and cut using the cookie cutter. The cookie cutter is slightly larger than the heart mold. The cut-out clay can either be placed over the heart mold and gently shaped into position using a sponge, or you can place the cut-out clay on foam, position the heart mold, and press it down so the clay takes the heart shape.

Let the clay dry slightly - you can also dry it evenly using a hair dryer - and then remove the 3D printed heart mold.

Have fun printing and creating!

Design by Pok77emoncat on MakerWorld (license: CC0).