{"product_id":"disco-daylight-stick-mount-for-voron-trident-bed","title":"Disco \u0026 Daylight Stick mount for Voron Trident Bed","description":"\u003ch2\u003eHardware\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e4x M3x8\u003c\/li\u003e\n\u003cli\u003e4x M3 Roll-in nuts or M3 hammer-head t nuts\u003c\/li\u003e\n\u003cli\u003e2x M3x5\u003c\/li\u003e\n\u003cli\u003e2x M3 Heatset Inserts (voron style)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFile Selection\u003c\/h2\u003e\u003ch3\u003eAll Parts files \u0026amp; BambuStudio Project\u003c\/h3\u003e\u003cp\u003eThe all_parts files have all the options for the given size.  For these, pick the diffuser size (x1 or x3) that your printer is able to print, pick the thickness you want (or print each and test) and then print one each of the housings.  Don't try to print them multi-color, move the black parts to a separate build plate.\u003c\/p\u003e\u003ch3\u003eDiffuser\u003c\/h3\u003e\u003cp\u003ePrint the housing in whatever color you want.  Use Natrual ASA for the diffuser.  There are three diffuser thicknesses to choose from and there are full-length diffusers and ⅓ length diffusers (in case you're printing on a smaller printer).\u003c\/p\u003e\u003ch4\u003eDiffuser Thickness\u003c\/h4\u003e\u003cp\u003eThe pictures show the 1.4mm diffuser and LEDs running at colors set at 10% brightness.  Print samples of each (the x3 files work well for this) and test what suits your needs.\u003c\/p\u003e\u003ch3\u003eHousing\u003c\/h3\u003e\u003cp\u003eThere are two housing options.  One has a cutout for the cable exit.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003eInstall the heatset inserts into both of the housings.\u003c\/li\u003e\n\u003cli\u003eUse roll in nuts or hammer-head t nuts to mount the two housings to the front of the bed support extrusion.  Make sure the two housings are snug against each other in the middle.  Use the M3x8 bolts here.\u003c\/li\u003e\n\u003cli\u003eCut wire to length.  I'd suggest running from the very end of the housing, out the hole, along the back bed support extrusion, through the bed cable chain, and into the electronics bay.\u003c\/li\u003e\n\u003cli\u003eCrimp the wire, then route it.\u003c\/li\u003e\n\u003cli\u003ePlug the wire into the PCB.\u003c\/li\u003e\n\u003cli\u003eMake sure the wire nests into the channel inside the housing and doesn't get squished by the PCB or the plug.\u003c\/li\u003e\n\u003cli\u003eScrew the PCB onto the housing.  Use the M3x5 bolts here.\u003c\/li\u003e\n\u003cli\u003eStarting from the outside end, snap the diffuser into place.  If using the x3 variant, install the middle one on the end and then slide it from the end to the middle, then install the other two from their respective ends.\u003c\/li\u003e\n\u003cli\u003eConnect the other end of the wire to your control board.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eMacros\u003c\/h2\u003e\u003cp\u003eHere's the klipper macros I'm using for the bed LEDs\u003c\/p\u003e\u003cblockquote\u003e\n\u003cp\u003e[led_effect effect_nozzle_temp]\u003cbr\u003eautostart:              false\u003cbr\u003eframe_rate:             24\u003cbr\u003eleds:\u003cbr\u003e   neopixel:bed_status (1-11)\u003cbr\u003eheater: \"extruder\"\u003cbr\u003elayers:\u003cbr\u003e   heatergauge -1 0 add       (0.1, 0,     0),   (0.1,0,     0) \u003cbr\u003e   heatergauge -1 0 subtract  (0,   0.085, 0.1), (0,  0.085, 0.1)\u003cbr\u003e   static       0 0 top       (0,   0.085, 0.1)\u003cbr\u003e   \u003cbr\u003e[led_effect effect_bed_temp]\u003cbr\u003eautostart:              false\u003cbr\u003eframe_rate:             24\u003cbr\u003eleds:\u003cbr\u003e   neopixel:bed_status (25-15)\u003cbr\u003eheater: \"heater_bed\"\u003cbr\u003elayers:\u003cbr\u003e   heatergauge -1 0 add       (0.1, 0,     0),   (0.1,0,     0) \u003cbr\u003e   heatergauge -1 0 subtract  (0,   0.085, 0.1), (0,  0.085, 0.1)\u003cbr\u003e   static       0 0 top       (0,   0.085, 0.1)\u003c\/p\u003e\n\u003cp\u003e[led_effect effect_print_progress]\u003cbr\u003eautostart:              false\u003cbr\u003eframe_rate:             24\u003cbr\u003eleds:\u003cbr\u003e   neopixel:bed_status (25-1)  \u003cbr\u003elayers:\u003cbr\u003e   progress -1 0 add       (0,0.2,0),(0,0.1,0)\u003cbr\u003e   progress -1 0 subtract  (0,0.085,0.1),(0,0.085,0.1)\u003cbr\u003e   static    0 0 top       (0,0.085,0.1)\u003cbr\u003e   \u003c\/p\u003e\n\u003cp\u003e[gcode_macro PRINT_START]\u003cbr\u003egcode: \u003cbr\u003e   SET_LED_EFFECT EFFECT=effect_nozzle_temp RESTART=1 REPLACE=1\u003cbr\u003e   SET_LED_EFFECT EFFECT=effect_bed_temp RESTART=1 REPLACE=1\u003c\/p\u003e\n\u003cp\u003e   # Homing, heating up\u003cbr\u003e   # ...\u003cbr\u003e   # Very end of the macro\u003c\/p\u003e\n\u003cp\u003e   SET_LED_EFFECT EFFECT=effect_print_progress RESTART=1 REPLACE=1\u003c\/p\u003e\n\u003cp\u003e[gcode_macro PRINT_END]\u003cbr\u003egcode:\u003cbr\u003e   SET_LED_EFFECT EFFECT=effect_nozzle_temp RESTART=1 REPLACE=1\u003cbr\u003e   SET_LED_EFFECT EFFECT=effect_bed_temp RESTART=1 REPLACE=1\u003c\/p\u003e\n\u003cp\u003e   # all the normal print_end stuff\u003c\/p\u003e\n\u003cp\u003e   STOP_LED_EFFECTS\u003c\/p\u003e\n\u003c\/blockquote\u003e\u003cp\u003eDesign by RagingRoosevelt on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67391331926320,"sku":null,"price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_574dc714-8702-4c69-855b-bd8614f08b70.png?v=1784747470","url":"https:\/\/mymadmanlab.com\/products\/disco-daylight-stick-mount-for-voron-trident-bed","provider":"Mymadmanlab.com","version":"1.0","type":"link"}