{"product_id":"fnt-x1-base-anti-vibration-buildplate-holder","title":"FNT X1 Base Anti-Vibration buildplate holder","description":"\u003ch2\u003eRead first, then print\u003c\/h2\u003e\u003ch3\u003eplease \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/2089038-fnt-system-for-storage-your-build-plates#profileId-2258032\"\u003eread this article\u003c\/a\u003e, which explains the structure of the FNT model family and details the compatibility of each version with different 3D printers.\u003c\/h3\u003e\u003ch2 style=\"text-align: center\"\u003e \u003c\/h2\u003e\u003cp style=\"text-align: center\"\u003eIf you have a P2S printer, you are probably wondering if the \u003cstrong\u003efeet plate storage under X1\/P1\u003c\/strong\u003e is compatible with the P2S version. \u003cstrong\u003eThe P2S has different dimensions than the X1\/P1\u003c\/strong\u003e. P2S version is published \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/2027379-fnt-p2s-plate-storage-base#profileId-2186654\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\u003cp style=\"text-align: center\"\u003e \u003c\/p\u003e\u003ch2 style=\"text-align: center\"\u003eFNT X1 Base Anti-Vibration buildplate holder\u003c\/h2\u003e\u003cp style=\"text-align: center\"\u003e(FNT X1\/P1 Base Anti-Vibration feet buildplate storage holder for 4, 6 or 8 plates)\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eUpdate: 2.11.2025\u003c\/p\u003e\u003cp\u003eMaker \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/@budavari\"\u003ebudavari\u003c\/a\u003e had a great idea how to easily add a dust cover to the model. If you already have a \u003cstrong\u003eFNT Anti-Vibration feet plate storage under X1 model\u003c\/strong\u003e, don't hesitate to add this new cover to it. You can find the model to place on the plates holder among the printing profiles. Thank you for this idea!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 44.85%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-11-02_e2efebcbdb1ce8.jpg\"\u003e\u003cfigcaption\u003ePhoto by \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/@budavari\"\u003ebudavari\u003c\/a\u003e\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure class=\"image image_resized\" style=\"width: 44.1%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-11-02_f8fb18cbc86fd.jpg\"\u003e\u003cfigcaption\u003ePhotographed by \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/@budavari\"\u003ebudavari\u003c\/a\u003e\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-05-08_aaa0b1010d10c8.png\"\u003e\u003c\/figure\u003e\u003ch3\u003e \u003c\/h3\u003e\u003ch3\u003e\u003cstrong\u003eFNT X1 Base Anti-Vibration buildplate holder\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eAre you looking for a practical solution to organize the print plates for your X1\/P1 printer? The \u003cstrong\u003eFNT Anti-Vibration Feet Plate Storage\u003c\/strong\u003e is the perfect accessory, designed to save space while reducing noise and vibrations during printing. This holder is engineered to be sturdy, stable, and discreetly positioned under your printer, freeing up valuable desk space and ensuring quieter, more stable printing.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSave Space\u003c\/strong\u003e – Utilize the area beneath your printer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduce Vibrations\u003c\/strong\u003e \u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEasy Installation\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-05-08_4ba34e12b4b388.gif\"\u003e\u003c\/figure\u003e\u003cp\u003eThis version of the holder is specially designed as a base\/stand under X1\/P1 series printers. It's actually very simple - just place the printer on the assembled holder and you're done. Don't forget that for proper function you will need BambuLab Anti-Vibration Feet.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-05-08_7cabe66c241d88.gif\"\u003e\u003cfigcaption\u003eEasy to slide in \/ out\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-05-08_4f7b2514bdc848.gif\"\u003e\u003cfigcaption\u003eDouble vibration compensation\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003ePlease support my work if you like the model. Boosts invests in purchasing material for prototype models. Thank you. :-)\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003ch4\u003eDiscover the full \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/1227809-fnt-ams-plates-holder-for-x1-p1-plates-button-slim#profileId-1246011\"\u003e\u003cstrong\u003eFNT buildplates holder family\u003c\/strong\u003e \u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e and explore all the ways you can build your perfect setup.\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eThe FNT family includes:\u003c\/strong\u003e\u003cbr\u003e- AMS plates holders for 4, 6, or 8 build plates\u003cbr\u003e- “Stack” or standalone mountable holders for 4 or 8 plates\u003c\/p\u003e\u003cp\u003e-Anti-Vibration feet plate storage under X1\/P1\u003cbr\u003e- Customizable plate logos\u003cbr\u003e- TPU feet\u003cbr\u003e- Adapters for AMS Raisers\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003ca href=\"https:\/\/makerworld.com\/en\/models\/1227809-fnt-ams-plates-holder-for-x1-p1-plates-button-slim#profileId-1246011\" target=\"_blank\" rel=\"noopener noreferrer ugc\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-05-03_521e2701a36a58.jpg\"\u003e\u003c\/a\u003e\u003c\/figure\u003e\u003ch2\u003e\u003cstrong\u003eFNT Anti-Vibration feet plate storage under X1\/P1\u003c\/strong\u003e\u003c\/h2\u003e\u003ch3\u003eIntroduction\u003c\/h3\u003e\u003cp\u003eI have many build plates for both Prusa and Bambu printers and very limited space for storage. So I decided to create plates holder with eject button for easy insertion and removal.\u003c\/p\u003e\u003cp\u003eInserting and removing build plates goes very smoothly. There is no danger of the printing surface getting dirty from greasy fingers :-)\u003c\/p\u003e\u003cp\u003eBy pressing the button, the build plate ejects approximately 3 cm. By inserting the build plate, the button will pop out easily.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVertical placement\/sticking to the side of the printer also works great.\u003c\/strong\u003e\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-03-19_ba48cb78b4d168.gif\"\u003e\u003cfigcaption\u003eA demonstration of how the buildplate extension works on the FNT family holder\u003c\/figcaption\u003e\u003c\/figure\u003e\u003ch4\u003eWhat non-pressing parts will you need?\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAnti-Vibration Feet \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/eu.store.bambulab.com\/products\/anti-vibration-feet\"\u003ehttps:\/\/eu.store.bambulab.com\/products\/anti-vibration-feet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e6 pieces of M4 nuts\u003c\/li\u003e\n\u003cli\u003e6 pieces of screws \u003cspan style=\"background-color: rgb(255,255,255); color: rgb(51,51,51); font-size: 16px\"\u003etype DIN7985 or simmilar\u003c\/span\u003e\u003cul\u003e\n\u003cli\u003eM4x16 type \u003cspan style=\"background-color: rgb(255,255,255); color: rgb(51,51,51); font-size: 16px\"\u003e(4-plates)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"background-color: rgb(255,255,255); color: rgb(51,51,51); font-size: 16px\"\u003eM4x25 (6-plates)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"background-color: rgb(255,255,255); color: rgb(51,51,51); font-size: 16px\"\u003eM4x30 (8-plates)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-05-08_ecc4061c31e508.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe holder contains several interesting solutions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInterchangeable labels on the sides. A simple click inserts the label, a hole on the other side allows it to be removed.\u003c\/li\u003e\n\u003cli\u003eNew anti-vibration feet and original printer's rubber feet are used. Overall, it is a double suspension. The printer is very stable and does not slip on the table. The build plates in the holder do not shake or make any other bad sounds.\u003c\/li\u003e\n\u003cli\u003eInserting and removing build plates goes very smoothly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-03-19_1418777ae4063.gif\"\u003e\u003c\/figure\u003e\u003ch3\u003ePrinting instructions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePlease use the included print profile. It is tuned and tested for optimal results\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003ePrint only on closed printers such as X1C, P1S, H2D\u003c\/li\u003e\n\u003cli\u003eBefore starting printing, make sure the build plate is clean and degreased. If necessary, use 3DLac.\u003c\/li\u003e\n\u003cli\u003eUse only good quality filament to avoid problems with peeling\/non-functional buttons due to poorly printed surfaces. Bambu PLA Basic is OK\u003c\/li\u003e\n\u003cli\u003eDo not increase the speed or change the height of the layer\u003c\/li\u003e\n\u003cli\u003elayer 0.2mm, supports: yes, use Brim\u003c\/li\u003e\n\u003cli\u003eI use Textured Pad 60°C and PLA. I have no problems printing on X1C.\u003c\/li\u003e\n\u003cli\u003eWhen I used SuperTack and the recommended 45°C, the model peeled off\u003c\/li\u003e\n\u003c\/ul\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-05-08_fe9f426622ba5.jpg\"\u003e\u003c\/figure\u003e\u003ch3\u003eAssembly:\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eFirst of all, please remove the top glass. When working, it is necessary to tilt the printer. This will prevent possible damage to the top glass. I also recommend vacuuming the printer. This is an ideal opportunity :-)\u003c\/li\u003e\n\u003cli\u003ePrint Holder body (Front, Back and side parts), buttons and arms of selected version\u003c\/li\u003e\n\u003cli\u003eSlide Front \/ Back parts into the Side parts\u003c\/li\u003e\n\u003cli\u003eInsert 2 pcs of M4 nuts into the holes\u003c\/li\u003e\n\u003cli\u003eUse M4x16 type DIN7985 or simmilar for fixing the holder body. Start with back side screws.\u003c\/li\u003e\n\u003cli\u003eUse the remaining nuts and bolts and assemble the bracket step by step. Tighten the bolts firmly.\u003c\/li\u003e\n\u003cli\u003eInsert button to the holder. Slide in \/ out several times to clean slot and button bar from printing imperfections\u003c\/li\u003e\n\u003cli\u003eRotate Holder body\u003c\/li\u003e\n\u003cli\u003eAlign the button and arm teeth according to the picture. Push the arm into the holder firmly. First attach the upper arms (1 and 2), then the lower arms (3 and 4).\u003c\/li\u003e\n\u003cli\u003eTest whether the button and arm move easily\u003c\/li\u003e\n\u003cli\u003eRemove all 4 feets from your X1\/P1 printer \u003c\/li\u003e\n\u003cli\u003eInsert theese 4 original feets to the holes of the assembled FNT Anti-Vibration feet plate storage under X1\/P1\u003c\/li\u003e\n\u003cli\u003eInstall Anti-Vibration feet. When inserting the feets, you will need to turn them slightly to make sure they fit properly. Once this happens, press firmly to lock them in place.\u003c\/li\u003e\n\u003cli\u003eInstall your printer on the holder\u003c\/li\u003e\n\u003cli\u003eInstall logo plates\u003c\/li\u003e\n\u003c\/ol\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-05-08_0aa9a6ab822bc.gif\"\u003e\u003cfigcaption\u003eSlide Front \/ Back parts into the Side parts\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-05-08_775dacda198818.jpg\"\u003e\u003cfigcaption\u003eUse M4x16 type DIN7985 or simmilar for fixing the holder body. Start with back side screws.\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-05-08_0350c9b9f8d4e.jpg\"\u003e\u003cfigcaption\u003eUse the remaining nuts and bolts and assemble the bracket step by step. Tighten the bolts firmly.\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-03-19_c393faaea7ab6.gif\"\u003e\u003cfigcaption\u003eInsert button to the holder. Slide in \/ out several times to clean slot and button bar from printing imperfections\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-05-08_765889ec24062.gif\"\u003e\u003cfigcaption\u003eSlide in \/ out several times to clean slot and button bar from printing imperfections. If the buttons do not move easily, please use sandpaper to smooth the buttons.\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-05-08_aad3e2e1b6025.gif\"\u003e\u003cfigcaption\u003eAlign the button and arm teeth according to the picture. Push the arm into the holder firmly. Test whether the button and arm move easily\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-05-08_7fc57b8b522ab8.jpg\"\u003e\u003cfigcaption\u003eRemove all 4 feets from your X1\/P1 printer \u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-05-08_32fc790bcca788.jpg\"\u003e\u003cfigcaption\u003eInsert theese 4 original feets to the holes of the assembled FNT Anti-Vibration feet plate storage under X1\/P1\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-05-08_8f99c62c69ed9.jpg\"\u003e\u003cfigcaption\u003eInstall Anti-Vibration feet to the priinter. When inserting the feets, you will need to turn them slightly to make sure they fit properly. Once this happens, press firmly to lock them in place.\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-05-08_79c2120c4ba458.gif\"\u003e\u003cfigcaption\u003eInstall your printer on the holder\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-05-08_4c9d242828b148.gif\"\u003e\u003cfigcaption\u003eInstall logo plates\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003ch3\u003eX1\/P1 feets\u003c\/h3\u003e\u003cp\u003eIf you don't have X1\/P1 legs anymore, there's nothing easier than printing them out. He recommended TPU 90A, or a similar flexible material.\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-11-22_d4b72354424658.jpeg\"\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-11-22_2079305d6e823.jpeg\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch3\u003eDust Cover Addon\u003c\/h3\u003e\u003cp\u003eIf you already have the open version printed and decided need a cover, you can print it. The cover is sturdy enough and you just put it on the holder. You can glue it if you want, but it's not necessary. Use the dedicated print profile.\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-11-22_43d4cabc664e38.jpg\"\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-11-22_4986edf96f7398.jpg\"\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-11-22_0a3192ce45f858.jpeg\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch4\u003e \u003c\/h4\u003e\u003ch4\u003eAn emergency button \/ arm removal procedure\u003c\/h4\u003e\u003cp\u003eIf for any reason the arm or button needs to be removed, I am adding an emergency removal procedure. The removal should not damage the body of the holder, but the button and arm will likely be damaged.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-03-19_626e17dbc39d78.gif\"\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001396765\/design\/2025-03-19_abc25c8f9c36f8.gif\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eHappy printing!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesign by Frantisek23 on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67383325196592,"sku":null,"price":78.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0.publish_d8110f4c-2e7c-49c4-a7b7-409d243bc2dc.jpg?v=1784499855","url":"https:\/\/mymadmanlab.com\/products\/fnt-x1-base-anti-vibration-buildplate-holder","provider":"Mymadmanlab.com","version":"1.0","type":"link"}