{"product_id":"fnt-x1-stackable-for-ams-buildplate-holder","title":"FNT X1 Stackable for AMS buildplate holder","description":"\u003ch2\u003eRead first, then print\u003c\/h2\u003e\u003ch3\u003eplease \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/2089038-fnt-system-for-storage-your-build-plates#profileId-2258032\"\u003eread this article\u003c\/a\u003e, which explains the structure of the FNT model family and details the compatibility of each version with different 3D printers.\u003c\/h3\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2 style=\"text-align: center\"\u003eFNT X1 Stackable for AMS buildplate holder\u003c\/h2\u003e\u003cp style=\"text-align: center\"\u003e(FNT X1\/P1 Stackable for AMS buildplate holder with button)\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e logoplates with more numbers added.\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001271163\/design\/2025-04-07_ff82bf513feae8.png\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001271163\/design\/2025-03-31_fa76f805f5b3a.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003e\u003cstrong\u003eHello!\u003c\/strong\u003e\u003cbr\u003eFollowing the success of my original plate holder designed as a base for the AMS, I am excited to introduce the next step in modular storage: the \u003cstrong\u003eStackable \/ Standalone FNT buildplates holder\u003c\/strong\u003e, now joining the \u003cstrong\u003eFNT\u003c\/strong\u003e family. The Stackable holder is currently for 4 or 8 buildplates!\u003c\/p\u003e\u003cp\u003eWhether you're expanding your current setup with AMS FNT plates holder or starting fresh, this versatile holder offers multiple configuration options. Use it as an extension of the stackable system, as a standalone plate holder, or even mount it underneath a shelf — the choice is yours.\u003c\/p\u003e\u003cp\u003eHow many buildplates can you stack? Just try it!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001271163\/design\/2025-03-31_1105bf3776e4a.jpg\"\u003e\u003cfigcaption\u003eStack\/standalone version (front) vs. AMS version (back). The Stack verson is lower, it does not have the upper sheet, which is used to install the AMS\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDiscover the full \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/1227809-fnt-ams-plates-holder-for-x1-p1-plates-button-slim#profileId-1246011\"\u003e\u003cstrong\u003eFNT buildplates holder family\u003c\/strong\u003e \u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e and explore all the ways you can build your perfect setup. Here you will find other models and accessories that fit the holder.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001271163\/design\/2025-03-31_1117b778c098d.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eStackable \/ Standalone FNT buildplates holder for X1 P1 A1 with button\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eEfficient storage for your build plates — designed with usability in mind.\u003c\/strong\u003e\u003cbr\u003eManaging multiple build plates for \u003cstrong\u003eBambu\u003c\/strong\u003e printers can quickly become a challenge, especially when space is limited. To solve this, I designed a \u003cstrong\u003ededicated build plate holder with an integrated eject button\u003c\/strong\u003e, offering both practical functionality and a clean aesthetic.\u003c\/p\u003e\u003cp\u003eThe holder ensures \u003cstrong\u003esmooth insertion and removal\u003c\/strong\u003e of build plates, minimizing direct contact and reducing the risk of contaminating the print surface with fingerprints or oils.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEject button\u003c\/strong\u003e releases the build plate approximately 3 cm for easy access\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic release\u003c\/strong\u003e of the button when a plate is inserted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile mounting options\u003c\/strong\u003e — can be used vertically or attached to the side of your printer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001271163\/design\/2025-03-31_a5000c31d13d7.gif\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlexible stacking, your way:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEffortlessly stack using spacers\u003c\/li\u003e\n\u003cli\u003eSecure with 8x3mm neodymium magnets (4 for a firm hold, 8 for extra strength)\u003c\/li\u003e\n\u003cli\u003eBolt it directly to another holder for maximum stability\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSmart, modular and customizable, take your build plates to the next level of storage!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001271163\/design\/2025-03-31_d967341dc2292.gif\"\u003e\u003c\/figure\u003e\u003ch4\u003eWhat non 3D-printed parts will you need?\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e4 or 8 pieces of M4 nuts\u003c\/li\u003e\n\u003cli\u003e4 or 8 pieces of screws M4x16 (4-plates) or M4x30 (8-plates) type DIN7985 or simmilar (If you use countersunk screws, don't forget to use the included washers.)\u003c\/li\u003e\n\u003cli\u003eDepending on the use, you will also need other parts.\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparately placed holder\u003c\/strong\u003e - I recommend non-slip pads\u003cul\u003e\n\u003cli\u003eSilicone - round up to 12x3.5 mm\u003c\/li\u003e\n\u003cli\u003eFoam\/rubber - round up to 22x2.5 mm\u003c\/li\u003e\n\u003cli\u003eTPU printed pads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStacked holder to the \u003c\/strong\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/1227809-fnt-ams-plates-holder-for-x1-p1-plates-button-slim#profileId-1246011\"\u003e\u003cstrong\u003eFNT AMS holder\u003c\/strong\u003e\u003c\/a\u003e\u003cul\u003e\n\u003cli\u003estack using spacers (printed in profile)\u003c\/li\u003e\n\u003cli\u003e8x3mm neodymium magnets + glue (4 for a firm hold, 8 for extra strength) You'll need double the amount of magnets if the counterpart doesn't have any installed. I recommend sticking the magnets to the holder with a suitable adhesive so that they hold better. Pay attention to the correct polarity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolder under the shelf\u003c\/strong\u003e\u003cul\u003e\u003cli\u003e4 pcs of wood screws (max. 4 mm in diameter) with a length suitable for the selected holder\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe holder offers several smart features designed for flexibility and convenience:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterchangeable side labels\u003c\/strong\u003e – Labels can be easily clicked into place, and removed via a small hole on the opposite side. A customizable template is included (LogoPlate.step), allowing you to add your own image or text.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional underside mounting\u003c\/strong\u003e – If you don't wish to use it as a stand for AMS, you can attach it under a table or shelf using the pre-drilled holes and standard screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated side handles\u003c\/strong\u003e (AMS version only)– For comfortable and easy carrying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 mounting points for anti-slip pads\u003c\/strong\u003e – Located on the bottom for added stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 slots for neodymium magnets (8x3 mm)\u003c\/strong\u003e – For secure, magnetic stacking or mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLabeled parts for easy orientation\u003c\/strong\u003e – All parts are clearly marked to make printing and assembly more straightforward.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001271163\/design\/2025-03-31_440a09abf30c38.gif\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠️ Important Safety Warning:\u003c\/strong\u003e\u003cbr\u003eIf you plan to use theholder on top of the printer, make sure to apply \u003cstrong\u003enon-slip rubber feet\u003c\/strong\u003e. Dust on the glass surface can significantly reduce grip, and the printer's movement may cause the holder to slide, leading to a potential accident.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo not leave the printer unattended\u003c\/strong\u003e until you’ve confirmed that the holder stable and the stand stays firmly in place during operation.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001271163\/design\/2025-03-31_551bf1ca7cd8e8.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePrinting Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTo achieve the best possible results, please follow these guidelines:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse the included print profile\u003c\/strong\u003e – It has been thoroughly tuned and tested for optimal performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinter requirements\u003c\/strong\u003e – This model is intended for closed printers such as the \u003cstrong\u003eBambu X1C\u003c\/strong\u003e or \u003cstrong\u003eP1S\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild plate preparation\u003c\/strong\u003e – Make sure the plate is \u003cstrong\u003eclean and degreased\u003c\/strong\u003e with IPA before printing. If there's any risk of the model lifting, apply a bit of \u003cstrong\u003e3DLac in the corners\u003c\/strong\u003e of the build plate. I’ve had \u003cstrong\u003eno issues with textured build plates\u003c\/strong\u003e when following these steps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilament quality matters\u003c\/strong\u003e – \u003cstrong\u003eDon't use low-quality filament\u003c\/strong\u003e to prevent warping or non-functional button mechanisms caused by poor layer adhesion. \u003cstrong\u003eBambu PLA Basic\u003c\/strong\u003e works well.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint settings\u003c\/strong\u003e:\u003cul\u003e\n\u003cli\u003eLayer height: \u003cstrong\u003e0.2 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrim\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed\/layer height\u003c\/strong\u003e: Do not modify – follow the provided profile for best fit and function\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface \u0026amp; temperature\u003c\/strong\u003e – I personally use a \u003cstrong\u003etextured build plate at 60 °C\u003c\/strong\u003e with \u003cstrong\u003ePLA\u003c\/strong\u003e on a \u003cstrong\u003eBambu X1C\u003c\/strong\u003e, and it works flawlessly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarning\u003c\/strong\u003e – When using \u003cstrong\u003eSuperTack\u003c\/strong\u003e at the recommended 45 °C, I experienced warping\/peeling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e🧩 Assembly Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint the required parts\u003c\/strong\u003e (based on the selected version)\u003cstrong\u003e:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHolder body components: \u003cstrong\u003eFront, Back, Left + Right\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eButtons\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eArms\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001271163\/design\/2025-03-31_7e763799603e48.gif\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssemble the holder body:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eSlide the \u003cstrong\u003eLeft\u003c\/strong\u003e part into the \u003cstrong\u003eFront\u003c\/strong\u003e and \u003cstrong\u003eBack\u003c\/strong\u003e parts.\u003c\/li\u003e\n\u003cli\u003eSlide the \u003cstrong\u003eRight\u003c\/strong\u003e part into the \u003cstrong\u003eFront\u003c\/strong\u003e and \u003cstrong\u003eBack\u003c\/strong\u003e parts to form the body.\u003c\/li\u003e\n\u003cli\u003eInsert \u003cstrong\u003eat least 4 M4 nuts\u003c\/strong\u003e into the corner slots.\u003c\/li\u003e\n\u003cli\u003eUse \u003cstrong\u003eM4 screws (DIN 7985 or similar)\u003c\/strong\u003e to securely fix the body together.\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall the button:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eInsert the button into its slot.\u003c\/li\u003e\n\u003cli\u003eSlide it in and out several times to smooth out any printing imperfections in the slot or button bar.\u003c\/li\u003e\n\u003cli\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001271163\/design\/2025-03-31_181a07b7771da.gif\"\u003e\u003c\/figure\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttach the arms:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eRotate the holder body to access the mounting points.\u003c\/li\u003e\n\u003cli\u003eAlign the \u003cstrong\u003ebutton teeth\u003c\/strong\u003e and \u003cstrong\u003earm teeth\u003c\/strong\u003e as shown in the reference image.\u003c\/li\u003e\n\u003cli\u003eFirmly push the arms into the holder.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall the upper arms first\u003c\/strong\u003e (positions 1 and 2), then \u003cstrong\u003ethe lower arms\u003c\/strong\u003e (3 and 4).\u003c\/li\u003e\n\u003cli\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001271163\/design\/2025-03-31_c8c4c60b4ecf48.gif\"\u003e\u003c\/figure\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest the mechanism:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eMake sure the button and arms \u003cstrong\u003emove freely and smoothly\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001271163\/design\/2025-03-31_e69f152bbd9b7.gif\"\u003e\u003c\/figure\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd finishing touches:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eInsert the \u003cstrong\u003elabels\u003c\/strong\u003e into the designated slots.\u003c\/li\u003e\n\u003cli\u003eMount the holder wherever suits your setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001271163\/design\/2025-03-31_0c1ba5cf701928.gif\"\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001271163\/design\/2025-03-31_592ca5490b9028.gif\"\u003e\u003c\/figure\u003e\u003cp\u003e\u003cstrong\u003e🛠️ Emergency Button \/ Arm Removal Procedure\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn case the \u003cstrong\u003ebutton or arm needs to be removed\u003c\/strong\u003e after full assembly, the following emergency procedure can be used.\u003c\/p\u003e\u003cp\u003ePlease note:\u003cbr\u003eThis method is designed to allow removal \u003cstrong\u003ewithout damaging the main body\u003c\/strong\u003e of the holder. However, \u003cstrong\u003ethe button and\/or arm may be damaged\u003c\/strong\u003e in the process and might require reprinting.\u003c\/p\u003e\u003cp\u003eProceed with care, and only use this option if standard disassembly is not possible.\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001271163\/design\/2025-03-19_626e17dbc39d78.gif\"\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000001271163\/design\/2025-03-19_abc25c8f9c36f8.gif\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eHappy printing!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesign by Frantisek23 on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67383315104048,"sku":null,"price":88.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0.publish_e3ab3fc5-e406-4cfe-b679-991e6b302955.jpg?v=1784498996","url":"https:\/\/mymadmanlab.com\/products\/fnt-x1-stackable-for-ams-buildplate-holder","provider":"Mymadmanlab.com","version":"1.0","type":"link"}