{"product_id":"gen2-slim-drawers-updated","title":"GEN2 Slim Drawers (Updated)","description":"\u003cfigure class=\"image image-style-side\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000639139\/design\/a200df09-ff4a-432c-916b-c30e0320d08c\"\u003e\u003c\/figure\u003e\u003cp style=\"text-align: justify\"\u003eA new generation of the popular \u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/model\/17762-lack-enclosure-drawers\" rel=\"nofollow noopener\"\u003e\u003cstrong\u003eLack Enclosure Drawers\u003c\/strong\u003e\u003c\/a\u003e. The Gen2 Slim Lack Enclosure Drawers are part of the \u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/social\/5751-jerrari\/collections\/201196\" rel=\"nofollow noopener\"\u003e\u003cstrong\u003eGEN2 Modular Storage System\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e \u003c\/strong\u003eI designed which features a simplified installation method that allows you to rearrange and customize layouts in minutes. \u003cstrong\u003eThese slim drawers are half the height of a standard Gen2 drawer. Stacking 2 drawers achieves the\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e\u003cstrong\u003e height of 1 standard Gen2 Drawer. \u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e \u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e \u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e \u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e \u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003eOriginally designed for the \u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/model\/17-original-prusa-i3-mk3-enclosure-ikea-lack-table-pr\" rel=\"nofollow noopener\"\u003e\u003cstrong\u003e“Original Prusa i3 MK3 ENCLOSURE…\"\u003c\/strong\u003e\u003c\/a\u003e, The Lack drawers have found their way on to many desks, workbenches, and other tables as well. Now with the Gen2's rail design you can quickly swap the storage units between work areas.\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003c\/figure\u003e\u003cfigure class=\"media\"\u003e\u003coembed url=\"https:\/\/youtu.be\/b8jgTIv3ctQ\"\u003e\u003c\/oembed\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cfigure class=\"table\" style=\"height: 256.625px; width: 714px\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\u003ctd style=\"background-color: rgb(250, 104, 49); border: 1px solid rgb(191, 191, 191); padding: 0.4em; text-align: center\" colspan=\"2\"\u003e\u003cstrong\u003eUPDATES\u003c\/strong\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(191, 191, 191); padding: 0.4em\"\u003e\u003cfigure class=\"image image_resized\" style=\"width: 252.337px\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000639139\/design\/ec930996-8cbc-42a8-97f7-204c57bfd41c.webp\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(191, 191, 191); padding: 0.4em\"\u003e\n\u003cp\u003e10\/11\/2023\u003cbr\u003eTool insert holders designed to fit some of the most common 3D printer tools and accessories\u003c\/p\u003e\n\u003cfigure class=\"image image_resized image-style-align-left\" style=\"width: 174.775px\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000639139\/design\/44e7827c-a77b-4bf9-8c8c-7bc08bb63291.webp\"\u003e\u003c\/figure\u003e\u003cp\u003e\u003cstrong\u003eGEN2 Tool Organizer Inserts\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eBy \u003c\/strong\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/@MrPresident\" rel=\"nofollow noopener\"\u003e\u003cstrong\u003eMr.President\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/model\/602636-gen2-tool-organizer-inserts-for-prusa-mk4\/files\" rel=\"nofollow noopener\"\u003e\u003cstrong\u003eDownload HERE\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/figure\u003e\u003cp style=\"text-align: justify\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e• Gen2 rails allowing quick and easier swap-ability and combinations of many Gen2 Storage System designs.\u003cbr\u003e• Lack Drawers also include optional slots for magnets allowing drawers to snap into place with a nice \"Click\".\u003cbr\u003e• Drawer stoppers keep your drawers from attacking your feet.\u003cbr\u003e• Designed for larger and easier to install wood screws over the original lack enclosure drawer design.\u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e \u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e\u003cstrong\u003eHARDWARE\u003c\/strong\u003e\u003cbr\u003e• Screwdriver\u003cbr\u003e• Countersunk woodscrews: (Metric: \u003ca target=\"_blank\" href=\"https:\/\/www.ikea.com\/us\/en\/p\/fixa-200-piece-wood-screw-set-70224228\/\" rel=\"nofollow noopener\"\u003e4x25mm to 4x16mm\u003c\/a\u003e) or (SAE: #6 or #8 up to 1\" long)\u003cbr\u003e• Drill bit that is smaller diameter than the wood screws\u003cbr\u003e• Pen, Marker, or \u003ca target=\"_blank\" href=\"https:\/\/www.amazon.com\/TEKTON-65731-Scratch-Punch-Awl\/dp\/B01BBLPPJW\/ref=sr_1_3?keywords=Center+Punches+tekton\u0026amp;qid=1656263175\u0026amp;s=power-hand-tools\u0026amp;sr=1-3\" rel=\"nofollow noopener\"\u003eScratch Awl\u003c\/a\u003e\u003cbr\u003e• Magnets \u003ci\u003e(Optional)\u003c\/i\u003e: \u003ca target=\"_blank\" href=\"https:\/\/www.amazon.com\/gp\/product\/B07KPX36YX\/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8\u0026amp;psc=1\" rel=\"nofollow noopener\"\u003e10x5x2mm\u003c\/a\u003e or \u003ca target=\"_blank\" href=\"https:\/\/www.amazon.com\/gp\/product\/B07CNBSMDZ\/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8\u0026amp;psc=1\" rel=\"nofollow noopener\"\u003e10x2mm\u003c\/a\u003e\u003cbr\u003e• M3 nuts\u003cbr\u003e• M3 Screws M3x6 - M3x10\u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e \u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e \u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e\u003cstrong\u003eINSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e \u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e • With a marker or pen use the GEN2-QL rail, or Standard rail, to mark the hole locations on the surface you are mounting.\u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e• Drill out marked locations using a drill bit smaller than the diameter of the wood screw you will be using.\u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e \u003c\/p\u003e\u003cfigure class=\"image image_resized image-style-align-left\" style=\"width: 299.663px\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000639139\/design\/7838fa75-7b81-4208-98ec-a5d8fa0c0b09.png\"\u003e\u003c\/figure\u003e\u003cp style=\"text-align: justify\"\u003e• Prep the rail for installation by installing M3 nuts into the hexagonal holes. You can use a M3 screw to position and tighten the nut in place.\u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e• Install the rail using wood screws, use at least 4 screws on the outer corners to mount the single rail and and 6 to mount the double rail. (extra screw holes are available if you plan to stack more than 2 rows of drawers or contents of heavier than normal weight.)\u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e• Prep the drawer case for installation:\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000639139\/design\/70b3138c-07a6-43e3-ae27-1fc963a34784.gif\"\u003e\u003c\/figure\u003e\u003cp style=\"text-align: justify\"\u003e• Install \u003cstrong\u003eGEN2-QL (QuickLock Mechanisms)\u003c\/strong\u003e into the drawer case, if applicable. These will allow you to quickly lock and unlock drawers without the need to screw them in place with a rail lock.\u003c\/p\u003e\u003cfigure class=\"image image_resized image-style-align-center\" style=\"width: 535.5px\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000639139\/design\/2f8fa304-7a31-412c-ad55-c17a45b5e9aa.webp\"\u003e\u003c\/figure\u003e\u003cp style=\"text-align: justify\"\u003e- Install optional magnets if desired \u003cbr\u003eNOTE: you only need to install at least one magnet, you can choose to install 2 stacked if you want more magnetism between the case and the drawer. Pay attention to polarity, they can be corrected later if needed.\u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 535.5px\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000639139\/design\/c3956c9e-0d89-442d-b813-db88b584cbd5.webp\"\u003e\u003c\/figure\u003e\u003cp style=\"text-align: justify\"\u003e- Install optional nuts in drawer case (these are only used if you are installing a shorter drawer beneath this drawer case.\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000639139\/design\/bb364b6c-b696-471b-a518-456f42e3bc61.png\"\u003e\u003c\/figure\u003e\u003cp style=\"text-align: justify\"\u003e- Install optional drawer stops by pressing them into place as they are friction fit. Pay attention to the orientation, notch facing down and towards the front to pass through the slot. The one labeled “L” goes on the left side of the case and “R” on the right side. (While facing the front of the case)\u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e• Slide the case into position until it either stops or lines up with the front of the rail. (If you feel any resistance you might need to clean up and plastic imperfections around the male or female rails. \u003c\/p\u003e\u003cfigure class=\"image image_resized image-style-align-left\" style=\"width: 357px\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000639139\/design\/47b209bc-0c7c-4935-bc96-c70d7f6eb4e9.png\"\u003e\u003c\/figure\u003e\u003cp style=\"text-align: justify\"\u003e• Slide a rail lock into the rail found on the backside of the drawer case, slide all the way to the top until it buts up against the hole in the rail that contains the nut. Screw in place using a M3x8 or M3x10.\u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e• Prep the drawer, install the optional magnet, pay attention to the polarity. (If you need to remove the magnet you can use another magnet to pull it out of place or use a small Allen wrench or paper clip inserted into the hole below it.)\u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e• Insert the drawer by tilting in back when installing in order to pass by the drawer stopper notches. The drawer should now slide into place.\u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e• I guess you're all done unless you want to make more drawers :)\u003c\/p\u003e\u003ch4 style=\"text-align: justify\"\u003e \u003c\/h4\u003e\u003ch4 style=\"text-align: justify\"\u003e \u003c\/h4\u003e\u003ch4 style=\"text-align: justify\"\u003e\u003cstrong\u003eInstalling Drawers under each other\u003c\/strong\u003e\u003c\/h4\u003e\u003cfigure class=\"image image_resized image-style-align-left\" style=\"width: 357px\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000639139\/design\/1e8ddcdb-b6b9-4041-b27e-99f52d6947f4.webp\"\u003e\u003c\/figure\u003e\u003cp style=\"text-align: justify\"\u003e• This is the same process as above but instead of mounting the \"Rail Lock\" into the nut on the rail you will need to slide a “Rail Lock Upper” into place on the back of the case above or if installing a shorter drawer line up with the hole in the case above it.\u003cbr\u003eNOTE: You can only install the same length or smaller drawer case under each drawer case.\u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e \u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e \u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e \u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e \u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e \u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e \u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e\u003cstrong\u003eRECOMMENDED PRINT SETTINGS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003eFilament: PLA (PETG or ABS for heavier duty storage)\u003cbr\u003eNozzle Size: 0.4mm\u003cbr\u003ePrint Height: 0.2-0.35mm\u003cbr\u003eInfill: 10-20%\u003c\/p\u003e\u003cp style=\"text-align: justify\"\u003e \u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000639139\/design\/6b5b7f69-56df-4d8b-a54b-cd89635bbd72.webp\"\u003e\u003c\/figure\u003e\u003cfigure class=\"table\" style=\"width: 714px\"\u003e\u003ctable style=\"border: 1px double rgb(179, 179, 179)\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\u003ctd style=\"background-color: rgb(250, 104, 49); border: 1px solid rgb(191, 191, 191); padding: 0.4em; text-align: center\" colspan=\"2\"\u003e\u003ch3\u003e\u003cstrong\u003eGEN2 COMPATIBLE PRINTS\u003c\/strong\u003e\u003c\/h3\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(191, 191, 191); padding: 0.4em; text-align: center\"\u003e\n\u003ch4\u003e\u003cstrong\u003eGen2 Open Bin Lack Drawers\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/makerworld.com\/en\/models\/46559#profileId-48360\" rel=\"nofollow noopener\"\u003eDownload HERE\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(191, 191, 191); padding: 0.4em\"\u003e\u003cfigure class=\"image image_resized image-style-align-center\" style=\"width: 257.25px\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000639139\/design\/48ff3bb1-36dd-450a-b5b4-e9a8f405cdec.webp\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(191, 191, 191); padding: 0.4em; text-align: center\"\u003e\n\u003ch4\u003e\u003cstrong\u003eGen2 Gridfinity Drawers\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/makerworld.com\/en\/models\/25178#profileId-21941\" rel=\"nofollow noopener\"\u003eDownload HERE\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(191, 191, 191); padding: 0.4em\"\u003e\u003cfigure class=\"image image_resized image-style-align-center\" style=\"width: 257.25px\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000639139\/design\/cb867214-2a52-4bbe-87af-1d97ee29389c.webp\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(191, 191, 191); padding: 0.4em; text-align: center\"\u003e\n\u003ch4\u003e\u003cstrong\u003eGen2 Parts Drawers\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/makerworld.com\/en\/models\/117107#profileId-125930\" rel=\"nofollow noopener\"\u003eDownload HERE\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(191, 191, 191); padding: 0.4em\"\u003e\u003cfigure class=\"image image_resized image-style-align-center\" style=\"width: 257.25px\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000639139\/design\/0461e4b7-0795-4a7d-955d-77d24ae7a84e.webp\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(191, 191, 191); padding: 0.4em; text-align: center; width: 356.6px\"\u003e \u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(191, 191, 191); padding: 0.4em\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(191, 191, 191); padding: 0.4em; text-align: center\"\u003e\n\u003ch4\u003e\u003cstrong\u003eGen2 Modular Lack Enclosure Drawers\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/makerworld.com\/en\/models\/22666#profileId-20574\" rel=\"nofollow noopener\"\u003eDownload HERE\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(191, 191, 191); padding: 0.4em\"\u003e\u003cfigure class=\"image image_resized\" style=\"width: 257.25px\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000639139\/design\/14be01d6-12ba-4a13-b1f4-1e5fcc7b5f8f.webp\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(191, 191, 191); padding: 0.4em; text-align: center\"\u003e\n\u003ch4\u003e\u003cstrong\u003eGen2 Modular Tilt Drawers\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/makerworld.com\/en\/models\/23143#profileId-20903\" rel=\"nofollow noopener\"\u003eDownload HERE\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(191, 191, 191); padding: 0.4em\"\u003e\u003cfigure class=\"image image_resized image-style-align-center\" style=\"width: 257.25px\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000639139\/design\/c5790ddb-1df0-4fe8-ba27-f6d86c41fc1b.webp\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(191, 191, 191); padding: 0.4em; text-align: center\"\u003e \u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(191, 191, 191); padding: 0.4em\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid rgb(191, 191, 191); padding: 0.4em; text-align: center\"\u003e\n\u003ch4\u003e\u003cstrong\u003eGen2 Large Enclosure Bins\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003ca target=\"_blank\" href=\"https:\/\/makerworld.com\/en\/models\/56926#profileId-58605\" rel=\"nofollow noopener\"\u003eDownload HERE\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid rgb(191, 191, 191); padding: 0.4em\"\u003e\u003cfigure class=\"image image_resized image-style-align-center\" style=\"width: 257.25px\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000639139\/design\/ccf54f86-406d-40e8-8354-0c4b73302300.webp\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/figure\u003e\u003cp\u003e\u003cstrong\u003eSHARING THIS SYSTEM WITH THE EXPLICIT PERMISSION AND REQUEST OF \u003c\/strong\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/@Jerrari\" rel=\"nofollow noopener\"\u003e\u003cstrong\u003e@JERRARI\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e, THE ORIGINATOR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesign by Misterobots on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67414961455408,"sku":null,"price":105.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_dc28ce39-2c05-44b9-9dfb-e3646d191731.png?v=1785401810","url":"https:\/\/mymadmanlab.com\/products\/gen2-slim-drawers-updated","provider":"Mymadmanlab.com","version":"1.0","type":"link"}