{"product_id":"gridfinity-watch-stand-watches-with-large-bands","title":"Gridfinity Watch Stand - Watches with Large Bands","description":"\u003cp\u003e\u003cstrong\u003eUpdate 7\/29\/2025:  There is an updated version of this design, which adds a desiccant holder option (it is otherwise the same).  You can find that here:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/1629498-gridfinity-watch-stand-w-desiccant-holder-exlarge#profileId-1720813\"\u003e\u003cstrong\u003ehttps:\/\/makerworld.com\/en\/models\/1629498-gridfinity-watch-stand-w-desiccant-holder-exlarge#profileId-1720813\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 4th remix of \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.printables.com\/@LuochengHuan_1186191\"\u003eLuocheng Huang\u003c\/a\u003e's \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.printables.com\/model\/563681-gridfinity-watch-stand\"\u003eGridfinity Watch Stand\u003c\/a\u003e, which I modified to fit 1x2 and 3x2 Gridfinity Watch cases I designed. This new version is designed for larger watches, especially \u003cstrong\u003eones with thick bracelets.\u003c\/strong\u003e \u003cstrong\u003eFor most other watches, I recommend using the standard \u003c\/strong\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/578185\"\u003e\u003cstrong\u003eversion 3.0 watch holder\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e.  \u003c\/strong\u003eYou can also find the latest version of this design, which includes a desiccant holder at the link below:\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGridfinity \u003c\/strong\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/1203806-gridfinity-1x2-wide-watch-case-version-3-0#profileId-1217256\"\u003e\u003cstrong\u003eUpdated Single Watch Case\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e (for larger watches)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBig thanks to\u003c\/strong\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.printables.com\/@TommyStrobbe_826597\"\u003e\u003cstrong\u003e Tommy Strobbe \u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e(on Printables) for helping to improve this design. I used Tommy's feedback extensively to iterate the design, so that it could fit larger watches (larger watches than the original version 3.0 holders).\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThere are two versions of the base and TPU inserts included here. The regular versions have a notch which allows them to be used with my Gridfinity Watch cases - linked below. The “no-SUPPORTS” versions do not have the notch, and can be used as stand alone holders, but may not fit my cases.\u003c\/p\u003e\u003cp\u003eThe TPU inserts will need to be printed in a flexible material.\u003c\/p\u003e\u003cp\u003eA 3MF profile is included with one plate. The profile is set up with the following settings:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePLA (for the bases) and TPU (for the flexible inserts)\u003c\/li\u003e\n\u003cli\u003e0.4mm X1 Carbon profile\u003c\/li\u003e\n\u003cli\u003e3 Walls with 15% Gyroid infill\u003c\/li\u003e\n\u003cli\u003eArachne wall generator\u003c\/li\u003e\n\u003cli\u003eManual Supports are painted on the parts that need them.\u003c\/li\u003e\n\u003cli\u003eSmooth PEI build plate (use glue as a release agent when running TPU)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eI have several other 1x2 Gridfinity Watch Holder remixes, which can work with watches of most sizes, linked below:\u003c\/p\u003e\u003cfigure class=\"table\" style=\"width: 95.85%\"\u003e\u003ctable class=\"ck-table-resized\"\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width: 33.33%\"\u003e\n\u003ccol style=\"width: 33.33%\"\u003e\n\u003ccol style=\"width: 33.34%\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/578185-gridfinity-watch-stand-v3-0-for-larger-watches#profileId-498903\"\u003e\u003cstrong\u003eGridfinity Watch Stand v3.0 for Larger Watches\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(131,114,83)\"\u003eThis is the 3rd remix, and was the first to use a TPU cover, which really helped to better hold watches with fixed length bracelets.\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000625387\/design\/2025-09-02_ca1cfdf85d0148.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000625387\/design\/2025-09-02_8fa1b134504608.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/625387-gridfinity-watch-stand-watches-with-large-bands#profileId-549796\"\u003e\u003cstrong\u003eGridfinity Watch Stand - Watches with Large Bands\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(131,114,83)\"\u003eThis 4th remix was designed for larger watches, especially ones with thick bracelets.  It has the watch moved slightly forward, so watches with thick bands will fit the cases more easily.  It is otherwise very similar to the 3rd remix.\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000625387\/design\/2025-09-02_252e29bab6b66.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000625387\/design\/2025-09-02_959ba1d370229.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/1613938-gridfinity-watch-stand-with-desiccant-holder#profileId-1702837\"\u003e\u003cstrong\u003eGridfinity Watch Stand with Desiccant Holder\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(131,114,83)\"\u003eThe current version (5th remix), which includes three sizes of TPU covers (for small, medium and large watches), as well as a new compartment for holding desiccant, located in the center of the holder.  Each type of holder also now has a \"tab\" version, with a couple bumps which help support heavy watches (these can be seen in the pics).  This version should work for most folks, except those who have watches with very chunky bands (which the remix explained below is designed for). \u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000625387\/design\/2025-09-02_d59f8ce0cca37.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000625387\/design\/2025-09-02_8c5cc3f842998.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/1629498-gridfinity-watch-stand-w-desiccant-holder-exlarge#profileId-1720813\"\u003e\u003cstrong\u003eGridfinty Watch Stand with Desiccant Holder for Extra Large Watches\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(131,114,83)\"\u003eThis is an updated design to hold large watches with chunky bands.  It is similar to the above version, but moves the watch forward a bit (to make room for thick bands).  In the image, the holder was printed without the mesh screen for the desiccant, however it does have the same desiccant compartment as the holder shown above.  The watch by the way is an ADDIESDIVE Men's Diver's Watch (claimed to be 1000m), with a Seiko NH35 movement.  It's a good chunk of a watch, but also quite nice, with decent lume and a sapphire crystal.  \u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000625387\/design\/2025-09-02_d6ab0550787af.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000625387\/design\/2025-09-02_c51312f0777e38.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eIf you are interested in a watch case to use these with, you can find a few designs linked below for a 3x and 1x watch case:\u003c\/p\u003e\u003cfigure class=\"table\" style=\"width: 90.69%\"\u003e\u003ctable class=\"ck-table-resized\"\u003e\n\u003ccolgroup\u003e\n\u003ccol style=\"width: 33.33%\"\u003e\n\u003ccol style=\"width: 33.33%\"\u003e\n\u003ccol style=\"width: 33.34%\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/1203806-gridfinity-1x2-wide-watch-case-version-3-0#profileId-1217256\"\u003e\u003cstrong\u003eGridfinity 1x2 Wide Watch Case Version 3.0\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the newest single watch case, and has a TPU liner in the top and bottom of the case.  It is a bit larger than the earlier single watch case, linked below, but may offer better protection for larger watches with bracelets, thanks to the full TPU liner.  The inside width of this case is 52.7mm.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000625387\/design\/2025-09-02_b0413a1620a2b.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000625387\/design\/2025-09-02_57c03d055e151.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/475248-gridfinity-1x2-watch-case-version-2-1-12u#profileId-385984\"\u003e\u003cstrong\u003eGridfinity 1x2 Watch Case Version 2.1 (12U)\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the prior version of the single watch case, and is a bit smaller.  It only has a TPU liner in the top of the case.  With the TPU liner installed, this watch case is approximately 46.5mm in width, where the crown of a watch would typically sit.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000625387\/design\/2025-09-02_c052df3fb4364.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000625387\/design\/2025-09-02_cf4ad95f73e02.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/469749-gridfinity-3x2-watch-case-12u#profileId-379182\"\u003e\u003cstrong\u003eGridfinity 3x2 Watch Case (12U)\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003eThis is a three watch case, which has a TPU liner in the top only.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000625387\/design\/2025-09-02_6f558751edaa8.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000625387\/design\/2025-09-02_a42d20803e06c.jpg\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOther stuff:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eIf you need some \u003cstrong\u003ebins for small parts\u003c\/strong\u003e, the following bins with covers are a good option to use with the Box For Stuff \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.printables.com\/model\/710154-gridfinity-box-for-stuff-bfs-20-bin-version-20\"\u003e20 bin \u003c\/a\u003eand \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.printables.com\/model\/719788-gridfinity-25-bin-box-for-stuff-version-20-unteste\"\u003e25 bin \u003c\/a\u003ecases (or other 6U tall cases):\u003c\/p\u003e\u003col\u003e\n\u003cli\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/237116#profileId-253187\"\u003e\u003cstrong\u003e1 compartment 2x1 (3U, 6U, 9U) bin with a magnet pickup tool\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/416342\"\u003e\u003cstrong\u003e1x1, 1x2 (3 Compartment) and 1x4 (6Compartment) bins with lids (6U) - version 2.1\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/589616\"\u003e\u003cstrong\u003e\u003cu\u003e1x2, 1x3 and 1x4 single compartment bins with tabbed lids (3U, 6U and 9U) - version 2.1\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/405008\"\u003e\u003cstrong\u003e1x2, 1x3, 1x4 (6U, 9U and 12U) Lidded Bin for Stuff with Latch Version 2.0\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/405004\"\u003e\u003cstrong\u003e2x2, 2x3, 2x4 (6U, 9U and 12U) Lidded Bin for Stuff with Latch Version 2.0\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/405013\"\u003e\u003cstrong\u003e3x3, 3x4 (6U, 9U and 12U) Lidded Bin for Stuff with Latch Version 2.0\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/443705\"\u003e\u003cstrong\u003e4x4, 4x5 (6U, 9U and 12U) Lidded Bin for Stuff with Latch Version 2.0\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eIf you want to check out my other\u003cstrong\u003e Gridfinity cases\u003c\/strong\u003e, you can find them at the links below:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eGridfinity Box For Stuff \u003c\/strong\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/159840#profileId-266789\"\u003e\u003cstrong\u003e20 bin (6U)\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGridfinity Box For Stuff \u003c\/strong\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.printables.com\/model\/719788-gridfinity-25-bin-box-for-stuff-version-20-unteste\"\u003e\u003cstrong\u003e25 bin (6U)\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e (max size for a Bambu X1C\/P1S)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGridfinity Box For Stuff \u003c\/strong\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/386034#profileId-286398\"\u003e\u003cstrong\u003e16 bin (6U)\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e (Ender 3 size)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGridfinity Box For Stuff \u003c\/strong\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/386041#profileId-286401\"\u003e\u003cstrong\u003e16 bin - 12U deep version\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e (Ender 3 size)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGridfinity Box For Stuff \u003c\/strong\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/389651\"\u003e\u003cstrong\u003e2 bin (6U)\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e (small test version)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGridfinity \u003c\/strong\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/475248\"\u003e\u003cstrong\u003eSingle Watch Case\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGridfinity \u003c\/strong\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/469749\"\u003e\u003cstrong\u003eTriple Watch Case \u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGridfinity \u003c\/strong\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/1203806-gridfinity-1x2-wide-watch-case-version-3-0#profileId-1217256\"\u003e\u003cstrong\u003eUpdated Single Watch Case\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e (for larger watches)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eThanks for supporting my work!\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThanks and Acknowledgements: \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe models here could not have been made without the work of \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.youtube.com\/@ZackFreedman\"\u003eZach Freedman\u003c\/a\u003e, who introduced the world to Gridfinity, and then set it free for everyone to use.  These models are not based on direct remixing of Zach' original models, but they are fully compatible, and use the same, or a similar specification for the bin bases, bin lips and base grids, which Zach Freedman developed.   Zach Freedman's work is available on \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/thangs.com\/designer\/ZackFreedman\"\u003eThangs, \u003c\/a\u003eand you can find examples of his Gridfinity designs \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/thangs.com\/designer\/ZackFreedman\/3d-model\/Gridfinity%20Caliper%20Holder-62216\"\u003ehere\u003c\/a\u003e and \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/thangs.com\/designer\/ZackFreedman\/3d-model\/Gridfinity%20Baseplates-60925\"\u003ehere\u003c\/a\u003e, which are available under his MIT license.  If you like this model, or want to learn more about Gridfinity, you can check out Zach Freedman's \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.youtube.com\/@ZackFreedman\"\u003eYouTube\u003c\/a\u003e, or \u003cstrong\u003eyou can support\u003c\/strong\u003e \u003cstrong\u003eZach Freedman's work on Patreon (\u003c\/strong\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.patreon.com\/zackfreedman\/\"\u003e\u003cstrong\u003epatreon.com\/zackfreedman\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e).\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAnd Finally,\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYou can find the other things I'm working on at my blog \u003c\/strong\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.mystoopidstuff.com\/blog\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e. You can also follow me \u003c\/strong\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/@mystoopidstuff\"\u003e\u003cstrong\u003ehere \u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003eor on \u003c\/strong\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.printables.com\/@MyStoopidStuff\"\u003e\u003cstrong\u003ePrintables\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e to see what new stuff I post. If you would like to support my work, you can Buy Me A Coffee using this link:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.buymeacoffee.com\/mystoopidstuff\"\u003e\u003cstrong\u003ehttps:\/\/www.buymeacoffee.com\/mystoopidstuff\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThanks for looking!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eChangelog:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e9\/5\/2024: \u003c\/strong\u003eImported design from Printables.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e4\/14\/2025: \u003c\/strong\u003eAdded some untested watch holders which are pending testing.  These are updated to work with changes which will be added to the 1x2 Gridfinity watch cases soon.  The new files are not available in a 3mf profile at this time, but can be found with the STL's (they are in the folder named “New Design - Pending Testing 4-14-2025”).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e12\/26\/2025: \u003c\/strong\u003e Added some optional TPU bumper models in the files \u0026gt; folder “Optional Bumpers”.\u003c\/p\u003e\u003cp\u003eDesign by mystoopidstuff on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368021033264,"sku":null,"price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_919ff2cd-16a0-43e1-a221-847656bf1e54.jpg?v=1784019949","url":"https:\/\/mymadmanlab.com\/products\/gridfinity-watch-stand-watches-with-large-bands","provider":"Mymadmanlab.com","version":"1.0","type":"link"}