Headphone rack for french cleat

UPDATE 2024-05-24 - Removed the 2 piece version since it keeps slipping

---

I designed it for usage on a french cleat with a depth of 15mm with the 3M foldable earmuffs in mind.

Printing

You should be able to print it without support on its side. The one in the picture is the old version which did require support. I've printed it with regular PLA, 3 wall layers and an infill of 25% and I haven't had any problems so far.

Remixing

The model was made with OnShape and should be available to all https://cad.onshape.com/documents/5d6f040f905bc86da2ecab88/w/341c4a905c907bbc0980aabd/e/5ed015b4b59539790ff9c9ae

The cleat configuration is in the first tab (on the bottom), the settings per model are in the part studio itself in a folder called variables.

Design by pat.vdleer on MakerWorld (license: BY-SA).