{"product_id":"heater-duct-for-p1s-x1c-chamber-heater-mod","title":"Heater Duct for P1S X1C Chamber heater mod","description":"\u003cp\u003eThis model is my addition to Ember Prototype's excellent heated chamber mod for the X1C here:\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cfigure class=\"media\"\u003e\u003coembed url=\"https:\/\/www.youtube.com\/watch?v=EuuyrffuF30\"\u003e\u003c\/oembed\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eWhen doing the same mod to my P1S, I noticed some slight deflection in the P1S's outer plastic panels happening, so I created this duct to sit on top of the space heater to deflect the heated air away from the outer panel (and away from the wall of the electronics bay).\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eYou may need to adjusting the mounting height of your heater to avoid the duct interfering with the screw boss for the AUX fan.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe model is pre-mouseeared for bed adhesion.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ePrint in an extremely heat resistant material like PA6-CF. The temperature I measured in the exhaust (below the grill of the heater) topped out around 140C. The duct I printed in PA6-CF and annealed has had no issue with being used to heat the chamber to 60C for extended periods.\u003c\/p\u003e\u003cp\u003eDesign by Pathian on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67417242272048,"sku":"MW-841026","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_8160f279-4de6-4a17-90db-e6e4f6c6bb57.png?v=1785437740","url":"https:\/\/mymadmanlab.com\/products\/heater-duct-for-p1s-x1c-chamber-heater-mod","provider":"Mymadmanlab.com","version":"1.0","type":"link"}