Heltec T114 Slim Pro Case
Heltec T114 Slim Pro Case
Disclosure: Some links on this page may be Amazon affiliate links. If you make a purchase through them, I may earn a small commission — at no extra cost to you. I only recommend gear I trust and use myself. Thanks for your support!
Description:
Custom case for the Heltec T114. No hardware needed unless you want to use the Baofeng style clip which requires M2.5 nuts or heat set inserts and M2.5x5mm screws. Here are links to the parts I used:
MakerNova Branded Gizont Antenna
Will not fit an antenna with bigger than 11mm base
I personally do not sell anything, but you can order these from a couple of sellers online. I am not affiliated with these stores and do not make any money from them.
I haven't had a chance to make a video for this one yet, so for now just use my other Heltec video for assembly instructions, it's almost exactly the same. You DO NOT need to remove the plastic screen and button cover in the T114.
Assembly Video:
Design by Alley Cat on MakerWorld (license: BY-SA).