{"product_id":"hextraction-tiles-set-b-flip-flop-secret-tiles","title":"Hextraction Tiles Set B Flip Flop + Secret tiles","description":"\u003cp\u003e\u003cspan style=\"background-color: rgb(36,36,36); color: rgb(214,214,214); font-size: 16px\"\u003e2025-02-10 update: I fixed the Secret Twozu 10mm flippers. I have not tested the 3\/8 version. Let me know if that one works.  \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"background-color: rgb(36,36,36); color: rgb(214,214,214); font-size: 16px\"\u003e2025-02-09 update: The print profile on this page has been updated with improved models of the Secret tiles\u003c\/span\u003e by the amazing \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/thangs.com\/designer\/NoStepOnDeez\"\u003eNoStepOnDeez\u003c\/a\u003e\u003cspan style=\"background-color: rgb(36,36,36); color: rgb(214,214,214); font-size: 16px\"\u003e. \u003c\/span\u003e\u003cbr\u003e \u003c\/p\u003e\u003cp style=\"text-align: center\"\u003e \u003c\/p\u003e\u003cp style=\"text-align: center\"\u003e\u003cstrong\u003e\u003cu\u003eTLDR:\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center\"\u003eHextraction is a FAN-TA-STIC game \u003cbr\u003ewhere \u003cstrong\u003ebeads fly through\u003c\/strong\u003e tiles that create a series of \u003cstrong\u003epaths and booby traps \u003c\/strong\u003e\u003cbr\u003ethat you and your opponents \u003cstrong\u003estrategically\u003c\/strong\u003e \u003cstrong\u003eplace\u003c\/strong\u003e to\u003cstrong\u003e get your ball in the end zone\u003c\/strong\u003e, \u003cbr\u003ewhile \u003cstrong\u003eblocking your opponents\u003c\/strong\u003e' balls.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eIf you are a happy Hextraction fan:\u003c\/u\u003e\u003c\/strong\u003e  I have more fun for you! Please look for the \"I want more tiles!\" section further down.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eIf you are new to Hextraction:\u003c\/u\u003e\u003c\/strong\u003e please start with the “\u003cu\u003eWhat is Hextraction?”\u003c\/u\u003e section below.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eWhat is Hextraction?\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHextraction is a FAN-TA-STIC game with so much action, traps, physics, effects and randomness that no two games are the same. Each turn you get to carefully place on \u003cu\u003eyour 3D printed board\u003c\/u\u003e one of your \u003cu\u003e3D printed tiles\u003c\/u\u003e from your hand of randomly picked tiles. You also get to launch a steel ball down a start ramp and frantically watch it fly through a series of tunnels and paths created by all of the hexagonal tiles laid out by all players. These paths can include traps, levers, jumps and even special effects that are all strategically placed to get your ball in the end zone (to win), while blocking your opponents' balls with devious tiles.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eWhat's best part? This game is \u003cu\u003efree to play\u003c\/u\u003e, \u003cu\u003efree to print\u003c\/u\u003e and will \u003cu\u003eforever keep improving\u003c\/u\u003e as designers keep coming with AWESOME ideas to make CRAZY tiles (\u003cu\u003ealso free to print)\u003c\/u\u003e that often flip the game on its head. This is all thanks to \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/thangs.com\/designer\/ZackFreedman\"\u003eZack Freedman\u003c\/a\u003e, who chose to offer his game to the crowds of 3D printing enthusiasts, and let players and designers contribute to this wonderful game.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\"Hextraction is an open-source game - you can download the files to print yourself, or find a pre-printed set to buy.”\u003c\/li\u003e\n\u003cli\u003e“Hextraction is a 3D-printable, modder-friendly board game designed by \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/thangs.com\/designer\/ZackFreedman\"\u003eZack Freedman\u003c\/a\u003e of Voidstar Lab.”\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTo get an idea of its potential and learn some rules \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.youtube.com\/watch?t=1296\u0026amp;v=Iqz7ZDdP25A\u0026amp;feature=youtu.be\"\u003ewatch the Hextraction video\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eTo play the game, you will need to:\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePrint the grid: look for the \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/477167#profileId-485116\"\u003e\u003cstrong\u003eHextraction Super Board Game: Grid for A1 mini \u0026amp; +\u003c\/strong\u003e\u003c\/a\u003e. It can be printed on the A1 mini or other printers with larger build plate. I recommend PETG to make your board very sturdy, but PLA work fine too. This grid has 27 slots, which means more fun!\u003c\/li\u003e\n\u003cli\u003ePrint the base: look for my \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/477165#profileId-388193\"\u003e\u003cstrong\u003e\u003cu\u003eHextraction Super Board Game: Base for A1 mini \u0026amp; +\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e.\u003c\/strong\u003e This includes all the structural parts that are specific to the grid with 27 slots from this page, such as the gutters that channel lost balls all the way to the bottom (that would otherwise fall through), On ramps, End zones, adjustable legs and accessories;\u003c\/li\u003e\n\u003cli\u003eCheck the Hextraction \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.playhextraction.com\/where-to-get\"\u003eGetting Started page.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLook at the Hextraction \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.playhextraction.com\/how-to-play\"\u003eOfficial rules\u003c\/a\u003e. If you'd like to play by yourself, look at the \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.playhextraction.com\/single-player-rules\"\u003esingle player rules\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eBuy \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/amzn.to\/3MqpN30\"\u003e10 mm steel balls\u003c\/a\u003e or 3\/8\" slingshot ammo. 50 of them seems like a good number for 3-4 people.\u003c\/li\u003e\n\u003cli\u003ePrint Hextraction game tiles, the more the better! Here are links to my favourites sets.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/477272#profileId-388319\"\u003e\u003cstrong\u003eHextraction Tile Set A - Super Starter Pack\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e:\u003c\/strong\u003e includes plenty of tiles to get your Hextraction games started, along with some very cool tiles that will give you an idea of what is possible with this game.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/fr\/models\/477254#profileId-388298\"\u003e\u003cstrong\u003eHextraction Tiles Set A - PETG parts\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e:\u003c\/strong\u003e since PETG parts need different printing requirements, I pooled all the PETG parts from set A into this file.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/477241#profileId-388278\"\u003e\u003cstrong\u003eHextraction Tiles Set B Flip Flop+Secret tiles\u003c\/strong\u003e\u003c\/a\u003e: with sets A and B you will have all the basic starter tiles recommended, and enough whacky tiles to show you how much talent and creativity went into designing such mischievous contraptions!\u003c\/li\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/477245#profileId-388286\"\u003e\u003cstrong\u003eHextraction Tiles Set C - Deviations\u003c\/strong\u003e\u003c\/a\u003e: spice up your games with randomness and a bit of malevolence.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/477278#profileId-388325\"\u003e\u003cstrong\u003eHextraction Tiles Set D - Traps!\u003c\/strong\u003e\u003c\/a\u003e : traps are very useful to slow your opponents down and tear apart  their sophisticated plans.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/556020#profileId-474765\"\u003e\u003cstrong\u003eHextraction Tiles Set E - Wild Tiles\u003c\/strong\u003e\u003c\/a\u003e: Hextraction tile creators are (thankfully) not selected by committees or review boards. Nope, if you let them loose, they come up with ingenious and\/or crazy ideas, the perfect recipe for exotic tiles with strange themes or effects.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/837189#profileId-782699\"\u003e\u003cstrong\u003eHextraction Tiles Set F Mega pack\u003c\/strong\u003e\u003c\/a\u003e:  if your games get slowed down by effects tiles, balance things out by adding regular tiles. And no regular does not mean boring. \u003c\/li\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/838151#profileId-783793\"\u003e\u003cstrong\u003eHextraction Tiles Set G Lucky Unlucky tiles\u003c\/strong\u003e\u003c\/a\u003e: Feeling lucky? With this set, you can test it out, or better yet, you can bestow bad luck upon your opponents. Feeling better now?\u003c\/li\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/fr\/models\/1144886-hextraction-tiles-set-h-tile-rail-golf#profileId-1147989\"\u003e\u003cstrong\u003eHextraction Tiles Set H - Tile rail + Golf\u003c\/strong\u003e\u003c\/a\u003e: if you thought Hextraction was fun, wait until you play the Skyrail tile, my absolute favorite tile. And those golf-themed are sweet.  \u003c\/li\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/fr\/models\/885253\"\u003e\u003cstrong\u003eHextraction Tiles Set I - Abuse of power\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e \u003c\/strong\u003e: some tiles have, or give too much power. Don't print this set. It will change your games for the worst. Or the best! Just depends on the point of view.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/fr\/models\/1161942-hextraction-tiles-set-j-bam\"\u003e\u003cstrong\u003eHextraction Tiles Set J - BAM!\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e \u003c\/strong\u003e:\u003cstrong\u003e \u003c\/strong\u003eyou slip, you explode, you burn, earth splits under your ball. That's what this set is about. And some good (and evil) magic.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cu\u003eI want even more tiles!\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHextraction Tiles Set B Flip Flop + Secret Click tiles\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThose tiles were gathered from Thangs designers \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/thangs.com\/designer\/ZackFreedman\"\u003eZack Freedman\u003c\/a\u003e and \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/thangs.com\/designer\/NoStepOnDeez\"\u003eNoStepOnDeez\u003c\/a\u003e). I tested them and organized plates so you can print them on the A1 mini. I added test plates in order to test and troubleshoot adhesion of the Secret Click lids on your build plates.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe Secret Click tiles are a new model made by \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/thangs.com\/designer\/NoStepOnDeez\"\u003eNoStepOnDeez\u003c\/a\u003e that resolves multiples issues by the original tiles and many attempts to fix them. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003ePrinting\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAll parts can be printed in PLA. \u003c\/li\u003e\n\u003cli\u003eTo reduce friction, the flippers for the \u003cstrong\u003eFlip Flop\u003c\/strong\u003e and \u003cstrong\u003eTwozu\u003c\/strong\u003e tiles can be printed in PETG (look for \u003ci\u003eHextraction Tiles Set B Flip Flop+Secret PETG\u003c\/i\u003e print profile). If you print the latter, skip the corresponding parts on the PLA print profile.\u003c\/li\u003e\n\u003cli\u003ePrinting flippers on a smooth plate will reduce friction as well.\u003c\/li\u003e\n\u003cli\u003eThe \u003cstrong\u003eSecret\u003c\/strong\u003e \u003cstrong\u003eLIDS\u003c\/strong\u003e \u003cstrong\u003eneed\u003c\/strong\u003e \u003cstrong\u003eto be printed on their\u003c\/strong\u003e \u003cstrong\u003eedge\u003c\/strong\u003e (thin), i.e. \u003cstrong\u003estanding up\u003c\/strong\u003e, unlike other tiles which lay flat (wide) on their bottoms. This requires good adhesion on the build plates: clean them (Dawn soap, warm water) and dry your filament. The first plate in the print profile has a single lid and base for testing the adhesion.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cfigure class=\"image image_resized\" style=\"width: 41%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000477241\/design\/2025-03-01_a3e6a90be1a49.jpeg\"\u003e\u003c\/figure\u003e\u003cfigure class=\"image image_resized\" style=\"width: 42.08%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000477241\/design\/2025-03-01_938ea204c0d3f.jpg\"\u003e\u003c\/figure\u003e\u003cul\u003e\u003cli\u003eYes, printing the \u003cstrong\u003eSecret Click\u003c\/strong\u003e lids on edge requires supports (green in the image below) and brim (blue in the image below). Both are easy to remove after printing. \u003c\/li\u003e\u003c\/ul\u003e\u003cfigure class=\"image image_resized\" style=\"width: 54.19%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000477241\/design\/2025-02-09_75b5eab955b1d8.png\"\u003e\u003c\/figure\u003e\u003cul\u003e\n\u003cli\u003ePrinting the lids standing make their tabs are much more solid than if they were printed on their flat side.   \u003c\/li\u003e\n\u003cli\u003eTo save on filament, you can print only the Secret lids (orange with question mark).\u003c\/li\u003e\n\u003cli\u003eTo add color, you can print inlays (yellow, plate 2 and 4) then glue them to the top side of the lids.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cfigure class=\"image image_resized\" style=\"width: 29.37%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000477241\/design\/2025-03-01_b9e9f29b87713.jpg\"\u003e\u003c\/figure\u003e\u003cul\u003e\u003cli\u003eThe lids and bases are not compatible with other versions of the Secret tile lids\/bases.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eAssembly of flipper tiles\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe\u003cstrong\u003e Flip Flop\u003c\/strong\u003e and \u003cstrong\u003eSecret Click Twozu\u003c\/strong\u003e flippers have support in their center, which needs to be removed.\u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 41.75%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000477241\/design\/2025-02-09_47baa1823ebe28.png\"\u003e\u003c\/figure\u003e\u003cp style=\"text-align: center\"\u003e\u003ci\u003eView from under the plate: supports are shown in green.\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eMost Hextraction tile bases have small tabs in their underside notches. Those tabs are built-in supports that need to be removed using pliers or a hobby knife. They help printing the overhang in the notches.\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000477241\/design\/2025-02-09_eafe70e36c702.tiff\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlip flop \u003c\/strong\u003etiles have flippers that require one M3x10 or M3x12 bolt each and one or two washers.\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000477241\/design\/2025-03-01_d08d90690668d.png\"\u003e\u003c\/figure\u003e\u003cp\u003eDon't overtighten, you could strip the tile's PLA. You want the flipper to spin freely. If it does not, try adding a second washer or a bit of grease. \u003cbr\u003e \u003c\/p\u003e\u003cp style=\"text-align: center\"\u003e\u003ci\u003eThe assembly of flipper tiles requires fine-tuning.\u003c\/i\u003e\u003c\/p\u003e\u003cp style=\"text-align: center\"\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThere are 2 versions of the \u003cstrong\u003eSecret Click Twozu \u003c\/strong\u003eflippers on plate 5:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eone for 10 mm balls (I made a larger hole);\u003c\/li\u003e\n\u003cli\u003eone for 3\/8 balls. If you need the 3\/8 version, right-click on it to make it “printable” (it will go from black to orange) and remove the 10mm version. I have printed it but did not tested this version since I don't have 3\/8 balls.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cfigure class=\"image image_resized\" style=\"width: 34.3%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000477241\/design\/2025-02-10_25054cf008068.png\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe flippers on the \u003cstrong\u003eSecret Click\u003c\/strong\u003e Twozu tiles require one M3x8 bolt and one washer. Their assembly is similar to the the Flip Flop tiles, except that they are no pegs and slots.\u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 30.94%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000477241\/design\/2025-03-01_9ff3db2e716b6.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003ePlaying the flipper tiles\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen you play these tile, you are allowed to set the flipper as you like. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 40.41%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000477241\/design\/2025-03-01_9cf17d359744d.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003ePlaying the Secret Click tiles\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen you play a \u003cstrong\u003eSecret Click\u003c\/strong\u003e tile, make sure opponents can't see the inside then remove the lid. If there is a flipper, you can set it in whatever orientation suits you. If it's the \u003cstrong\u003eTwozu \u003c\/strong\u003etile, add a ball in the flipper.  Then click the lid on the base and place the tile where it will cause trouble for your opponents. Opponents can not lift or even touch the Secret tiles to have a peek. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 70.13%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000477241\/design\/2025-02-09_68139b67834068.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eRules for tiles set B\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis set contains not effect tiles, so there are no specific rules for them.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eComments, suggestions, ratings\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003eAs you can tell I put in a lot of time to provide the best board and tiles, documenting everything so newcomers can easily understand how to print and play this game. Every comment, suggestion, rating will be appreciated.  \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eAny boost will go straight to my 9 year old's DIY fund and will encourage me to put in the effort to provide clear instructions and post additional sets of tiles.\u003cbr\u003e\u003cbr\u003eThank you. Enjoy the game!\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003eA \u003cstrong\u003ebig thank you\u003c\/strong\u003e to \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/thangs.com\/designer\/NoStepOnDeez\"\u003eNoStepOnDeez\u003c\/a\u003e who fixed the problematic Secret tiles with an clever and well designed system. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eTiles by\u003cbr\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/thangs.com\/designer\/ZackFreedman\"\u003eZackFreedman\u003c\/a\u003e\u003cspan style=\"color: #000000\"\u003e \u003c\/span\u003eand most Hextraction designers\u003c\/p\u003e\u003cp\u003eare under the following MIT License:\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eCopyright (c) 2023 Zachary Freedman and Voidstar Lab LLC Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the \"Software\"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and\/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp style=\"text-align: center\"\u003e---------------------------\u003c\/p\u003e\u003ch2 style=\"text-align: center\"\u003e\u003cstrong\u003e\u003cu\u003eNew to MakerWorld?\u003c\/u\u003e\u003c\/strong\u003e\u003c\/h2\u003e\u003cp\u003e\u003cu\u003eWhat are Boosts? \u003c\/u\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoosts\u003c\/strong\u003e are a great way to show your support: users get \u003cstrong\u003e12 points\u003c\/strong\u003e per boost, and \u003cstrong\u003eboost\u003c\/strong\u003e \u003cstrong\u003eare free to you\u003c\/strong\u003e (we all receive 2 free boosts every 2 weeks). \u003cstrong\u003eYOU\u003c\/strong\u003e even\u003cstrong\u003e get 5 points\u003c\/strong\u003e when you first boost any model, and\u003cstrong\u003e 2 points\u003c\/strong\u003e thereafter. You don't have to print a model to boost.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cu\u003eRating print profiles \u003c\/u\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRating a print profile\u003c\/strong\u003e encourages users to post their models: they earn \u003cstrong\u003e2 points\u003c\/strong\u003e  for each \u003cstrong\u003e4 or 5 star\u003c\/strong\u003e rating, and \u003cstrong\u003eYOU get\u003c\/strong\u003e up to 50 points\/month for rating models you printed. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cu\u003eHow to rate a model\/print profile?\u003c\/u\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eOn the \u003cstrong\u003eMakerworld website\u003c\/strong\u003e, click on your avatar and look for « Ratings » (image below).\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"image_resized\" style=\"width: 26.59%\" src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000477241\/design\/2024-12-26_992a78880e3928.png\"\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eIn the \u003cstrong\u003eBambu Handy app\u003c\/strong\u003e, tap \"Me\" at the bottom to find a purple ratings folder.\u003c\/li\u003e\n\u003cli\u003eIn \u003cstrong\u003eBambu Studio\u003c\/strong\u003e \u003cstrong\u003esoftware \u003c\/strong\u003e(or Orca Slicer), you can only rate the last model you printed in the Device tab, under Print progress.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesign by DomPerignon on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67410049040688,"sku":"MW-477241","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_53eaf14c-405b-43c2-939a-91f661f0b851.png?v=1785285775","url":"https:\/\/mymadmanlab.com\/products\/hextraction-tiles-set-b-flip-flop-secret-tiles","provider":"Mymadmanlab.com","version":"1.0","type":"link"}