{"product_id":"hoテル-lamp-cyberpunk-2077-hoteru-glowing-sign","title":"HOテル Lamp (Cyberpunk 2077 Hoteru glowing sign)","description":"\u003cfigure class=\"image image_resized\" style=\"width: 75.1%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_2316a0dd8d509.webp\" alt=\"A slice of neon-soaked Cyberpunk 2077 Night City ambiance.\"\u003e\u003cfigcaption\u003eA slice of neon-soaked Cyberpunk 2077 Night City ambiance.\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cp\u003eA \u003cstrong\u003eHOテル Lamp\u003c\/strong\u003e powered by a \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.az-delivery.de\/fr\/products\/esp32-d1-mini-nodemcu-wifi-modul-esp-32-bluetooth-internet-entwicklungsboard-mit-usb-c-anschluss-kompatibel-mit-arduino-und-kompatibel-mit-wemos-d1-mini\"\u003eUSB-C ESP32 D1 Mini\u003c\/a\u003e and four \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/aliexpress.com\/item\/1005010216139423.html\"\u003e4x4 WS2812B LED Matrices\u003c\/a\u003e, running \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/kno.wled.ge\/\"\u003eWLED\u003c\/a\u003e for full RGB lighting control and an easy \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.home-assistant.io\/integrations\/wled\/\"\u003eHome-Assistant integration\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThis is the horizontal version of the lamp. An alternative \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/fr\/models\/2770488\"\u003evertical version is available here\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eFeaturing:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional and reversible ESP32 D1 mini case\u003c\/strong\u003e (allows the USB-C connector to face left or right; removable if you prefer to drive the lamp with another controller).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy front and back plate assembly\u003c\/strong\u003e with print-in-place locking tabs and \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/youtu.be\/6DkCCOc5O1Y?si=faapWuKgPnA3p996\u0026amp;t=125\"\u003ebuilt-in supports\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight-blocking walls on the front plate\u003c\/strong\u003e, enabling per-letter illumination with minimal light bleed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBill of Materials\u003c\/h2\u003e\u003cp\u003eThe lamp was designed to fit the following components:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.az-delivery.de\/fr\/products\/esp32-d1-mini-nodemcu-wifi-modul-esp-32-bluetooth-internet-entwicklungsboard-mit-usb-c-anschluss-kompatibel-mit-arduino-und-kompatibel-mit-wemos-d1-mini\"\u003e\u003cstrong\u003eUSB-C\u003c\/strong\u003e ESP32 D1 Mini\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/aliexpress.com\/item\/1005010216139423.html\"\u003e\u003cstrong\u003e30x30 mm\u003c\/strong\u003e, 4x4 WS2812B LED Matrix\u003c\/a\u003e (4 total, one per letter)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eYou will also need:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWires\u003cul\u003e\n\u003cli\u003e5cm x 12\u003c\/li\u003e\n\u003cli\u003e13 cm x 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptional: a small 3-pins connector (\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.amazon.fr\/dp\/B0CT5TP9PC\"\u003eJST-XH 2.5 mm crimped connectors\u003c\/a\u003e work well) to make assembly and disassembly easier.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cfigure class=\"image image_resized\" style=\"width: 50.02%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_95642335fc9888.jpg\"\u003e\u003c\/figure\u003e\u003ch2\u003ePrinting recommandations\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe \u003cstrong\u003eH\u003c\/strong\u003e, \u003cstrong\u003eO\u003c\/strong\u003e, \u003cstrong\u003eテ \u003c\/strong\u003eand \u003cstrong\u003eル \u003c\/strong\u003elight diffusers should be printed on a \u003cstrong\u003esmooth build plate\u003c\/strong\u003e (smooth PEI or similar) using a \u003cstrong\u003elight-diffusing color\u003c\/strong\u003e (e.g., white PLA). Using a textured plate will change the appearance of the letters, which might be desirable depending on the style you want.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not enable slicer-generated supports\u003c\/strong\u003e, especially on the backplate, as they may interfere with the built-in model supports.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstructions\u003c\/h2\u003e\u003ch3\u003e1. Electronics\u003c\/h3\u003e\u003ch4\u003e\n\u003cstrong\u003e1.1.\u003c\/strong\u003e ESP32\u003c\/h4\u003e\u003cfigure class=\"image image_resized\" style=\"width: 50.06%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_6e26eab80ac99.jpg\"\u003e\u003cfigcaption\u003eUSB-C ESP32 D1 Mini, wires \u0026amp; JST-XH connector\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cp\u003eSolder three 5 cm wires to the ESP32 on the following headers:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e5V\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIO16 \u003c\/strong\u003e(\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/kno.wled.ge\/basics\/getting-started\/#quick-start-guide\"\u003eas recommended by the WLED documentation\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThen crimp or solder the wires to the JST-XH connector.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 50.06%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_0f2b4b0cfd4b4.jpg\"\u003e\u003cfigcaption\u003eUSB-C ESP32 D1 Mini with soldered wires \u0026amp; crimped JST-XH connector\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cp\u003eFinally, follow the official WLED documentation to install WLED on your ESP32:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/install.wled.me\/\"\u003eWLED installer site\u003c\/a\u003e (recommanded method)\u003c\/li\u003e\n\u003cli\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/kno.wled.ge\/basics\/install-binary\/\"\u003eWLED documentation\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf your ESP32 is not recognized (no COM port), you may need to install the \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.silabs.com\/software-and-tools\/usb-to-uart-bridge-vcp-drivers?tab=downloads\"\u003eCP210x USB to UART driver\u003c\/a\u003e.\u003c\/p\u003e\u003ch4\u003e1.2. LED matrices\u003c\/h4\u003e\u003cfigure class=\"image image_resized\" style=\"width: 50.03%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_d363c66e7d0778.jpg\"\u003e\u003cfigcaption\u003eUSB-C ESP32 D1 Mini, LED Matrices, JST-XH connector and wires\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cp\u003eSolder the 4 LED Matrices in serie, using ~5 cm wires as follows:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGND \u003c\/strong\u003e→ \u003cstrong\u003eGND\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5V\/VCC \u003c\/strong\u003e→ \u003cstrong\u003e5V\/VCC\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOUT \u003c\/strong\u003e→ \u003cstrong\u003eIN\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOn the \u003cstrong\u003efirst matrix\u003c\/strong\u003e (the one with the unsoldered \u003cstrong\u003eIN\u003c\/strong\u003e pad), solder the three 13 cm wires to:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eGND\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e5V\/VCC\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIN\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThen crimp or solder the wires to the JST-XH connector, making sure to follow the pin order below so that, once both connectors are plugged together, the wiring matches properly:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eESP32 \u003cstrong\u003eGND → \u003c\/strong\u003eMatrix \u003cstrong\u003eGND\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eESP32 \u003cstrong\u003e5V → \u003c\/strong\u003eMatrix \u003cstrong\u003e5V\/VCC\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eESP32 \u003cstrong\u003eIO16 → \u003c\/strong\u003eMatrix \u003cstrong\u003eIN\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cfigure class=\"image image_resized\" style=\"width: 50.12%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_f30cf4f76ee308.jpg\"\u003e\u003cfigcaption\u003eBack view of the soldered USB-C ESP32 D1 Mini, LED Matrices and JST-XH connector\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure class=\"image image_resized\" style=\"width: 50.02%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_5aaf2f343c8578.jpg\"\u003e\u003cfigcaption\u003eFront view of the soldered USB-C ESP32 D1 Mini, LED Matrices and JST-XH connector\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cp\u003eIt’s a good time to check that everything is working properly by powering up the ESP32 and making sure everything behave as expected.\u003c\/p\u003e\u003cp\u003eYou may want to check the \u003cstrong\u003eWLED configuration section below (Part 3.)\u003c\/strong\u003e if you want to test everything at this stage.\u003c\/p\u003e\u003ch2\u003e2. Lamp assembly\u003c\/h2\u003e\u003cfigure class=\"image image_resized\" style=\"width: 50.02%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_41b148b99875c8.jpg\"\u003e\u003cfigcaption\u003e3D printed parts\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cp\u003eThe lamp consists of:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eH, O, テ and ル\u003cstrong\u003e light diffusers\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrontplate \u003c\/strong\u003e(including the internal structure for the “O” letter)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBackplate\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eUSB-C ESP32 D1 Mini \u003cstrong\u003emounting case\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e2.1. Front plate\u003c\/h3\u003e\u003cfigure class=\"image image_resized\" style=\"width: 50.02%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_7d3b644002d06.jpg\"\u003e\u003cfigcaption\u003eFrontplate parts\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cp\u003eStart by clipping the inner part of the \u003cstrong\u003eO\u003c\/strong\u003e into the \u003cstrong\u003eO diffuser\u003c\/strong\u003e.\u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 50.03%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_09cff76d15b4b.jpg\"\u003e\u003cfigcaption\u003eSmall drops of glue used to hold the diffuser\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cp\u003eDepending on your printer’s tolerances or the filament used, you may need a small amount of glue. If so, only a few drops should be enough.\u003cbr\u003eFor easier assembly, apply the glue to the \u003cstrong\u003efront plate groove\u003c\/strong\u003e, then press the diffuser into place.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eAssemble all the letters and katakana onto the front plate.\u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 50.05%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_cc4b5f8148fc9.jpg\"\u003e\u003cfigcaption\u003eAssembled frontplate front view\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure class=\"image image_resized\" style=\"width: 50.07%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_bc16de544e9758.jpg\"\u003e\u003cfigcaption\u003eAssembled frontplate back view\u003c\/figcaption\u003e\u003c\/figure\u003e\u003ch3\u003e2.2. ESP32 case\u003c\/h3\u003e\u003cp\u003eMount the \u003cstrong\u003eESP32\u003c\/strong\u003e into the mouting case.\u003c\/p\u003e\u003cp\u003eInsert the \u003cstrong\u003eUSB-C connector first\u003c\/strong\u003e, then gently push the \u003cstrong\u003eantenna side\u003c\/strong\u003e past the retaining clips.\u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 50.01%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_c61fa109021c7.jpg\"\u003e\u003cfigcaption\u003eESP32 clipped to the mounting case\u003c\/figcaption\u003e\u003c\/figure\u003e\u003ch3\u003e2.3. Backplate\u003c\/h3\u003e\u003cp\u003eThe backplate feature retention clips with \u003cstrong\u003ein-model supports\u003c\/strong\u003e (~1 mm thick) that are meant to be broken during assembly. You can cut or break them off now. Once the supports are removed, the clips will gain a bit of flexibility.\u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 50.03%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_fedb809d8c8148.jpg\"\u003e\u003cfigcaption\u003eSupports\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cp\u003eMount all four LED matrices, from left to right, onto the back plate.\u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 50.08%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_a22f8afc5f0c7.jpg\"\u003e\u003cfigcaption\u003eLED Matrices mounted on the backplate\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cp\u003ePush all the wires into the channels between the walls. These walls will later align with the light-blocking walls of the front plate, so \u003cstrong\u003emake sure no wires remain in the way\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eClip the ESP32 mounting case onto the back of the backplate, ensuring that the connector passes through the hole designed for it.\u003c\/p\u003e\u003cp\u003eIt’s normal if the ESP32 doesn’t align at this stage: it will once the frontplate is installed.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eYou can choose to orient the USB-C connector to the left or to the right, depending on your preference.\u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 49.94%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_9744ae8478a8a.jpg\"\u003e\u003cfigcaption\u003eESP32 mounted to the backplate.\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cp\u003eYou can now connect both ends of the JST-XH connector.\u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 50%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_47d81f680ca9a.jpg\"\u003e\u003cfigcaption\u003eFully assembled backplate\u003c\/figcaption\u003e\u003c\/figure\u003e\u003ch3\u003e2.4. Final assembly\u003c\/h3\u003e\u003cp\u003eThe backplate clips onto the front plate. Just make sure that the ESP32 ends up at the base of the lamp once everything is assembled.\u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 50.03%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_39995d7042191.jpg\"\u003e\u003cfigcaption\u003eBackplate ready to clip into the frontplate\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure class=\"image image_resized\" style=\"width: 49.9%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_7c3df1fa81a6c.jpg\"\u003e\u003cfigcaption\u003eAssembled frontplate and backplate\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure class=\"image image_resized\" style=\"width: 49.97%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_2c51845a35847.jpg\"\u003e\u003cfigcaption\u003eBack of the lamp\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure class=\"image image_resized\" style=\"width: 50.1%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_c4f0fee17af93.jpg\"\u003e\u003cfigcaption\u003eFront of the lamp\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cfigure class=\"image image_resized\" style=\"width: 49.98%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_fd1fa2e5d6ab3.jpg\"\u003e\u003cfigcaption\u003eTime to light it up\u003c\/figcaption\u003e\u003c\/figure\u003e\u003ch2\u003e3. WLED configuration\u003c\/h2\u003e\u003ch3\u003e3.1. LED Preferences\u003c\/h3\u003e\u003cp\u003eIn the WLED \u003cstrong\u003eLED \u0026amp; Hardware \u003c\/strong\u003emenu, you should configure:\u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 44.99%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_47e3777b8fe588.png\"\u003e\u003cfigcaption\u003eWLED LED Preferences\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cul\u003e\n\u003cli\u003eEnable automatic brightness limiter: \u003cstrong\u003eEnabled\u003c\/strong\u003e (since the LED matrices are powered from the ESP32’s 5V line)\u003c\/li\u003e\n\u003cli\u003eMaximum PSU Current: \u003cstrong\u003e1000mA\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cfigure class=\"image image_resized\" style=\"width: 35.87%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_b126218113a4a.png\"\u003e\u003cfigcaption\u003eWLED LED Outputs\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cp\u003eAnd under the \u003cstrong\u003eHardware Setup\u003c\/strong\u003e, set:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLength: \u003cstrong\u003e64\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eData GPIO: \u003cstrong\u003e16\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e3.2. 2D Configuration\u003c\/h3\u003e\u003cp\u003eUnder the WLED \u003cstrong\u003e2D Configuration\u003c\/strong\u003e, you can generate the matrix layout using the built-in panel generator with the following settings:\u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 35.9%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_f65f94461edc98.png\"\u003e\u003cfigcaption\u003eWLED 2D Setup\u003c\/figcaption\u003e\u003c\/figure\u003e\u003cul\u003e\n\u003cli\u003eStrip or panel: \u003cstrong\u003e2D Matrix\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePanel dimensions: \u003cstrong\u003e4 x 4\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eHorizontal panels: \u003cstrong\u003e4\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eVertical panels: \u003cstrong\u003e1\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eOrientation: \u003cstrong\u003eHorizontal\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSerpentine: \u003cstrong\u003eYes \u003c\/strong\u003e(was the case for the panels referenced in the bill of materials).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e3.3. Segments\u003c\/h3\u003e\u003cp\u003eOnce the matrix is configured, you can easily create segments for each letter, allowing you to assign different colors or effects to each letter or katakana:\u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 75.18%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_5200422f422b2.png\"\u003e\u003c\/figure\u003e\u003cul\u003e\n\u003cli\u003eSegment “\u003cstrong\u003eH\u003c\/strong\u003e”\u003cul\u003e\n\u003cli\u003eStart X: \u003cstrong\u003e0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eStop X: \u003cstrong\u003e4\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSegment “\u003cstrong\u003eO\u003c\/strong\u003e”\u003cul\u003e\n\u003cli\u003eStart X: \u003cstrong\u003e4\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eStop X: \u003cstrong\u003e8\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSegment “\u003cstrong\u003eテ\u003c\/strong\u003e” \/ “\u003cstrong\u003eTe\u003c\/strong\u003e”\u003cul\u003e\n\u003cli\u003eStart X: \u003cstrong\u003e8\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eStop X: \u003cstrong\u003e12\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSegment “\u003cstrong\u003eル\u003c\/strong\u003e” \/ “\u003cstrong\u003eRu\u003c\/strong\u003e”\u003cul\u003e\n\u003cli\u003eStart X: \u003cstrong\u003e12\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eStop X: \u003cstrong\u003e16\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOnce the segments are created, you can assign colors and effects to each one individually.\u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 50%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002004099\/design\/2025-11-16_21d51ed873b8b.jpg\"\u003e\u003cfigcaption\u003eDifferent colors for each segment\u003c\/figcaption\u003e\u003c\/figure\u003e\u003ch2\u003e4. Home-Assistant integration\u003c\/h2\u003e\u003cp\u003eThis lamp can easily be integrated into \u003cstrong\u003eHome Assistant\u003c\/strong\u003e or any \u003cstrong\u003eWLED-compatible automation\u003c\/strong\u003e setup.\u003c\/p\u003e\u003cp\u003eYou might be especially interested in:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.home-assistant.io\/integrations\/wled\/\"\u003eThe official WLED integration\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eDesign by Rauks on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67396735467824,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_3cc001ca-47f0-4ad1-9a3b-4e566687beed.png?v=1784853376","url":"https:\/\/mymadmanlab.com\/products\/ho%e3%83%86%e3%83%ab-lamp-cyberpunk-2077-hoteru-glowing-sign","provider":"Mymadmanlab.com","version":"1.0","type":"link"}