{"product_id":"ikea-samla-45l-filament-storage-box","title":"Ikea Samla 45L - Filament Storage Box","description":"\u003cp\u003eInspired by the \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/81366#profileId-86600\"\u003e22l Filament Storage box\u003c\/a\u003e I was looking for a similar 45L storage only box system which I was not able to find in all universes. So, I mixed up and share my own arrangement. I do not need any rods for storing spools or printing out of the boxes, I only want to pack as many spools as I could into the boxes. The 45L box can accommodate 10 normal sized spools plus some 250g ones without any problems.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe boxes should be airtight. Therefore please add rubber foam to the boxes. I used foam from \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.amazon.de\/dp\/B0DHRP86MC\"\u003eAmazon\u003c\/a\u003e (German link) but \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.aliexpress.com\/item\/1005005841973791.html\"\u003eAliexpress\u003c\/a\u003e can be also a source. You need app. 2m per box.\u003c\/p\u003e\u003cp\u003e2026-03-24: New Aliexpress link: \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/de.aliexpress.com\/item\/1005006445629735.html\"\u003ehttps:\/\/de.aliexpress.com\/item\/1005006445629735.html\u003c\/a\u003e Select D shape.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch3\u003eThe plates consist of:\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eNever lost Ikea Samla Clip Remix (11l, 22l, 45l, 65l)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnmodified from origin. These clips do not add much height. Please use at least PETG to avoid breaking. A brim is added to the profile for the clips. I use 6 clips on the boxes only. \u003cspan style=\"background-color: rgb(255,255,255); color: rgb(42,42,42); font-size: 16px\"\u003eUse some glue or double-sided tape for a durable fixation on the box edges.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIkea Samla 45L Sliding \/ Gliding Feet\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIdeal when moving the boxes under a shelf etc on carpets or even on chipboard. Can be printed from PLA or better. Material saving option is standard. If you like the full version please change. Both feet included. Available as single plate \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/811633\"\u003ehere\u003c\/a\u003e. Fix on the box with double-sided tape.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDrybox humidity sensor mount\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe origin design \u003cspan style=\"background-color: rgb(255,255,255); color: rgb(33,43,54); font-size: 16px\"\u003ewas perfect for my needs except for the fit of the screws \/ nuts\u003c\/span\u003e. Therefore I remixed the front mount to fit easily heads of normal hex socket screws (SHCS) and modified the back part that M3x8 or 10mm screws fit without nut. Just screw the bolts into the plastic but do not over-tighten. Available as single plate \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/911399\"\u003ehere\u003c\/a\u003e. Material to be PLA or better. 3.5mm drill needed. Round hygrometer can be purchased e.g. on  \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.aliexpress.com\/item\/1005007591429508.html\"\u003eAliexpress\u003c\/a\u003e or Amazon.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch3\u003eNot on the plates 😭:\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eSilicagel boxes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnfortunately, the best Silicagel boxes I could find are copyright protected \u003cspan style=\"background-color: rgb(255,255,255); color: rgb(51,51,51); font-size: 16px\"\u003e(which should be respected)\u003c\/span\u003e. Therefore I cannot share directly. Fortunately, you can get them for your email address at \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/3d-print-files.com\/free-3d-print-model-silica-gel-box-addon-filament-box\/\"\u003ehttps:\/\/3d-print-files.com\/free-3d-print-model-silica-gel-box-addon-filament-box\/\u003c\/a\u003e including a detailed printing and mounting manual for free. Standard Bambu 0.2mm profile with 0.4mm nozzle will do the job. Material should be PETG for all parts. 100% infill on brackets and fasteners and a outer brim for the brackets might be helpful. The boxes to be printed preferably from transparent material. Please use the L size boxes for 45L (should still fit on A1mini) and the S size for 22L. 10mm drill for the mounting holes needed. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"background-color: rgb(255,255,255); color: rgb(51,51,51); font-size: 16px\"\u003eIf you have less space for the boxes have a look at my 22l version: \u003c\/span\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/makerworld.com\/en\/models\/911520-ikea-samla-22l-filament-storage-box-v2#profileId-872558\"\u003e\u003cspan style=\"background-color: rgb(255,255,255); color: rgb(51,51,51); font-size: 16px\"\u003ehttps:\/\/makerworld.com\/en\/models\/911520-ikea-samla-22l-filament-storage-box-v2#profileId-872558\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesign by kreidler on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67383272210736,"sku":null,"price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_0b345da5-9780-4add-bcd6-f244ef8b32b5.png?v=1784495487","url":"https:\/\/mymadmanlab.com\/products\/ikea-samla-45l-filament-storage-box","provider":"Mymadmanlab.com","version":"1.0","type":"link"}