Indoor Plant Pot with Base Free Commercial License

I want to say a big thank you to all my followers and supporters. To celebrate reaching 5,000 followers, I’m giving away this model with a free commercial license. If you have any questions or need anything clarified, feel free to reach out to me via chat.

🎯 Recommended Print Settings
For best results, print this design with a 0.4mm nozzle at 0.24mm layer height for a great balance of speed and detail. Use 8-15% infill for a solid, lightweight print that won’t use too much material.

I used 3 wall loops and 5 bottom layers for the base to improve water resistance as much as possible, but keep in mind that 3D prints aren’t fully watertight by nature.

You can scale the model to your preferred size.

⚡ Speed vs. Quality Trade-off
The model is optimized for a 0.4mm nozzle, but I’ve also had success with a 0.6mm nozzle if you’re looking to speed things up. 

All photos provided are copyright-protected and intended only for showcasing the model. Please use your own images for commercial use.

Design by Nordic Creativa on MakerWorld (license: BY-ND).