{"product_id":"infinity-filament-clip-bambu-lab-reusable-spool","title":"Infinity Filament Clip (Bambu Lab Reusable Spool)","description":"\u003cp\u003eThe \u003cstrong\u003eInfinity Filament Clip\u003c\/strong\u003e will stay on your \u003cstrong\u003eBambu Lab Reuseable Spool\u003c\/strong\u003e forever and can stay in the AMS without any issues on both sides :)\u003cbr\u003e\u003cbr\u003eWhy another Filament clip?  Filament clips are incredibly useful, but they often come with their own set of frustrations: they can be fiddly to attach, easily lost, or they sit on the rim of the spool and snap off when you store the spool on a shelf. In my search for a better clip, I tried various designs. One in particular by Kevbot, caught my attention - a clip that could be mounted directly onto the spool with screws. Although it was close to what I needed, it had a few drawbacks: it was too bulky, and sometimes aftermarket refills wouldn't fit comfortably on the spool (especially B grade mysterybox refills from Recycling Fabrik).\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThis gave me the idea to redesign it to be more low-profile, using button-head screws mounted from the outside. While working on this, I stumbled across another clever solution by the same designer - a clip that simply snapped into the spool holes without the need for screws.\u003c\/p\u003e\u003cp\u003eAnd that’s when it hit me: \u003ci\u003escrew the screw\u003c\/i\u003es! I created the \u003cstrong\u003eInfinity Filament Clip\u003c\/strong\u003e, the \u003ci\u003eLAST \u003c\/i\u003efilament clip you'll ever need. For real this time … pinky promise ;)\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 65.66%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000740214\/design\/2024-10-29_b973e37c5ba43.jpg\"\u003e\u003c\/figure\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSnaps into existing holes of your reusable spool\u003c\/li\u003e\n\u003cli\u003eNo hardware needed\u003c\/li\u003e\n\u003cli\u003eDoes not protrude outside the spool\u003c\/li\u003e\n\u003cli\u003ePrints without supports\u003c\/li\u003e\n\u003cli\u003eUltra-low profile on the inside\u003c\/li\u003e\n\u003cli\u003eCan stay on permanently (but removes easily if needed)\u003c\/li\u003e\n\u003cli\u003eFully compatible with AMS, AMS 2 Pro, AMS HT and AMS Lite\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrinting\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded profile for Bambu Lab printers\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse any material you like\u003c\/strong\u003e, but if the spools will be used in an active filament dryer, choose a material with a suitable heat deflection temperature. \u003ci\u003ePETG\u003c\/i\u003e works well up to 70°C; for higher temperatures, consider \u003ci\u003eASA\u003c\/i\u003e, \u003ci\u003eABS\u003c\/i\u003e, or \u003ci\u003ePA\u003c\/i\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTight tolerances\u003c\/strong\u003e: For best results, print at a low layer height of \u003ci\u003e0.10 mm\u003c\/i\u003e, flat on the build plate with pegs facing up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated bridge compensation structure\u003c\/strong\u003e included for optimal print quality.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAssembly\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAfter printing\u003c\/strong\u003e, check for any small filament specks caught in the openings. Ensure that filament passes through freely by using a stiff piece of filament to clear the channel.\u003c\/li\u003e\n\u003cli\u003eOnce clear, gently press the clips parallel into the holes. You may use pliers or press them firmly in place using the edge of a table.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eChangelog\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003e2025-12-15 v7:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCompatiblity with AMS 2 Pro (thx to @cdeerinck for the help with prototyping)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eDesign by suit1337 on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67368156397872,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_efab6092-c718-4a4c-a381-3d62bb75dc8b.png?v=1784023671","url":"https:\/\/mymadmanlab.com\/products\/infinity-filament-clip-bambu-lab-reusable-spool","provider":"Mymadmanlab.com","version":"1.0","type":"link"}