{"product_id":"jetkvm-single-and-double","title":"JetKVM - Single and Double","description":"\u003cp\u003eThis is a reupload of the original Model all credit to JaredC01\u003cbr\u003e\u003cbr\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/model\/1105303-jetkvm-1u-rackmount\" rel=\"nofollow noopener\"\u003ehttps:\/\/www.printables.com\/model\/1105303-jetkvm-1u-rackmount\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eHey all!  If you're here, you probably want a cool mounting solution for your JetKVM into a 1U rackmount form factor.  You're in luck!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eBelow I've outlined options for both fully 3D-printed solutions, as well as hybrid solutions utilizing laser-cut aluminum panels paired with 3D-printed parts, and the recommendations on accompanying hardware for each.  All links are US-based, and non-affiliate links.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFiles can be found in the “\u003cstrong\u003eFully 3D-Printed Files\u003c\/strong\u003e” folder.\u003c\/li\u003e\n\u003cli\u003eAvailable in Short 1-2 module and full-width 1-4 module configurations (mix and match 1-2 module left and right halves).\u003c\/li\u003e\n\u003cli\u003eFully printable on common 3D printer bed sizes down to 255x255mm in size (for full-width configuration; Short models can be printed on even smaller printers).\u003c\/li\u003e\n\u003cli\u003eAble to be printed in two colors for a cool standout effect (full-width only).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003e\u003cstrong\u003eRequired Hardware\u003c\/strong\u003e\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003e2x M2x16 SHCS Machine Screws (per module - up to 8x total with 4 total modules) - \u003c\/strong\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.amazon.com\/gp\/product\/B094NSV83Q\" rel=\"nofollow noopener\"\u003e\u003cstrong\u003eiexcell - Amazon\u003c\/strong\u003e\u003c\/a\u003e\u003cul\u003e\u003cli\u003eThis is a 100-screw pack.  You will have plenty of spares.  Feel free to find a combination kit that includes M2x16 SHCS screws if you don't want 100 of these.\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x M3x4x5 Brass Heatset Inserts (ONLY REQUIRED for full-width configuration) - \u003c\/strong\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.amazon.com\/dp\/B0CXXS3LHD\/\" rel=\"nofollow noopener\"\u003e\u003cstrong\u003ePEUTIER - Amazon\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e \u003cul\u003e\u003cli\u003eThis kit includes the heatset tip for your soldering iron, and fits most of the older ceramic-style irons. 120 total pieces (they go fast if you print a lot of functional parts).\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x M3x12 SHCS Machine Screws (ONLY REQUIRED for full-width configuration) - \u003c\/strong\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.amazon.com\/dp\/B08R3GVJVC\" rel=\"nofollow noopener\"\u003e\u003cstrong\u003eiexcell - Amazon\u003c\/strong\u003e\u003c\/a\u003e\u003cul\u003e\u003cli\u003eAnother 100-screw pack.  As above, plenty of spares, and feel free to find alternate options.\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e \u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003eSlicer Configuration and Info\u003c\/strong\u003e\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAll models are saved in the correct orientation to the build plate.  You can rotate the part, but do not change the side that touches the bed!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNONE \u003c\/strong\u003eof the models require supports.  Turn supports off in your slicer for these models.\u003c\/li\u003e\n\u003cli\u003eRecommended Slicing Settings:\u003cul\u003e\n\u003cli\u003eLayer Height: 0.2mm\u003c\/li\u003e\n\u003cli\u003ePerimeters: 4\u003c\/li\u003e\n\u003cli\u003eTop\/Bottom Layers: 5\u003c\/li\u003e\n\u003cli\u003eInfill: 40%\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTo help prevent part warping, please wait until the bed has fully cooled before removing the part from the bed! (This goes double for the full-width parts!)\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003ch4\u003eShort Model Info\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eChoose your specific configuration from the STL files in the list, and import into your slicer.\u003cul\u003e\n\u003cli\u003eShort models will be listed with \"Short\" in their title.\u003c\/li\u003e\n\u003cli\u003eFiles listed as \"Left Mount\" will mount on the left half of the rack.  Files listed as \"Right Mount\" will mount on the right half of the rack.\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eShort Model Assembly\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eUnscrew the 2x Phillips head screws from the top of the JetKVM module, and slide the module into the 3D-printed housing until the screw holes in the printed part align with the holes in the JetKVM device.\u003c\/li\u003e\n\u003cli\u003eInstall 2x M2x16mm SHCS machine screws (per module) thru the printed part and into the JetKVM module.  Snug the screws using an Allen Key of the correct size.\u003c\/li\u003e\n\u003cli\u003eConnect cables to the JetKVM device, and install JetKVM into rack.\u003cul\u003e\u003cli\u003eBe careful when screwing the printed mount into your server\/network rack, and take care not to tighten the rack screws too tight!\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000911192\/design\/dc859ac8-d0a2-4be2-bf6a-7da1fa51a518.webp\"\u003e\u003c\/figure\u003e\u003cp\u003eDesign by Ryan512FL on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67383274242352,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_885baf15-5165-47ac-a451-a0c2e386b349.png?v=1784495606","url":"https:\/\/mymadmanlab.com\/products\/jetkvm-single-and-double","provider":"Mymadmanlab.com","version":"1.0","type":"link"}