{"product_id":"john-deere-gx10168-deck-wheel-5-in","title":"John Deere GX10168 Deck Wheel (5 in)","description":"\u003ch2\u003eJohn Deere GX10168-Style Deck Gauge \/ Anti-Scalp Wheel — L111 42-Inch Deck\u003c\/h2\u003e\u003cp\u003eThis is a 3D-printable replacement deck gauge \/ anti-scalp wheel that I modeled for my \u003cstrong\u003eJohn Deere L111 with a 42-inch mower deck\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eThe wheel is based around the common \u003cstrong\u003eJohn Deere GX10168-style deck wheel dimensions\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eThis is \u003cstrong\u003enot an official John Deere part\u003c\/strong\u003e. It is a user-made replacement model intended for personal repair, testing, and replacement use. Please verify your original wheel dimensions before printing or installing.\u003c\/p\u003e\u003ch2\u003eModeled For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eJohn Deere L111 42-inch mower deck\u003c\/li\u003e\n\u003cli\u003eGX10168-style deck gauge \/ anti-scalp wheel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKnown \/ Likely Compatibility\u003c\/h2\u003e\u003cp\u003eThis was modeled specifically for my John Deere L111 42-inch deck. GX10168-style deck wheels are commonly used on many John Deere 100, D, E, G, L, and LA series riding mower decks.\u003c\/p\u003e\u003cp\u003eLikely compatible models include:\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e100 Series:\u003c\/strong\u003e\u003cbr\u003e102, 105, 108, 115, 125, 135, 145, 155C, 190C\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eD Series:\u003c\/strong\u003e\u003cbr\u003eD100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eE Series:\u003c\/strong\u003e\u003cbr\u003eE100, E110, E120, E130, E140, E150, E160, E170, E180\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eG Series:\u003c\/strong\u003e\u003cbr\u003eG100, G110\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eL Series:\u003c\/strong\u003e\u003cbr\u003eL100, L105, L107, L108, L110, L111, L118, L120, L130, L1742, L2048, L2548, L2554\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLA Series:\u003c\/strong\u003e\u003cbr\u003eLA100, LA105, LA110, LA115, LA120, LA125, LA130, LA135, LA140, LA145, LA150, LA155, LA165, LA175\u003c\/p\u003e\u003cp\u003ePlease check your original part before printing. There may be deck variations depending on year, deck size, or previous repairs.\u003c\/p\u003e\u003ch2\u003eActual Modeled Dimensions\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOuter diameter: 5.000 in\u003c\/li\u003e\n\u003cli\u003eOuter radius: 2.500 in\u003c\/li\u003e\n\u003cli\u003eBore diameter: 0.638 in\u003c\/li\u003e\n\u003cli\u003eBore radius: 0.319 in\u003c\/li\u003e\n\u003cli\u003eHub diameter: 1.750 in\u003c\/li\u003e\n\u003cli\u003eHub radius: 0.875 in\u003c\/li\u003e\n\u003cli\u003eHub radial thickness around bore: 0.556 in\u003c\/li\u003e\n\u003cli\u003eHub width: 1.804 in\u003c\/li\u003e\n\u003cli\u003eOverall wheel width: 1.969 in\u003c\/li\u003e\n\u003cli\u003eRim stick-out past hub: about 0.083 in per side\u003c\/li\u003e\n\u003cli\u003eWeb width: 0.432 in\u003c\/li\u003e\n\u003cli\u003eWeb height: 1.000 in\u003c\/li\u003e\n\u003cli\u003eOuter rim height: 0.559 in\u003c\/li\u003e\n\u003cli\u003eTop arch radius: R7.33\u003c\/li\u003e\n\u003cli\u003eTotal modeled radius from axle centerline to outside crown: 2.500 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePrint Settings Used\u003c\/h2\u003e\u003cp\u003ePrinted on a \u003cstrong\u003eBambu Lab P1S\u003c\/strong\u003e using \u003cstrong\u003eeSUN ABS\u003c\/strong\u003e.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: eSUN ABS\u003c\/li\u003e\n\u003cli\u003eLayer height: 0.20 mm\u003c\/li\u003e\n\u003cli\u003eNozzle temperature: 265°C first layer, 260°C after\u003c\/li\u003e\n\u003cli\u003eBed temperature: 100°C\u003c\/li\u003e\n\u003cli\u003eWall loops: 7\u003c\/li\u003e\n\u003cli\u003eInfill: 50%\u003c\/li\u003e\n\u003cli\u003eInfill pattern: Gyroid\u003c\/li\u003e\n\u003cli\u003eTop shell layers: 8\u003c\/li\u003e\n\u003cli\u003eBottom shell layers: 8\u003c\/li\u003e\n\u003cli\u003eInitial layer speed: 30 mm\/s\u003c\/li\u003e\n\u003cli\u003eSupports: Normal auto supports\u003c\/li\u003e\n\u003cli\u003eBrim: Outer brim only, 8 mm width, 0 mm from part\u003c\/li\u003e\n\u003cli\u003eSeam position: Aligned\u003c\/li\u003e\n\u003cli\u003eDoor\/lid: Closed for ABS\u003c\/li\u003e\n\u003cli\u003eAux fan: Off or very low\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePrint Orientation\u003c\/h2\u003e\u003cp\u003ePrint the wheel flat on one face with the bore \/ axle hole vertical.\u003c\/p\u003e\u003cp\u003eNormal auto supports were used.\u003c\/p\u003e\u003ch2\u003eApproximate Print Stats\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eModel filament: about 254 g\u003c\/li\u003e\n\u003cli\u003eSupport filament: about 16 g\u003c\/li\u003e\n\u003cli\u003eTotal filament: about 270 g\u003c\/li\u003e\n\u003cli\u003eApproximate print time: 11 hours\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaterial Notes\u003c\/h2\u003e\u003cp\u003eI printed and tested mine using \u003cstrong\u003eeSUN ABS\u003c\/strong\u003e. After printing, I spray-painted the wheel with a \u003cstrong\u003eUV-resistant spray paint\u003c\/strong\u003e to help protect it from outdoor exposure.\u003c\/p\u003e\u003cp\u003eFor this application, \u003cstrong\u003eASA is likely the better material choice\u003c\/strong\u003e because it is better suited for UV exposure and outdoor use than ABS.\u003c\/p\u003e\u003cp\u003eABS, ASA, PETG, nylon, polycarbonate blends, or another tough outdoor-capable material may also work. Use a material that can handle heat, sun exposure, vibration, and impact.\u003c\/p\u003e\u003cp\u003eI would \u003cstrong\u003enot recommend PLA\u003c\/strong\u003e for long-term mower use because of heat, sun exposure, vibration, and impact.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMake sure the wheel spins freely on the bolt after printing.\u003c\/li\u003e\n\u003cli\u003eIf the bore prints slightly tight, lightly drill or ream it to fit.\u003c\/li\u003e\n\u003cli\u003eDo not force the wheel onto the bolt if the bore is undersized.\u003c\/li\u003e\n\u003cli\u003eThese are gauge \/ anti-scalp wheels and should not carry the full deck weight during normal mowing.\u003c\/li\u003e\n\u003cli\u003eSet the deck height and deck wheel position correctly after installation.\u003c\/li\u003e\n\u003cli\u003eTest fit before mowing.\u003c\/li\u003e\n\u003cli\u003eInspect the wheel after the first use and periodically afterward.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDisclaimer\u003c\/h2\u003e\u003cp\u003eThis is a user-made 3D model, not an official John Deere replacement part. Use at your own risk. Verify fitment, material strength, and safe mower operation before regular use.\u003c\/p\u003e\u003cp\u003eDesign by Andrew on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67372623462704,"sku":null,"price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_71fe0c4c-61d0-4d41-a382-9d961777cced.png?v=1784131031","url":"https:\/\/mymadmanlab.com\/products\/john-deere-gx10168-deck-wheel-5-in","provider":"Mymadmanlab.com","version":"1.0","type":"link"}