{"product_id":"kv-2-nozzle-holder-1","title":"KV-2 Nozzle Holder","description":"\u003ch3\u003e\u003cstrong\u003eKV-2 nozzle holder\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eA stylised KV-2 nozzle holder, built around the Ender 3 V3 KE nozzle, but works with any M6 nozzles. It's designed to sit proudly on your desk and keep your most valuable nozzle safe and ready to go.\u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003emoveable turret\u003c\/li\u003e\n\u003cli\u003emoveable\/tiltable gun; nozzle snaps in place\u003c\/li\u003e\n\u003cli\u003ewheels behind the tracks for movement on soft surfaces (optional)\u003c\/li\u003e\n\u003cli\u003esimplified details, specifically made for easy, quality print\u003c\/li\u003e\n\u003cli\u003eno supports required, the model comes pre-supported (turret and wheels, use the prepared tabs to pull them off; the support z distance is 0.25mm)\u003c\/li\u003e\n\u003cli\u003eprinted in parts, made for easy assembly: body, rollers, tracks, gun mount, turret and center pin (connects the body and the turret)\u003c\/li\u003e\n\u003cli\u003eno hardware required! The big parts are snap in place, and the rollers are fixed with 2 pieces of filament (2 35mm pieces or 4 smaller ones), that get covered with the 4 pins\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003eDesign notes\u003c\/strong\u003e\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e75x40x35mm, roughly 1:90 scale\u003c\/li\u003e\n\u003cli\u003ehex gun socket sized to hold M6 nozzles, designed around the Ender 3 V3 KE nozzle\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003e \u003c\/h4\u003e\u003ch4\u003e\u003cstrong\u003eBEFORE PRINTING!\u003c\/strong\u003e\u003c\/h4\u003e\u003cp\u003ePrint the gun mount, and check how the nozzle fits inside. According to that, scale the rest of the tank. Assuming a well calibrated printer, no scaling should be done.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003ePrint settings\u003c\/strong\u003e\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ematerial: personal preference (Sunlu PLA+\/2.0 , Grey, Black, Olive)\u003c\/li\u003e\n\u003cli\u003elayer height: 0.20mm\u003c\/li\u003e\n\u003cli\u003einfill: 10% (cubic)\u003c\/li\u003e\n\u003cli\u003ewalls: 2\u003c\/li\u003e\n\u003cli\u003ewall printing sequence: outer-inner (important!)\u003c\/li\u003e\n\u003cli\u003esupports: no\u003c\/li\u003e\n\u003cli\u003ebrim: depending on the 1st layer your printer lays\u003c\/li\u003e\n\u003cli\u003eprint orientation: print as given\u003c\/li\u003e\n\u003cli\u003etolerances: typical FDM tolerance, slightly looser 0.25mm\u003c\/li\u003e\n\u003cli\u003eturret modifier (7mm tall): 40% infill, 4 walls\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003eAssembly\u003c\/strong\u003e\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eprint the parts\u003c\/li\u003e\n\u003cli\u003eremove the supports by the tabs (turret and wheels - if printed)\u003c\/li\u003e\n\u003cli\u003esnap the gun mount into the turret, aligning the ridges with the pins\u003c\/li\u003e\n\u003cli\u003einsert the nozzle into the hexagonal hole of the gun mount\u003c\/li\u003e\n\u003cli\u003esnap the center pin into the turret and press the assembly into the body\u003c\/li\u003e\n\u003cli\u003einsert (straightened) filament pieces thru the rollers and the body, leaving about 2mm on each side\u003c\/li\u003e\n\u003cli\u003epush the 4 pins to cover the filament ends\u003c\/li\u003e\n\u003cli\u003epress the tracks on the rollers (they have been oriented so there is the possibility of using the bed's texture as the front of the tracks)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eSpecial thanks to \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.printables.com\/@Atomique13\"\u003e@Atomique13\u003c\/a\u003e and \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.printables.com\/@ibengr\"\u003e@Ben\u003c\/a\u003e for ideas and testing \u0026lt;3\u003c\/p\u003e\u003cp\u003eDesign by Klipperboi on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67391425904944,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_debc8d6d-1b9c-4fb7-8104-9bcacc353679.png?v=1784750822","url":"https:\/\/mymadmanlab.com\/products\/kv-2-nozzle-holder-1","provider":"Mymadmanlab.com","version":"1.0","type":"link"}