{"product_id":"magic-the-gathering-commander-deckbox-with-toploader-slot-fits-single-and-double-sleeved","title":"Magic The Gathering Commander Deckbox With Toploader Slot (Fits single and double sleeved)","description":"\u003cp\u003eDeck Box for Magic The Gathering Commander Deck, with a commander in top-loader. Designed to be printed in three pieces: the box, and two pieces for the lid. \u003c\/p\u003e\u003cp\u003eThe pieces of the lid should be glued together using any kind of plastic safe adhesive. To do this best I've found you should first lightly sand down the surfaces of the pegs on the bottom lid part, and then apply glue to the four peg holes as well as the thin channels on the top piece of the lid. Apply pressure with weight (I use filament boxes) for a period of time to ensure a snug fit. \u003c\/p\u003e\u003cp\u003eOnce assembled, the top-loader holding your commander should be able to slide right in, giving you a view of your commander once in the box, so you don't lose track of which box is for what deck.\u003c\/p\u003e\u003cp\u003eYou'll need 10 3x8 mm magnets (I'll add a link at the bottom for the ones I buy off amazon). 5 go in the lid, and 5 go in the box for the holes of that size. Place them accordingly so that the lid will stay in place when in the slot. Some glue may be required, but magnets should be a press fit.\u003c\/p\u003e\u003cp\u003eThe lid is meant to simply slide into the slot in the box once the top-loader is placed in, so that the lid needs some force to pull out, and your commander stays nice and neat in the lid. The box itself can fit 100 single or double sleeved cards, with some room for tokens.\u003c\/p\u003e\u003cp\u003eThis is what I use for my personal collection of decks and for the 6 months I've used them, they've served me perfectly well.\u003c\/p\u003e\u003cp\u003eThe print profiles I've attached are for very generic catch all settings for Bambu Basic PLA, you probably will have to edit settings slightly for your preferences and filament. I opt to not use a brim on the box to leave a cleaner edge, so there will be a slight amount of curling on the corners if you use my settings. Happy printing, and let me know if you have any comments\/concerns.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eAmazon link for magnets: \u003ca target=\"_blank\" href=\"https:\/\/www.amazon.com\/dp\/B07B3SDRCP?psc=1\u0026amp;ref=ppx_yo2ov_dt_b_product_details\" rel=\"nofollow noopener\"\u003ehttps:\/\/www.amazon.com\/dp\/B07B3SDRCP?psc=1\u0026amp;ref=ppx_yo2ov_dt_b_product_details\u003c\/a\u003e \u003c\/p\u003e\u003cp\u003eHome depot link for super glue I use: \u003ca target=\"_blank\" href=\"https:\/\/www.homedepot.com\/p\/Loctite-Super-Glue-0-14-oz-Ultra-Gel-Control-Clear-Applicator-each-1363589\/202020461\" rel=\"nofollow noopener\"\u003ehttps:\/\/www.homedepot.com\/p\/Loctite-Super-Glue-0-14-oz-Ultra-Gel-Control-Clear-Applicator-each-1363589\/202020461\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eDesign by TheShadowFTW on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67408998334768,"sku":"MW-242306","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_c242a194-d197-4d7c-aeb2-c69bbb5ade28.png?v=1785239066","url":"https:\/\/mymadmanlab.com\/products\/magic-the-gathering-commander-deckbox-with-toploader-slot-fits-single-and-double-sleeved","provider":"Mymadmanlab.com","version":"1.0","type":"link"}