{"product_id":"magnetic-watch-strap-20mm-and-22mm","title":"Magnetic Watch Strap (20mm and 22mm)","description":"\u003cp\u003e\u003cstrong\u003eEnglish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThis updated project includes an optimized version in which the chain links of the outer bracelet are slightly longer to achieve better overlap of the individual magnets during the bending process.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cu\u003eImportant\u003c\/u\u003e: When slicing, a pause is defined at layer 45 to insert the spring bars.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eA pipe wrench should be used to press in the magnets. Before pressing in the magnet, it is recommended to apply a small drop of resin adhesive to the recesses. ABS, PTEG, and PLA+ are all transparent to UVA rays, so curing with a UV flashlight is also possible at the bottom of the magnets without any problems.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eIt is also recommended to use ABS or PETG, or possibly PLA+. Pure PLA did not work for me; in most cases, the joints failed after some stress.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eA three-layer version allows printing with material combinations (PLA\/PETG\/PLA or, for example, TPU\/PETG\/TPU).\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cu\u003eNote\u003c\/u\u003e: Pay close attention to the correct polarity of the magnets.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eMagnets for the watch strap (4x1mm, 20 pieces): https:\/\/www.amazon.de\/dp\/B0CH1228D8?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_9\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eSpring bars: https:\/\/www.amazon.de\/dp\/B0DX75MYP7?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1\u0026amp;th=1\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe attached ZIP file contains the original Plasticity file, which makes it easy to modify the print object.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDeutsch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDieses aktualisierte Projekt umfasst eine optimierte Version, bei der die Kettenglieder des äußeren Armbands etwas länger sind, um eine bessere Überlappung der einzelnen Magnete während des Biegevorgangs zu erreichen.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cu\u003eWichtig\u003c\/u\u003e: Beim Schneiden wird bei Schicht 45 eine Pause definiert, um die Federstifte einzusetzen.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eZum Eindrücken der Magnete sollte eine Rohrzange verwendet werden. Vor dem Eindrücken des Magneten empfiehlt es sich, einen kleinen Tropfen Harzkleber in die Aussparungen aufzutragen. ABS, PTEG und PLA+ sind alle für UVA-Strahlen durchlässig, sodass auch die Aushärtung mit einer UV-Taschenlampe an der Unterseite der Magnete problemlos möglich ist.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eEs wird außerdem empfohlen, ABS oder PETG oder möglicherweise PLA+ zu verwenden. Reines PLA hat bei mir nicht funktioniert; in den meisten Fällen versagten die Verbindungen nach einiger Beanspruchung.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eEine dreischichtige Version ermöglicht den Druck mit Materialkombinationen (PLA\/PETG\/PLA oder beispielsweise TPU\/PETG\/TPU).\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cu\u003eHinweis\u003c\/u\u003e: Achten Sie genau auf die richtige Polarität der Magnete.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eMagnete für das Armband (4 x 1 mm, 20 Stück): \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.amazon.de\/dp\/B0CH1228D8?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_9\"\u003ehttps:\/\/www.amazon.de\/dp\/B0CH1228D8?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_9\u003c\/a\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eFederstege: \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.amazon.de\/dp\/B0DX75MYP7?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1\u0026amp;th=1\"\u003ehttps:\/\/www.amazon.de\/dp\/B0DX75MYP7?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1\u0026amp;th=1\u003c\/a\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDie angehängte ZIP-Datei enthält die Original-Plasticity-Datei, mit der sich das Druckobjekt leicht modifizieren lässt.\u003c\/p\u003e\u003cp\u003eDesign by mamekudz on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67397267489072,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_98e04020-ea4b-441f-8d03-64a190db6030.png?v=1784864875","url":"https:\/\/mymadmanlab.com\/products\/magnetic-watch-strap-20mm-and-22mm","provider":"Mymadmanlab.com","version":"1.0","type":"link"}