{"product_id":"mailbox-flags-outgoing-and-incoming","title":"Mailbox Flags (Outgoing and Incoming)","description":"\u003ch2\u003e\u003cstrong\u003eIncoming and Outgoing Mailbox Flags\u003c\/strong\u003e\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRecommendations\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFilament: PETG \/ ASA\u003c\/li\u003e\n\u003cli\u003eButton M3 Screws\u003cul\u003e\n\u003cli\u003e15mm for use with adhesives\u003c\/li\u003e\n\u003cli\u003e20mm for use with Heat Inserts \/ Nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e(Optional) Adhesive \/ Tape\u003c\/li\u003e\n\u003cli\u003e(Optional) M3 Heat Inserts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePrinting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBase w\/ Magnets \u0026amp; Flag w\/ Magnets\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe print profile is set to pause at layer 20 to allow the insertion of the 6x3 magnets. The magnets have been defined as a negative space on the parts.\u003c\/p\u003e\u003cp\u003eMake sure the polarity is the same for all magnets. A trick is to stack the magnets and press the stack into the holes one by one.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003ci\u003eNote: To ensure good layer adhesion, make sure to insert the magnet and resume the print as quickly as possible.\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBase w\/o Magnets \u0026amp; Flag w\/o Magnets\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe magnets have been omitted from the labeled parts.\u003cbr\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAssembly\u003c\/strong\u003e\u003c\/p\u003e\u003cfigure class=\"table\" style=\"width:100%;\"\u003e\u003ctable style=\"background-color:#e8e7ee;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1.0px solid #000000;height:218.0px;padding:4.0px;vertical-align:top;width:225.0px;\"\u003e\n\u003ch2\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eLay the base smooth side down.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"border:1.0px solid #000000;height:218.0px;padding:4.0px;vertical-align:top;width:225.0px;\"\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/776490\/2024-03-23_67751b0d8c1f58.png\" alt=\"pastedGraphic.png\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1.0px solid #000000;height:218.0px;padding:4.0px;vertical-align:top;width:225.0px;\"\u003e\n\u003ch2\u003e2\u003c\/h2\u003e\n\u003cp\u003ePlace the flag onto of the base by aligning the hole in the flag with the post on the base.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe handle should be placed facing upwards.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"border:1.0px solid #000000;height:218.0px;padding:4.0px;vertical-align:top;width:225.0px;\"\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/776490\/2024-03-23_6d96ec3d2b924.png\" alt=\"pastedGraphic_1.png\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1.0px solid #000000;height:218.0px;padding:4.0px;vertical-align:top;width:225.0px;\"\u003e\n\u003ch2\u003e3\u003c\/h2\u003e\n\u003cp\u003ePlace the top plate on the top of the assembly by aligning the center and corner holes with the hole on the center post and the base plate corner hole.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"border:1.0px solid #000000;height:218.0px;padding:4.0px;vertical-align:top;width:225.0px;\"\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/776490\/2024-03-23_045c94378ea8d.png\" alt=\"pastedGraphic_2.png\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1.0px solid #000000;height:218.0px;padding:4.0px;vertical-align:top;width:225.0px;\"\u003e\n\u003ch2\u003e4\u003c\/h2\u003e\n\u003cp\u003eInsert two screws gently screwing them in until they are flush with the table \/ base.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBe careful not to over tighten.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"border:1.0px solid #000000;height:218.0px;padding:4.0px;vertical-align:top;width:225.0px;\"\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/776490\/2024-03-23_7545db81999428.png\" alt=\"pastedGraphic_3.png\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd style=\"border:1.0px solid #000000;height:143.0px;padding:4.0px;vertical-align:top;width:459.0px;\" colspan=\"2\"\u003e\n\u003ch2\u003e5\u003c\/h2\u003e\n\u003cp\u003eFinally, align with mailbox and mark the screw holes on the mailbox.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlastic Mailbox Installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConsider using an M3 heat insert to secure the M3 screws.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIf you do not have M3 heat inserts, consider using shorter M3 screws and an adhesive tape.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMetal Mailbox Installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDrill a hole slightly smaller than the M3 screw and gently screw the screws in until they thread into the metal.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIf you do not wish to drill a hole in the mailbox, consider using shorter M3 screws and adhesive tape.\u003c\/p\u003e\n\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/figure\u003e\u003cp\u003e\u003cbr\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003e \u003c\/p\u003e\u003cp\u003eDesign by Morlee on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367161364784,"sku":null,"price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_6f826cf3-a377-4689-b317-09b5b44992b8.png?v=1784010397","url":"https:\/\/mymadmanlab.com\/products\/mailbox-flags-outgoing-and-incoming","provider":"Mymadmanlab.com","version":"1.0","type":"link"}