{"product_id":"multiboard-hsw-offset-26mm-paint-rack-6-bottles","title":"Multiboard\/HSW Offset 26mm Paint Rack - 6 bottles","description":"\u003cp\u003eA 6 bottle paint holder, designed to work with the \u003ca target=\"_blank\" href=\"https:\/\/www.multiboard.io\/\" rel=\"nofollow noopener\"\u003eMultiboard mounting system\u003c\/a\u003e. \u003cstrong\u003e\u003cu\u003e2025-01-12\u003c\/u\u003e\u003c\/strong\u003e - See update below for info about HSW mounting!\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000971887\/design\/910488bf-77d9-451b-bd14-b8595b897b27.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003eInspired by \u003ca target=\"_blank\" href=\"https:\/\/thangs.com\/designer\/ronald.marvin\/3d-model\/Army%20Painter%2FVallejo%20Paint%20Bottle%20Rack%20Multiboard-991282\" rel=\"nofollow noopener\"\u003eronald.marvin's take on a 26mm paint rack\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe space I had for mounting my paints on the side of my hobby shelf only allowed for the use of 6x6 Multiboard tiles next to each other which the above paint rack didn't allow, so I needed to design something with an offset.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRack Orientation: \u003c\/strong\u003eIf you are looking at a 2-wide 6x6 Multiboard, the .stls as uploaded are modeled to work on the left panel (and overhang slightly off the left edge). To get them for the right side, simply mirror along the X-axis. You can fit two racks per 6x6 tile and still have easy access to the bottles. Uploaded 3mf files have 3 “left mounting” and 3 “right mounting” paint holders on the plate.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePrint Details - Settings: \u003c\/strong\u003eFiles are printed flat on the base with no supports. 2 perimeters, 10% infill is fine. Feel free to use your choice of material. All the prints above were completed using Bambu's Matte White PLA.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003e2025-01-12 Update\u003c\/u\u003e\u003c\/strong\u003e - Added a version of the paint rack with a multiconnect cleat at Serps request. Multiconnect version \u003ci\u003e\u003cstrong\u003erequires \u003c\/strong\u003e\u003c\/i\u003esupports when printing with the pots flat on the build plate. Now that there's a Multiconnect version, it could be used on HSW using the Multiconnect mounts \u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/model\/987886-multiconnect-honeycomb-storage-wall-hsw-connector\" rel=\"nofollow noopener\"\u003elocated here\u003c\/a\u003e. See comments for photos of the multiconnect piece.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThese paint racks were designed with The Army Painter's Warpaints Fanatic set in mind, hence the cutout dipping down to allow viewing of the paint's spot in the flexible triad system. The outer walls were also lowered to allow visibility of the name of the paint.\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000971887\/design\/fa0cb54b-70bc-4426-a4c5-b95b52309976.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThere are two different versions included. One has “longer mounts” which can be used with the standard \u003ca target=\"_blank\" href=\"https:\/\/thangs.com\/designer\/Multiboard\/3d-model\/15%2520mm%252C%2520Pegboard%2520Click%2520Hook-973888\" rel=\"nofollow noopener\"\u003eMultiboard 15mm peg hooks\u003c\/a\u003e or a “shorter mounts” version which can be used with the \u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/model\/749809-multiboard-hook-pin\" rel=\"nofollow noopener\"\u003eMultiboard hook pins by Kunzite\u003c\/a\u003e. The Multiboard hook pins will work in the “longer mount” model, but the 15mm peg hooks \u003ci\u003e\u003cstrong\u003ewill not\u003c\/strong\u003e\u003c\/i\u003e work in the “shorter mount” model. The mounting positions are 100mm center-to-center so they span 5 of the peg hook holes on a Multiboard tile.\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000971887\/design\/e6f5b3a8-c6db-4358-a30d-62fa363a9f59.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003eIn the above picture, the “longer mount” version is pictured with the Multiboard 15mm peg hook on the left, and the “shorter mount” version is pictured with Kunzite's hooks on the right.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eMy layout was done with the majority in the “shorter mount” version, although there's a bit of a mix.\u003c\/p\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000971887\/design\/5c4a3103-8ffa-4634-b0eb-85d1c094f347.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003e“Shorter mount” version can be seen up top, “longer mount” version is on the bottom. Both racks to the right are “shorter mount” versions.\u003c\/p\u003e\u003cp\u003eDesign by Agreschn on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67383285416240,"sku":null,"price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_b1526339-9e97-427d-8abc-5399104f5bbe.png?v=1784496412","url":"https:\/\/mymadmanlab.com\/products\/multiboard-hsw-offset-26mm-paint-rack-6-bottles","provider":"Mymadmanlab.com","version":"1.0","type":"link"}