{"product_id":"nfc-tag-keychains","title":"NFC Tag Keychains","description":"\u003cp\u003eCollection of NFC Tag Keychains available in 3 shapes:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003enfc-tag-teardrop: a 38 × 30 mm teardrop tag\u003c\/li\u003e\n\u003cli\u003enfc-tag-rectangle: a 36 × 30 mm rectangle tag\u003c\/li\u003e\n\u003cli\u003enfc-tag-square: a 32.4 × 32.4 mm square tag\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEach tag has a threaded slot in the back made to accommodate both an NFC tag as well as the the nfc-tag-screw model which can be screwed in or out using a coin (less than 2 mm wide). The pocket left once closed in 0.6 mm high allowing you to use either a 25 mm NFC sticker or a 25mm NFC PVC card.\u003c\/p\u003e\u003ch4\u003eAssembly\u003c\/h4\u003e\u003cfigure class=\"image image-style-align-center\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000495976\/design\/2024-06-11_11rtvy9vxw0u.jpg\"\u003e\u003c\/figure\u003e\u003cp\u003eTo build a complete tag you will need to print one of the body model (either teardrop, rectangle or square) as well as a screw model. Once you have them both and depending on if you are using a 25 mm PVC card or a sticker you should either:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePut your PVC card into the recess and screw in the back part using a coin\u003c\/li\u003e\n\u003cli\u003eStick your tickers either in the recess on the body or to the screw before closing it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003ePrinting\u003c\/h4\u003e\u003cp\u003eDepending on the tolerance of your printer \u003cstrong\u003eyou might need to adjust the scale of the screw \u003c\/strong\u003e(nfc-tag-screw.stl) to 99 or 98% if the fit is too tight. Other any of the model should be printed using the following recommended settings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" href=\"https:\/\/help.prusa3d.com\/article\/layers-and-perimeters_1748#layer-height\" rel=\"nofollow noopener ugc\"\u003eLayer Height\u003c\/a\u003e: 0.1mm (up to 0.2mm though screw tolerance might be worse)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" href=\"https:\/\/help.prusa3d.com\/article\/infill_42#fill-density\" rel=\"nofollow noopener ugc\"\u003eInfill\u003c\/a\u003e: 100%\u003c\/li\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" href=\"https:\/\/help.prusa3d.com\/article\/support-material_1698\" rel=\"nofollow noopener ugc\"\u003eRaft \/ Supports \/ Brim\u003c\/a\u003e: no\u003c\/li\u003e\n\u003cli\u003e\n\u003ca target=\"_blank\" href=\"https:\/\/help.prusa3d.com\/article\/seam-position_151069\" rel=\"nofollow noopener ugc\"\u003eSeam position\u003c\/a\u003e: Aligned (recommended)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDesign by orax on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367584891184,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_efd52da2-acdc-4c98-b580-9d5ac0805e3c.jpg?v=1784015586","url":"https:\/\/mymadmanlab.com\/products\/nfc-tag-keychains","provider":"Mymadmanlab.com","version":"1.0","type":"link"}