{"product_id":"orange-pi-zero-3-case","title":"Orange Pi Zero 3 Case","description":"\u003cp\u003eThis is my attempt at making a case for my orange pi zero 3. I had printed the case at \u003ca href=\"https:\/\/www.printables.com\/model\/542569-orange-pi-zero-3-case\" rel=\"nofollow\"\u003ehttps:\/\/www.printables.com\/model\/542569-orange-pi-zero-3-case\u003c\/a\u003e but I didn't like the supports that were required in the tiny holes. I also didn't really love the antenna holder design as it was a bit hard to remove the antenna. Finally, it didn't fully expose the USB pins. So, I designed my own case in fusion 360 with some inspiration from that design. After 6 iterations, I arrived at this design. I have sliced both with 0.3 first layer heights and .2 layer heights. You MUST slice these models with a .2 millimeter layer height or the support free part won't work. I used PLA, but if your chip gets really hot you might want PETG or ABS\/ASA. I dont know if you can go bigger than 0.4mm - The hexagon pattern has 0.8mm walls, so I see no reason why it couldn't go up to 0.8mm. I have not tested that though. \u003c\/p\u003e\u003cp\u003eDesign by Vanilla on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67399911833904,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_48124cd0-5e45-4578-a4c7-a18769291535.jpg?v=1784916221","url":"https:\/\/mymadmanlab.com\/products\/orange-pi-zero-3-case","provider":"Mymadmanlab.com","version":"1.0","type":"link"}