{"product_id":"osbmx-v2-open-source-button-lp-v2-24mm-30mm","title":"OSBMX v2 - Open Source Button LP v2 - 24mm + 30mm","description":"\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e!!!WARNING!!!\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eI am not responsible for prints that do not turn out as intended or any damages that occur as a result of installation or usage of these buttons.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e!!!WARNING!!!\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eThere are a growing number of Choc v2 LP switches coming onto the market. For the purposes of this project I focused on \u003c\/span\u003e\u003cspan style=\"color: #ce9178\"\u003e`Kailh Red`\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e switches. While you may be able to use all sorts of other switches in these, I cannot guarantee that any other switches will work. It is highly recommended to try a switch or two out to ensure proper operation before buying a ton of them.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e!!!WARNING!!!\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eThese buttons are not compatible with SiTong caps. I may work on a remix that is.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e!!!WARNING!!!\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eThese take brand new boards. You will not be able to use board from the OSBMX v2.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e!!!WARNING!!!\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eThis button requires printed supports.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e!!!WARNING!!!\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #cccccc\"\u003e---\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #569cd6\"\u003e\u003cstrong\u003e## Attribution\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eThe following text must be included in any distribution of derivatives of this project or the boards. All links must also be included.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eBased on the OSBLP v2 by TheTrain.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eCopyright © 2025 [\u003c\/span\u003e\u003cspan style=\"color: #ce9178\"\u003eTheTrain\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e](\u003cu\u003ehttp:\/\/x.com\/thetrain24\u003c\/u\u003e)\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e[\u003c\/span\u003e\u003cspan style=\"color: #ce9178\"\u003eLicensed under CC BY 4.0\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e](\u003cu\u003ehttps:\/\/creativecommons.org\/licenses\/by\/4.0\/\u003c\/u\u003e)\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eChanges from the original design:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e list any changes you make here\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eAnyone selling this commercially must include in the listing that this is an open source item, link to the original repo and include the copyright as well as the link to my X account.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e---\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #569cd6\"\u003e\u003cstrong\u003e## Summary\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eThe OSBLP v2 was designed from scratch in Fusion360 based on the OSBMX v2.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eWe have seen a growing number of low profile switch buttons in the last few years and this is an open source button to go along with them.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #cccccc\"\u003eThere are now much more affordable and high quality options available commercially like the SiTong MX and LP buttons.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eThe OSBLP v2 is focused simply on 3D printing though home FDM printers. These have not been tested through services like JLCPCB in materials like MJF, SLS or resin. I may add some remixes that are more suitable to those materials in the future.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eIf you are planning to use these with the PCB included in the repo please be sure to research which switches will and will not work. I am unable to answer questions on individual switch compatibility.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003ePlease note that these buttons can also be used without the circuit board as the main housing of the button will hold the LP switches just fine. You can then use a hot swap connector directly or just solder to the LP switches. It is recommeded to use a PCB.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eA massive thank you to LayerShift (https:\/\/x.com\/Layer_Shift) for helping get the Fusion360 model all cleaned up on the OSBMX v2 which was used as the base for the OSBLP v2.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e---\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #569cd6\"\u003e\u003cstrong\u003e## Board design choices\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eThere is a new PCB design for the OSBLP v2.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eThe new PCB design combines the three most common methods of connection into one board:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e 2.8mm prong connector\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e Solder pads\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e PH2.00mm 2pin connector\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e---\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #569cd6\"\u003e\u003cstrong\u003e## Assembly\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #cccccc\"\u003eAssembly is quite straight forward on this board. All that is needed is to solder the hot swap socket on and, if you choose, the 2.4mm or PH2.00mm 2pin connector(s)\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eParts necessary for assembly of the PCBs:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e1 x PCB\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e1 x LP hot swap socket (https:\/\/www.aliexpress.com\/item\/1005006625852715.html)\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e1 x PH2.00mm 2pin vertical SMD connector (if connecting that way) (https:\/\/www.aliexpress.com\/item\/1005006027334406.html)\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e2 x 2.8mm prong connectors (if connecting that way) (https:\/\/www.aliexpress.com\/item\/1005002539360973.html) (Type: DJ610-2.8-2)\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e2 x M2 5mm Hex Hexagon Socket Cap Head Self Tapping Screws (https:\/\/www.aliexpress.com\/item\/10000350027047.html)\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eParts necessary for assembly of 3D printed button:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e1 x OSBLP v2 Plunger\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e1 x OSBLP v2 Rim\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e1 x OSBLP v2 Main Body\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e1 x OSBLP v2 Nut\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #cccccc\"\u003eOptionally you can also print a matching wrench to help with tightning and untighning.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eYou will also need a Choc v2 LP switch to complete the button.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eNot all switches have been tested, there may be some that do not follow the above rules.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e---\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #569cd6\"\u003e\u003cstrong\u003e## How to order a PCBs:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eAll of the boards so far have been ordered though JLCPCB. Due to the size of the boards you can order quite a lot at very low cost. I was able to order 125 of them and still meet their minimum shipping cost limits. You do not need to get this many. I have also opted not to do a panel for this since it appears to still be cheaper to get these done individually. Also please note that recently JLCPCB changed some of their prices for the PCB color, ensure you choose a color like black or green to get the lowest possible cost.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e1 - Go to JLCPCB.com\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e2 - Click on \u003c\/span\u003e\u003cspan style=\"color: #ce9178\"\u003e`Instant Quote`\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e3 - Click on \u003c\/span\u003e\u003cspan style=\"color: #ce9178\"\u003e`Add Gerber file`\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e and choose the file named \u003c\/span\u003e\u003cspan style=\"color: #ce9178\"\u003e`Gerber - OSBLP v2.0 multi-connector.zip`\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e4 - Choose the following options for the board:\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e Base Material = FR-4\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e Layers = 2\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e Dimensions = (should auto-populate) 22 * 14 mm\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e PCB Qty = 100\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e Product Type = Industrial\/Consumer electronics\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e Deburring\/Edge Rounding = Yes\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e Different Design = 1\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e Delivery Format = Single PCB\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e PCB Thickness = 1.6\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e PCB Color = (up to you)\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e Silkscreen = (defaults to white for all except white boards which is black)\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e Surface Finish = HASL(with lead)\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e Outer Copper Weight = 1oz\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e Via Covering = Tented\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e Min via hole size\/diameter = 0.3mm\/(0.4\/0.45mm)\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e Board Outline Tolerance = +\/- 0.2mm(Regular)\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e Confirm Production file = No\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e Mark on PCB = Remove\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e Flying Probe Test = Fully Test\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e Gold Fingers = No\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e Castellated Holes = No\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e Edge Plating = No\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e No advanced options\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e5 - Click on \u003c\/span\u003e\u003cspan style=\"color: #ce9178\"\u003e`SAVE TO CART`\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e6 - Go through checkout process, ensure to select economic shipping to keep costs low\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e---\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #569cd6\"\u003e\u003cstrong\u003e## How to print the OSBLP v2:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eA .3MF file is included which can be loaded into most slicers with a set of my recommended settings.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eTo make each button you will need:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e1 x OSBLP v2 Plunger\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e1 x OSBLP v2 Rim\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e1 x OSBLP v2 Main Body\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e1 x OSBLP v2 Nut\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\u0026lt;\u003c\/span\u003e\u003cspan style=\"color: #569cd6\"\u003ebr\u003c\/span\u003e\u003cspan style=\"color: #808080\"\u003e\/\u0026gt;\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eThe rim should be printed flat side down. The nut should also be printed flat side down.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eYou will need supports for these buttons.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eIt is recommended to print at the lowest print layer height your printer can do.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eI have extensively printed and tested these on my BambuLabs X1C and P1S using both a 0.4mm and 0.2mm nozzle on normal and matte PLA.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eThe recommended print setting are to do 4-6 wall loops and then enough top and bottom laters to have solid infill.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eYou may need to adjust to achieve a good print on your own printer.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cspan style=\"color: #cccccc\"\u003e!!!Please note - I am not responcible for missprints or any costs incured from missprints!!!\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e---\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #569cd6\"\u003e\u003cstrong\u003e## Other stuff\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eThe original jig file from the OSBMX v2 will no longer work. I do not have immediate plans to make a new jig.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e---\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #569cd6\"\u003e\u003cstrong\u003e## Donations\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eEvery part of this project is open source, all prototyping costs were covered out of pocket.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eDonations are not necessary but always welcome! All received donations go into trying new things and ordering new boards for this and other projects.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003ehttps:\/\/www.paypal.com\/donate\/?hosted_button_id=2JMTZVCGLDYC2\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003e---\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003eRevision History:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003ev2.0\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e Conversion to LP design\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #cccccc\"\u003ev1.0\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #6796e6\"\u003e-\u003c\/span\u003e\u003cspan style=\"color: #cccccc\"\u003e Original OSBMX design\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eDesign by TheTrain on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67448922439984,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_978c48aa-b3fa-4b59-b52f-34959be63d53.png?v=1785823086","url":"https:\/\/mymadmanlab.com\/products\/osbmx-v2-open-source-button-lp-v2-24mm-30mm","provider":"Mymadmanlab.com","version":"1.0","type":"link"}