{"product_id":"panel-lift-handle-for-voron-inverted-electronics","title":"Panel Lift Handle for Voron Inverted Electronics","description":"\u003cp\u003eThis is a handle that you can attach to the inside bottom panel of your Voron Trident when you do the Inverted Electronics mod.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eUse VHB tape to stick this to your panel.\u003c\/p\u003e\u003cp\u003eIt's short enough that it will sit below the bed plate, but make sure that you sit it far enough forward that it will clear the bed support bar, or else you'll crash your bed. The front of the handle should be around the front edge of your acrylic panel.\u003c\/p\u003e\u003ch2\u003ePrinting\u003c\/h2\u003e\u003cp\u003ePrint with the hexagon face on the print bed. This is the display face and if you're doing a logo, should be where the logo goes. The overhand should be calibrated to not require any supports.\u003c\/p\u003e\u003cp\u003eThe 3mf file has the voron logo already set up on it, but if you import the STEP file, you can use your own text or svg logo instead.\u003c\/p\u003e\u003ch2\u003eModification\u003c\/h2\u003e\u003cp\u003eDesigned in OnShape. You can export or modify the design \u003ca target=\"_blank\" href=\"https:\/\/cad.onshape.com\/documents\/367081607d5c4a5c2598f6a2\/w\/0b7c3fe82893432558b87a6c\/e\/2095828cf8acdccffaf66ffc?renderMode=0\u0026amp;uiState=673292d8fe97656d7ddeeec6\" rel=\"nofollow noopener\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eMulti-Color\u003c\/h2\u003e\u003ch3\u003eAMS\u003c\/h3\u003e\u003cp\u003eObvs the easy button is to use a MMU such as Bambu AMS, Prusa MMU, or Klipper's various solutions such as Boxturtle, ERCF, or a toolchanger like Stealth Changer.\u003c\/p\u003e\u003ch3\u003eManual\u003c\/h3\u003e\u003cp\u003eIf you don't have a MMU or toolchanger available, then there's a technique mentioned \u003ca target=\"_blank\" href=\"https:\/\/docs.vorondesign.com\/community\/howto\/mikhail\/multi-colour-prints-with-a-single-nozzle.html\" rel=\"nofollow noopener\"\u003ein the Voron docs\u003c\/a\u003e for splitting the print into two separate prints on the same plate in your slicer.  Below is my take on this technique but the docs approach it slightly differently and with less requirements.  The trick requires that you \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ehave your print_start macro set to \u003ca target=\"_blank\" href=\"https:\/\/ellis3dp.com\/Print-Tuning-Guide\/articles\/useful_macros\/conditional_homing.html\" rel=\"nofollow noopener\"\u003econditionally home\u003c\/a\u003e and \u003ca target=\"_blank\" href=\"https:\/\/ellis3dp.com\/Print-Tuning-Guide\/articles\/useful_macros\/conditional_qgl.html\" rel=\"nofollow noopener\"\u003econditionally level\/qgl\/zta\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003enot have any leveling instructions in your slicer's print start\u003c\/li\u003e\n\u003cli\u003edon't disable your steppers during print end\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTo do this technique\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eIn the assembly for the two parts (body and svg inlay, changed from modifier), set the handle body to be a negative part and the inlay to be a part.  This should leave only the inlay to print.\u003c\/li\u003e\n\u003cli\u003eSlice and export the plate.\u003c\/li\u003e\n\u003cli\u003eSet a z-hop that will clear the inlay model (so probably like 0.6 or something for a 0.4mm inlay).\u003c\/li\u003e\n\u003cli\u003eChange the inlay to be a negative part and set the handle body to be a part so that only the handle body will print (make sure it has a cut out from the inlay).\u003c\/li\u003e\n\u003cli\u003eExport the plate again, now with the gcode for the handle body.\u003c\/li\u003e\n\u003cli\u003eOn your printer, load the color you want for the inlay.\u003c\/li\u003e\n\u003cli\u003ePrint the inlay, staying present to be there when the print finishes.\u003c\/li\u003e\n\u003cli\u003eClean off any purge from the first print.\u003c\/li\u003e\n\u003cli\u003eChange your filament to the handle body filament.\u003c\/li\u003e\n\u003cli\u003eQuickly start the handle body print before your printer disables the steppers or loses it's home.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eDesign by RagingRoosevelt on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67391236538672,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_443f5468-7bc5-4939-b2a6-b64e593e166d.png?v=1784745116","url":"https:\/\/mymadmanlab.com\/products\/panel-lift-handle-for-voron-inverted-electronics","provider":"Mymadmanlab.com","version":"1.0","type":"link"}