{"product_id":"parametric-cable-clip-1","title":"Parametric Cable Clip","description":"\u003cp\u003eA universal, highly customizable cable clip allowing you to attach cables to walls using screws or nails of your choice, or simply bundle several cables together.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClick on “Customize” to generate your own!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003ePlease boost me if you like this model\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eI tried to choose reasonable limits for various parameters. If they do not fit your needs let me know, they are easy to change.\u003c\/p\u003e\u003ch3\u003eCustomization\u003c\/h3\u003e\u003cp\u003eCare was taken to set up parameters in such a way where minimal user intervention is required. Just enter your cable and screw diameters, number of clamps you want, and you should be all set. For special cases many more parameters are available and documented below.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eAdditionally, I provided an assortment of various clamps in the included print profile.\u003c\/p\u003e\u003ch3\u003eParameters\u003c\/h3\u003e\u003ch4\u003eMain\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003epreview\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eRenders placeholder cables and nails\u003c\/li\u003e\n\u003cli\u003eMust be disabled before exporting so you don't end up printing them\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ecable_diameter\u003c\/strong\u003e - Diameter of your cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003escrew_diameter\u003c\/strong\u003e - Diameter of your screws or nails\u003cul\u003e\u003cli\u003escrew_slop under Misc will be added to this value\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003enum_clamps\u003c\/strong\u003e - Number of connected cable clamps to generate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eclamp_depth\u003c\/strong\u003e - Depth of the cable clamp (Z axis)\u003cul\u003e\u003cli\u003eIf screw sheaths are enabled, the minimum of this value will be capped at screw sheath depth\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ewall_thickness\u003c\/strong\u003e - Thickness of the cable clamp wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eautomatic_screw_cap_diameter\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eSets screw cap diameter to double the screw diameter\u003c\/li\u003e\n\u003cli\u003eIf the screw sheath is below the top of the cable clamp this parameter will affect the diameter of the sheath so that the cap fits\u003c\/li\u003e\n\u003cli\u003eAdjust in Misc if disabled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003escrew_sheath_depth_mode\u003c\/strong\u003e - (Y axis)\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAUTO\u003c\/strong\u003e: sets screw_sheath_depth to double the wall thickness as z bonding is much lower in FDM printing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFULL\u003c\/strong\u003e: extends the sheath to the full width of the clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMANUAL\u003c\/strong\u003e: allows you to adjust the depth under Misc\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eMisc\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003escrew_cap_diameter\u003c\/strong\u003e - Diameter of your hardware's cap\u003cul\u003e\u003cli\u003eUsed only when automatic_screw_cap_diameter is disabled\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003escrew_sheath_depth\u003c\/strong\u003e - Depth of the screw sheath (Y axis)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003escrew_slop\u003c\/strong\u003e - Value that gets added to the screw_diameter\u003cul\u003e\n\u003cli\u003e As the screw hole is inflexible and FDM printing precision in the Z axis is limited this parameter ensures that your hardware will fit.\u003c\/li\u003e\n\u003cli\u003eMore slop = looser\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003echamfer_scale\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e0.0 - no chamfer\u003c\/li\u003e\n\u003cli\u003e1.0 - chamfer extends all the way to the middle of the clamp\u003c\/li\u003e\n\u003cli\u003eTo allow the screw head to fit, if the sheath is below the clamp top its diameter will be increased to account for the chamfer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eprintable_holes\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eMakes screw holes tear-shaped so that they can be printed without overhangs\u003cbr\u003e \u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDesign by kaipai on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67391377867056,"sku":null,"price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_1d746db1-0c6c-4f2a-9f30-9ea960d7b348.png?v=1784749471","url":"https:\/\/mymadmanlab.com\/products\/parametric-cable-clip-1","provider":"Mymadmanlab.com","version":"1.0","type":"link"}