{"product_id":"petg-tuned-x1c-print-profiles-for-bambu-orcaslicer","title":"PETG Tuned X1C Print Profiles for Bambu\/OrcaSlicer","description":"\u003cp\u003e\u003ci\u003eChange log:\u003c\/i\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ci\u003eAdded a PA-tuned profile for \u003cstrong\u003eBambu's PETG-CF\u003c\/strong\u003e (4\/19\/23). I usually use the Bambu presets.. but I was\/am struggling with this filament. I do not recommend it.\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eAdded \u003cstrong\u003eOverture Army Green PETG\u003c\/strong\u003e (4\/20\/23)\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eAdded \u003cstrong\u003eCalifornia Filaments Matte Black PETG\u003c\/strong\u003e (5\/2\/23)\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eAdded \u003cstrong\u003eCalifornia Filaments Golden Yellow PETG\u003c\/strong\u003e (5\/2\/23)\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eAdded \u003cstrong\u003eCalifornia Filaments Glow (clear) PETG\u003c\/strong\u003e (5\/2\/23)\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eAdded \u003cstrong\u003ePrusament Matte Black PETG\u003c\/strong\u003e (5\/6\/23)\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eRetuned \u003cstrong\u003ePrusament Galaxy Black PETG\u003c\/strong\u003e (5\/19\/23) - *updated settings.\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eRetuned\u003cstrong\u003e California Filaments Teal, Fluorescent Orange, \u0026amp; Cloudy White\u003c\/strong\u003e colors (5\/28\/23) - *updated PA Values, improves edge cases \u0026amp; wall strength.\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eAdded \u003cstrong\u003ePrusament Ocean Blue PETG\u003c\/strong\u003e (5\/29\/23)\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eAdded \u003cstrong\u003ePrusament Carmine Red PETG\u003c\/strong\u003e (6\/4\/23)\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eUpdated\/Retuned \u003cstrong\u003ePrusament Matte Black PETG\u003c\/strong\u003e \u0026amp; \u003cstrong\u003eCalifornia Filaments Clear PETG \u003c\/strong\u003e(6\/5\/23)\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eUpdated\/Retuned \u003cstrong\u003eCalifornia Filaments Yellow PETG \u003c\/strong\u003e(6\/11\/23)\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eUpdated\/Retuned A\u003cstrong\u003eMOLEN Rainbow PETG \u003c\/strong\u003e(7\/1\/23)\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eAdded \u003cstrong\u003ePrusament Chalky Blue PETG\u003c\/strong\u003e (7\/19\/23)\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eFixed a mistake in \u003cstrong\u003ePrusament Carmine Red PETG \u003c\/strong\u003emin layer time (7\/20\/23)\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eAdded \u003cstrong\u003ePrusament Yellow Gold PETG\u003c\/strong\u003e (7\/20\/23) - this filament tunes fine, but man is it an ugly color. Do not recommend unless you want the color of bile. They should've called this “diseased yellow”.\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eAdded \u003cstrong\u003ePrusament Transparent Orange PETG\u003c\/strong\u003e (7\/28\/23)\u003c\/i\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eIf you enjoy my work, feel free to boost me.  I do work hard on it and all my stuff is free!\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003ch4\u003eWhat this is:\u003c\/h4\u003e\u003cp\u003eThis is a collection of all of my PETG filament profiles for all filaments I've used of this type. I happen to have a decent amount of \u003ca target=\"_blank\" href=\"http:\/\/referrals.californiafilament.com\/rV8091rv?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjoxNTg0NzYyODA5fQ%3D%3D\" rel=\"nofollow noopener\"\u003eCalifornia Filaments\u003c\/a\u003e because I've found that brand works well with this printer, and you can push the flow rates higher with it than some others.\u003c\/p\u003e\u003cp\u003eI will update it as I tune new filament brands and colors. They are generally tuned for \u003cstrong\u003eflow rate\u003c\/strong\u003e, \u003cstrong\u003epressure advance\u003c\/strong\u003e, and \u003cstrong\u003etemperature \u003c\/strong\u003eand \u003cstrong\u003evolumetric flow limits \u003c\/strong\u003eand \u003cstrong\u003eoverrides\u003c\/strong\u003e. They're a good working starting point for anyone struggling with a filament. I've also tuned other types of filaments (see \u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/@AdamL\/models\" rel=\"nofollow noopener\"\u003emy models here\u003c\/a\u003e) and you should find, by category:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/model\/457260-tpuflexible-tuned-x1c-print-profiles-for-bambuorca\" rel=\"nofollow noopener\"\u003eTPU \/ Flexibles\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/model\/457284-panylon-tuned-x1c-print-profiles-for-bambuorca-sli\" rel=\"nofollow noopener\"\u003eNylon\/PA and PACF variants\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/model\/457321-pc-tuned-x1c-print-profiles-for-bambuorca-slicer\" rel=\"nofollow noopener\"\u003ePolycarbonate \u0026amp; Polycarbonate-CF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/model\/457248-pla-tuned-x1c-print-profiles-for-bambuorca-slicer\" rel=\"nofollow noopener\"\u003ePLA \/ PLA + \/ Silk PLA\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/model\/457271-absasa-tuned-x1c-print-profiles-for-bambuorca-slic\" rel=\"nofollow noopener\"\u003eABS \/ ASA\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCHT-Nozzle versions also available\u003c\/strong\u003e (0.4 mm , Brass)\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/model\/539704-chtnozzlepetg-tuned-x1c-print-profiles-for-bambuor\" rel=\"nofollow noopener\"\u003ePETG\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/model\/540552-chtnozzlepla-tuned-x1c-print-profiles-for-bambuorc\" rel=\"nofollow noopener\"\u003ePLA\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/model\/542033-chtnozzletpu-tuned-x1c-print-profiles-for-bambuorc\" rel=\"nofollow noopener\"\u003eTPU\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/model\/542058-chtnozzle-asaabs-tuned-x1c-print-profiles-for-bamb\" rel=\"nofollow noopener\"\u003eABS\/ASA\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003e \u003c\/h4\u003e\u003ch4\u003eHow to use:\u003c\/h4\u003e\u003cp\u003eThese 3MF files are designed for use in Orcaslicer\/Bambuslicer, but will work best in Orcaslicer, because it supports using a fixed pressure-advance value in the slicer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLoad the 3MF file for the filament of your choosing. Files are named as \u0026lt;\u003cstrong\u003eBrand\u0026gt;__.3mf\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e(optional, recommended): Save the filament and\/or print presets for your own use to your user presets for future use.\u003c\/li\u003e\n\u003cli\u003eRemove the calibration cube dummy object and put your desired object in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint! But, turn off flow calibration option in your prints!\u003c\/strong\u003e The more reliable PA value stored in the filament profile will be used instead, and you can skip the wasted startup time, too!\u003cul\u003e\u003cli\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000015504\/design\/75d78ac6-552e-4c12-9d46-d7d6fa16c1cc.png\"\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eIf you want to use these in Bambu slicer, you won't get the PA values applied automatically sadly, and you'll have to do that with a \u003ca target=\"_blank\" href=\"https:\/\/forum.bambulab.com\/t\/flow-calibration\/892\/15\" rel=\"nofollow noopener\"\u003emanual GCODE in the filament's start GCODE\u003c\/a\u003e. This is really annoying to do for each filament, but it does work. However I suggest you try Orcaslicer for this reason.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003ch4\u003eImportant notes:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThese profiles are tuned on an X1C, with a hardened steel 0.4 nozzle installed, for use with a range of layer heights. \u003cstrong\u003eIf you have a different nozzle size or nozzle kind (steel\/brass), these will be only starting points\u003c\/strong\u003e \u003cstrong\u003eand you should re-tune\u003c\/strong\u003e most of the variables except maybe temperature.\u003c\/li\u003e\n\u003cli\u003eEach 3MF also contains some of my own optimized settings for 0.16 mm prints, which I typically use, but these tuned filament profiles are designed\/tuned to work across a variety of different print profiles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBackground:\u003c\/h4\u003e\u003cp\u003eI use the \u003ca target=\"_blank\" href=\"https:\/\/github.com\/SoftFever\/OrcaSlicer\" rel=\"nofollow noopener\"\u003eOrca Slicer \u003c\/a\u003evariant of Bambu's slicer because it offers finer-grained control over the slicing process and makes tuning and using tuned filament profiles much easier than Bambu's official slicer, which lacks good calibration routines for some of the most important variables in good printing: \u003cstrong\u003eflow rate\u003c\/strong\u003e, \u003cstrong\u003epressure advance\u003c\/strong\u003e, and \u003cstrong\u003etemperature \u003c\/strong\u003eand \u003cstrong\u003evolumetric flow limits.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is particularly true for Bambu's Pressure Advance (\u003ca target=\"_blank\" href=\"https:\/\/github.com\/bambulab\/BambuStudio\/issues\/348\" rel=\"nofollow noopener\"\u003ethey incorrectly call this “flow”\u003c\/a\u003e) calibration, which forces you to run it every time and is unreliable, particularly on the popular textured PEI surface.\u003c\/p\u003e\u003cp\u003eEach of these profiles has been tuned for:\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow rate \u003c\/strong\u003e(aka extrusion multiplier)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure advance \u003c\/strong\u003e(aka linear advance)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature \u003c\/strong\u003e(with temp towers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolumetric flow limits \u003c\/strong\u003e(my settings are a little conservative based on printing the max volumetric flow rate calibration inside Orcaslicer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverrides\u003c\/strong\u003e (I typically try to avoid using these unless I have to)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003ci\u003eDisclaimer: These are free to use, and I do not own the OrcaSlicer calibration cube model, i'm just using it here as a convenient way to distribute the profiles.\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003e\u003ci\u003eDisclaimer: The CA filaments link in the description here is a 25% off-first-order coupon link, but I'm not affiliated with CA filaments in any way, and they did not ask me to make this post.\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003eDesign by Adam L on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67399895482672,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_f8187be7-f88b-4582-bb95-1d86ccded83b.png?v=1784915527","url":"https:\/\/mymadmanlab.com\/products\/petg-tuned-x1c-print-profiles-for-bambu-orcaslicer","provider":"Mymadmanlab.com","version":"1.0","type":"link"}