{"product_id":"plastic-waste-bin","title":"Plastic Waste Bin","description":"\u003cblockquote\u003e\n\u003cp\u003e\u003cmark\u003e\u003cstrong\u003e2023-10-02 Update!\u003c\/strong\u003e\u003c\/mark\u003e\u003c\/p\u003e\n\u003cp\u003eI've updated the Lid frame \u0026amp; Complete Lid files thanks to the feedback. I know it's funny to do an update on a literal bin, but here we go I guess!\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eThe update adds a small retainer radius for the trap door so it doesn't fall out by itself anymore. You can still “force remove” it, but if you clip it back it actually stays put now.\u003cbr\u003e \u003c\/li\u003e\n\u003cli\u003eI've also increased the height of the inner wall so it sits more securely in the bin. Adds a tiny bit of material but it feels more roboust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cmark\u003e\u003cstrong\u003eImportant to note:\u003c\/strong\u003e\u003c\/mark\u003e\u003cbr\u003eYou don't need to print out the whole complete Lid assembly again! If you already have the parts you just need the frame! I've added a profile just for that and replaced the lid assembly with R2. Old files are removed as of now.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/60098\/2023-10-02_7649a13ad0209.png\"\u003e\u003c\/figure\u003e\n\u003c\/blockquote\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBin dimensions: 100x100x115 mm\u003c\/strong\u003e so it fits quite a bit of mess before needing to be emptied.\u003c\/p\u003e\u003cp\u003e---\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eBin\u003c\/strong\u003e can be used by itself and \u003cstrong\u003eshould be printed in Vase mode.\u003c\/strong\u003e It's a solid model. \u003cbr\u003eI highly suggest using the following settings (if not the project files are used):\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLine\/wall width: 0.8 mm\u003c\/li\u003e\n\u003cli\u003eFirst layer width: 0.8 mm\u003c\/li\u003e\n\u003cli\u003eBottom layers: at least 3\u003c\/li\u003e\n\u003cli\u003eLayer height: 0.2 mm (text looks better with 0.16, otherwise doesn't matter much)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eI uploaded the .3mf files with the settings. \u003cbr\u003eYou can change the material etc… but it contains the 0.8 settings for thicker walls. You can print it fine with the default 0.4 Nozzle. Makes the Bin a lot more rigid but still print fast. I used Fillamentum's Crystal Clear PLA to print it with basically the generic PLA settings.\u003c\/p\u003e\u003cp\u003e\u003ci\u003ePrint time: ~1h26m with 0.2 layers\u003c\/i\u003e\u003cbr\u003e\u003ci\u003eMaterial: 46 g\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003e---\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eComplete Lid\u003c\/strong\u003e consists of 2 parts. You can print them together at once and move the trapdoor a little to release them after printing. Or if you want to mix up the colors without AMS, I added them separately as well. Uploaded the .3mf file for this one too. Generally this part is not that picky for settings, but here's a few suggestions:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrint with the text facing the build plate\u003c\/li\u003e\n\u003cli\u003eBottom layers: 3-4\u003c\/li\u003e\n\u003cli\u003eTop layers 2-3\u003c\/li\u003e\n\u003cli\u003eTextured PEI plate for nice look\u003c\/li\u003e\n\u003cli\u003e10% Grid infill at least so the lid has some weight to close itself, you can use combine infill option to save a little time\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ci\u003ePrint time: ~37m with 0.2 layers\u003c\/i\u003e\u003cbr\u003e\u003ci\u003eMaterial: 26 g\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003eYou can remove the trapdoor if it annoys you flapping around. The frame alone gives a nice touch too if you print in a different color than the base.\u003c\/p\u003e\u003cp\u003eDesign by Vergil on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67382529884464,"sku":null,"price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_de04ee6e-5f40-4e9f-8604-0bc9f74dc28d.png?v=1784478682","url":"https:\/\/mymadmanlab.com\/products\/plastic-waste-bin","provider":"Mymadmanlab.com","version":"1.0","type":"link"}