{"product_id":"pocket-screwdriver-kit-v2","title":"Pocket Screwdriver Kit v2","description":"\u003cp\u003eIntroducing v2 of the popular \u003ca target=\"_blank\" href=\"https:\/\/www.printables.com\/model\/271645-pocket-screwdriver-kit\" rel=\"nofollow noopener\"\u003ePocket Screwdriver Kit\u003c\/a\u003e! Holds straight ¼\" \/ 6mm bits, up to ~ 1\" \/ 25mm in length. This version was re-built from scratch to correct some irritating deficiencies in the earlier model, particularly:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNO GLUE REQUIRED!\u003c\/strong\u003e The handle and bit holder now feature a permanent snap fit, so you don't need to fuss with gluing parts together.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMBEDDED MAGNET!\u003c\/strong\u003e There is now proper space to embed a 6x2mm disc magnet in the end. (\u003ca target=\"_blank\" href=\"https:\/\/www.amazon.com\/Magnets-Refrigerator-Neodymium-Whiteboard-Kitchen\/dp\/B0CCXHY9P8\/\" rel=\"nofollow noopener\"\u003eAmazon.com example\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003eOptimized dimensions and tolerances for consistent printing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cfigure class=\"image image_resized\" style=\"width: 62%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000253704\/design\/2024-03-11_5864d0e7859aa.png\"\u003e\u003c\/figure\u003e\u003cp\u003eAlso uploaded is the parametric Fusion360 .f3d file if you'd like to make customizations.\u003c\/p\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eIf you appreciate the model, I'd be grateful for a boost of support!\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003ch2\u003ePrint Instructions\u003c\/h2\u003e\u003cp\u003ePrint with a \u003cstrong\u003e0.4mm nozzle\u003c\/strong\u003e and a \u003cstrong\u003elayer height\u003c\/strong\u003e of \u003cstrong\u003e0.2mm\u003c\/strong\u003e. Some areas and tolerances are likely to be too tight with a wider nozzle or untested layer heights. It should still work, but the fit may be less than ideal.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe model consists of three parts:\u003c\/p\u003e\u003cfigure class=\"image image_resized\" style=\"width: 61.24%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000253704\/design\/2024-03-11_3dbf89d2111b9.png\"\u003e\u003c\/figure\u003e\u003cul\u003e\n\u003cli\u003eThe bit holder should be printed flat. The case and handle should be printed vertically.\u003c\/li\u003e\n\u003cli\u003eA brim is recommended for the case.\u003c\/li\u003e\n\u003cli\u003e3 perimeters and 15% infill is sufficient for most use.\u003c\/li\u003e\n\u003cli\u003ePause the case at layer 314 (for default case) to insert 6x2mm magnet.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003e\u003ci\u003e\u003cstrong\u003eAn important note on tolerance\u003c\/strong\u003e\u003c\/i\u003e\u003c\/h4\u003e\u003cp\u003e\u003ci\u003eTolerance has been designed to be a best possible fit for as many situations as possible. Different printers, different filaments, and even different bits will factor into your experience. I have “standard” ¼-inch (6.35mm) bits that vary as much as 0.05mm in width, which makes a noticeable difference in this model.\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003ci\u003eAll this means there is a pretty good chance your bits will fit a little loose or a little tight. Let me know if you need an adjustment!\u003c\/i\u003e  \u003c\/p\u003e\u003ch2\u003eAssembly\u003c\/h2\u003e\u003cp\u003eThe bit holder snaps into the handle. It is meant to be a firm and permanent fit, so it takes a bit of force to get it together.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eI have found it easiest to use the case to press the bit holder and handle parts together:\u003c\/p\u003e\u003cfigure class=\"table\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1. Insert the bit holder into the case, with the snap hooks pointed out.\u003c\/td\u003e\n\u003ctd\u003e\u003cfigure class=\"image image_resized\" style=\"width: 34.11%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000253704\/design\/2024-03-11_8cd3beb61a3b.png\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2. Push the snap hooks firmly into the handle and push straight in until it snaps. \u003ci\u003ePush straight! The snap hooks can break if you do not apply pressure evenly.\u003c\/i\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cfigure class=\"image image_resized\" style=\"width: 37.49%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000253704\/design\/2024-03-11_70ab7e02f0d99.png\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3. Pull the bit holder out of the case and set the case aside. Using a table or other firm surface, gently press the handle straight down on the bit holder to close the small remaining gap.\u003c\/td\u003e\n\u003ctd\u003e\u003cfigure class=\"image image_resized\" style=\"width: 10.63%\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000253704\/design\/2024-03-11_a775b6f043153.png\"\u003e\u003c\/figure\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/figure\u003e\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000000253704\/design\/2024-03-11_328e832c11afd.gif\"\u003e\u003cfigcaption\u003eDemonstration of assembly\u003c\/figcaption\u003e\u003c\/figure\u003e\u003ch2\u003e\u003ci\u003e“Critical feedback is always appreciated”\u003c\/i\u003e\u003c\/h2\u003e\u003cp\u003eComments and pictures of previous makes are what motivated me to create version 2 of this model. I am particularly thankful for those who point out what didn't work, or what could be better. Please post your makes and let me know how the model could be improved. Your feedback is what inspires creators to build and share, so keep it coming!\u003c\/p\u003e\u003cp\u003eDesign by schutz on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67367128793392,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_38cb2124-9d86-45b7-b2cb-52730495530d.png?v=1784009797","url":"https:\/\/mymadmanlab.com\/products\/pocket-screwdriver-kit-v2","provider":"Mymadmanlab.com","version":"1.0","type":"link"}