{"product_id":"print-in-place-bag-clip-parametric","title":"Print-in-Place Bag Clip (Parametric)","description":"\u003cdiv\u003e\n\u003ch1\u003eSummary\u003c\/h1\u003e\n\u003cdiv\u003e\n\u003cblockquote\u003e\u003cdiv\u003eA 30–250 mm set of bag clips with an improved hinge and an editable source file.\u003c\/div\u003e\u003c\/blockquote\u003e\n\u003cdiv class=\"ThingPage__blockTitle--3ZdLu\"\u003eWhat's new\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eRedesigned hinges that feel solid and last a lot longer\u003c\/li\u003e\n\u003cli\u003eReduced gap between the arms when closed\u003c\/li\u003e\n\u003cli\u003eAn easy to edit source file for all your customization needs\u003c\/li\u003e\n\u003cli\u003eThe clicky latch is now standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"ThingPage__blockTitle--3ZdLu\"\u003eHow to print\u003c\/div\u003e\n\u003cp\u003eI recommend you use PETG for its great bed adhesion and mechanical resilience. You could use PLA too, but beware that it will deform over time due to the pressure of whatever you're clamping constantly pushing the arms apart and eventually bending them slightly. If you do choose PLA, you can restore the clip to its original shape by compressing it with some kind of clamp and putting it in warm water for 10 minutes.\u003c\/p\u003e\n\u003cdiv class=\"ThingPage__blockTitle--3ZdLu\"\u003eCommon issues\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003eThe latch is too tight\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eTry decreacing the extrusion multiplier in the slicer by 2–5% and printing again. \u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eThe latch is too loose\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eTry increasing the extrusion multiplier in the slicer by 2–5% and printing again.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eOne or both hinges are fused at the bottom\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTry moving them carefully until they break free. The clip might still be savable.\u003c\/li\u003e\n\u003cli\u003eMake sure you bed is clean and parts of the hinge don't come off during printing.\u003c\/li\u003e\n\u003cli\u003eMake sure you are not printing to close to the bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eOne or both hinges are fused all the way through\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMake sure you bed is clean and parts of the hinge don't come off during printing.\u003c\/li\u003e\n\u003cli\u003eTry decreacing the extrusion multiplier in the slicer by 2–5% and printing again.\u003c\/li\u003e\n\u003cli\u003eTry lowering the temperature by 5°C and printing again\u003c\/li\u003e\n\u003cli\u003eTry increasing the cooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eThe gap between the arms is too wide\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePut the clip in hot water for 5 minutes (60-80 degrees depending on material). You can also use the heated bed for this step.\u003c\/li\u003e\n\u003cli\u003eBend the arm that doesn't have the latch outwards a bit.\u003c\/li\u003e\n\u003cli\u003eAfter it cools off you'll get much better clamping forces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"ThingPage__blockTitle--3ZdLu\"\u003eHow to edit\u003c\/div\u003e\n\u003cp\u003eIf you want to make a custom-legth clip, add imbedded magnets, or change the design enitrely—download the .f3d file.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eChanging the length:\u003c\/b\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFind the Change Parameters option in the Solid tab (it might be in the dropdown menu titled Modify).\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/633436\/2024-03-04_5jvd4tlg1lv2.png\" alt=\"image\"\u003e\n\u003c\/li\u003e\n\u003cli\u003eFind the cliplength parameter\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/633436\/2024-03-04_2lbxnxvicu36.png\" alt=\"image\"\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnter the desired value in mm and press enter\u003c\/li\u003e\n\u003cli\u003eFind the Reinforcement group in the timeline\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/633436\/2024-03-04_sjg1o9bmh46f.png\" alt=\"image\"\u003e\n\u003c\/li\u003e\n\u003cli\u003eRight click and sellect Suppress\/Unsuppress Features\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/draft\/633436\/2024-03-04_d3e3a2dnhsia.png\" alt=\"image\"\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cp\u003eDesign by neoyarus on MakerWorld (license: BY-SA).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67408865394992,"sku":null,"price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_b4cc539f-766c-4211-ac03-3c9b51680606.png?v=1785231900","url":"https:\/\/mymadmanlab.com\/products\/print-in-place-bag-clip-parametric","provider":"Mymadmanlab.com","version":"1.0","type":"link"}