{"product_id":"prusa-mk4-and-core-one-like-build-plate-holder","title":"PRUSA MK4 and Core One Like Build Plate Holder","description":"\u003ccommercialme\u003e\u003ccommercialtitle\u003eMembership\u003c\/commercialtitle\u003e\u003ccommercialcontent\u003eBecoming a member you will help to support me in my working on my models and also you will have rights to use prints commercially. Plus You will be first in line if any modifications of model will be needed in your case\u003c\/commercialcontent\u003e\u003c\/commercialme\u003e\u003cboostme\u003e\u003cboosttitle\u003eBoost Me\u003c\/boosttitle\u003e\u003cboostcontent\u003eIf You like what I'm doing and want to support me in my work here. Every little helps.\u003c\/boostcontent\u003e\u003c\/boostme\u003e\u003ch2 style=\"text-align: center\"\u003ePRUSA MK4 \/ Core One and similar Printer Build Plate Holder\u003c\/h2\u003e\u003cp\u003eHere is Build Plate holder made made by request for PRUSA MK4 Core One and other with same Build Plate size printers. Plate sizes this Holder is made for are \u003cstrong\u003e254 x 241mm\u003c\/strong\u003e. Holder can hold plates up tu \u003cstrong\u003e255mm\u003c\/strong\u003e in width and \u003cstrong\u003e241mm\u003c\/strong\u003e and up to \u003cstrong\u003e255mm\u003c\/strong\u003e long (or vice versa of course). \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eIn the presented \u003cstrong\u003eProfile\u003c\/strong\u003e and \u003cstrong\u003eRAW file section\u003c\/strong\u003e you will find a two \u003cstrong\u003eBase Parts\u003c\/strong\u003e and four \u003cstrong\u003eFrame\u003c\/strong\u003e half parts. You will need only two frame parts per \u003cstrong\u003eHolder\u003c\/strong\u003e. Frames are done in two versions (thats why there are 4 of them instead of two). So You can choose Clean version or version with \u003cstrong\u003ePRUSA Logo\u003c\/strong\u003e and \u003cstrong\u003eMK\u003c\/strong\u003e mark on the sides. So check Plate descriptions or file names (if using RAW files) before print them out.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eAssembling is very easy here:\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eAlmost no hardware needed. All You will need here are \u003cstrong\u003e1\u003c\/strong\u003e or \u003cstrong\u003e3 M3x16mm \u003c\/strong\u003eSelf Tapping screws. Ideally with countersunk heads but other ones like Socket Head from Bambu Maker's supply will be just fine as well. \u003c\/p\u003e\u003cul style=\"list-style-type: disc\"\u003e\n\u003cli\u003ePut Bottom and Front Base parts together by sliding from top using slide rails. You can use a glue to permamently fix them together. Just make sure they are flush on tyhe bottom as if you will leave one a bit higher than other one it can cause a problem sliding Frame into a Base!!!  \u003c\/li\u003e\n\u003cli\u003eNext move is to put Top and Bottom parts of the Frame together. Push them together using Top Parts Pegs and corresponding Bottom Parts Peg Holes and push Top Part forward. Fix position with M3x14mm or 16mm self tapping Screw in provided screw hole on the back of  Frame. And again, if you want, you can use a glue for firm connection.\u003c\/li\u003e\n\u003cli\u003eFully slide Frame into the Base and that's it. You can fix frame in it's position with \u003cstrong\u003eone or two M3x14-16mm\u003c\/strong\u003e self tapping screws. But this is not a requirement. Just an option for ya.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eYou can Buy me a coffee if You would like to support me even more :)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.buymeacoffee.com\/warlogh\"\u003e\u003cimg src=\"https:\/\/makerworld.bblmw.com\/makerworld\/model\/DSM00000002443828\/design\/2025-02-01_fe395cbcf28d.png\"\u003e\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/www.buymeacoffee.com\/warlogh\"\u003ehttps:\/\/www.buymeacoffee.com\/warlogh\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e(\u003c\/strong\u003eAnd very Big Thank You For interest in my work\u003cstrong\u003e)\u003c\/strong\u003e  \u003c\/p\u003e\u003cp\u003eDesign by warlogh on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67391466766640,"sku":null,"price":65.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_7ff00c2c-b909-427a-b39c-b44821864511.png?v=1784752076","url":"https:\/\/mymadmanlab.com\/products\/prusa-mk4-and-core-one-like-build-plate-holder","provider":"Mymadmanlab.com","version":"1.0","type":"link"}