{"product_id":"ptfe-funnel-adapter","title":"PTFE Funnel Adapter","description":"\u003cp\u003eI recently got a P1S Combo and - given the fact that Several filaments should not be printed with the AMS (such as TPU or filaments on cardboard spools) - first thing I added was the Smoothy splitter (check it out - really a great addition to this setup: \u003ca target=\"_blank\" href=\"https:\/\/makerworld.com\/en\/models\/18174?from=search#profileId-17021\" rel=\"nofollow noopener\"\u003ehttps:\/\/makerworld.com\/en\/models\/18174?from=search#profileId-17021\u003c\/a\u003e). However, I didn't like to fumble the filament into the PTFE tube, so I added a funnel to the PTFE tube (\u003ca target=\"_blank\" href=\"https:\/\/makerworld.com\/en\/models\/66235#profileId-69487\" rel=\"nofollow noopener\"\u003ehttps:\/\/makerworld.com\/en\/models\/66235#profileId-69487\u003c\/a\u003e). This worked quite fine, but the PTFE tube used to get behind the printer, so I had to “fish” it back to the front in order to put my filament into it.\u003c\/p\u003e\u003cp\u003eSo I came up with this design. Since it is attached to the side of the P1s (which is not magnetic), I use double sided sticky tape to attach it.\u003c\/p\u003e\u003cp\u003eAdditionally you will need\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e1 x PC4-M6 (I used the one with a blue ring).\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eBest to print it with support and funnel side down - otherwise the support will mess up the threads.\u003c\/p\u003e\u003cp\u003eDesign by user_211525597 on MakerWorld (license: BY).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67409935958320,"sku":"MW-468633","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_e6e5e364-2890-4d12-a7c0-e4aaf12cf5f3.png?v=1785282265","url":"https:\/\/mymadmanlab.com\/products\/ptfe-funnel-adapter","provider":"Mymadmanlab.com","version":"1.0","type":"link"}