{"product_id":"qubit-the-desk-robot","title":"Qubit, The Desk Robot","description":"\u003ch2\u003eQubit — Dual-Arm Desk Robot\u003c\/h2\u003e\u003cp\u003eQubit is a fully open-source desktop robot with two SO-100 arms, expressive LED eyes, and a Raspberry Pi brain. Print the parts, wire it up, and you've got a robot that can demo, dance, pick things up, and react to the world around it. All the software is Python, all the files are free, and the whole thing is designed to be remixed.\u003c\/p\u003e\u003ch2\u003e🖨️ What You're Printing\u003c\/h2\u003e\u003cp\u003eThe chassis is designed for a Bambu Lab A1 in PLA+ and PETG. Ten parts total — head shell, neck bracket, body frame, shoulder mounts for both arms, LED tube holders, base plate, and a cable cover. Print time is roughly 8–12 hours per arm spread across all parts.\u003c\/p\u003e\u003cp\u003e(Optional) Use \u003cstrong\u003ePETG for anything structural\u003c\/strong\u003e (body frame, shoulder brackets, neck) — they take real torque from the servos. PLA+ is fine for the cosmetic shell pieces.\u003c\/p\u003e\u003cp\u003eRecommended settings: 0.2mm layer height, 40% gyroid infill, supports on for the arm joint brackets.\u003c\/p\u003e\u003ch2\u003e🦾 The Build\u003c\/h2\u003e\u003cp\u003eBeyond the printed parts, each arm runs on 6× Feetech STS3215 serial bus servos daisy-chained through a Waveshare motor control board, powered by a dedicated 7.5V supply. Two arms means 12 servos total.\u003c\/p\u003e\u003cp\u003eThe head houses a 16×16 iDotMatrix LED display over Bluetooth — this is what gives Qubit its expressive eyes. Two WS2812B LED tubes mount on either side for ambient RGB lighting.\u003c\/p\u003e\u003cp\u003eEverything connects back to a \u003cstrong\u003eRaspberry Pi 5\u003c\/strong\u003e via USB. Total build cost lands around \u003cstrong\u003e$700–800 USD\u003c\/strong\u003e depending on sourcing, with the printer being the biggest chunk.\u003c\/p\u003e\u003ch2\u003e🧠 The Software\u003c\/h2\u003e\u003cp\u003eAll control software is Python and lives in the open-source repo. Out of the box you get:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeleoperation\u003c\/strong\u003e — mirror a leader arm to control the follower in real time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecord \u0026amp; replay\u003c\/strong\u003e — physically move an arm to record a sequence, then play it back on loop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14 LED emotes\u003c\/strong\u003e — animated expressions (happy, blink, glitch, heart, sleep, and more)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdle animations\u003c\/strong\u003e — ambient behaviors that run automatically when Qubit isn't doing anything\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace tracking\u003c\/strong\u003e — Pi Camera v3 + OpenCV to track and follow faces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb dashboard\u003c\/strong\u003e — a local Flask UI at qubit.local:5000 for controlling everything from a browser\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSetup is a git clone, a pip install, and editing one YAML config file to match your hardware.\u003c\/p\u003e\u003ch2\u003e🛠️ Skill Level\u003c\/h2\u003e\u003cp\u003eThis is an intermediate build. You'll need to be comfortable with 3D printing tolerances, basic wiring, and running Python on a Raspberry Pi. The software is well-documented and the config is straightforward — no custom firmware, no soldering required.\u003c\/p\u003e\u003cp\u003eIf you've built a printer or done any Raspberry Pi projects before, you'll be right at home.\u003c\/p\u003e\u003ch2\u003e🔗 Full Docs \u0026amp; Source\u003c\/h2\u003e\u003cp\u003eEverything — wiring diagrams, full BOM with links, Python scripts, emote JSON files, and contribution guides — is in the GitHub repo.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003egithub.com\/0xaiwhisperer\/qubit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBuilt by \u003ca target=\"_blank\" rel=\"noopener noreferrer ugc\" href=\"https:\/\/twitter.com\/0xaiwhisperer\"\u003e@0xaiwhisperer\u003c\/a\u003e · \u003ci\u003eThe A.I. Whisperer\u003c\/i\u003e\u003c\/p\u003e\u003cp\u003eDesign by The A.I. Whisperer on MakerWorld (license: CC0).\u003c\/p\u003e","brand":"Mymadmanlab","offers":[{"title":"Default Title","offer_id":67370050650416,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0987\/0809\/5280\/files\/0_79cc9bef-fc1e-49c8-a930-0254c62f443a.png?v=1784093363","url":"https:\/\/mymadmanlab.com\/products\/qubit-the-desk-robot","provider":"Mymadmanlab.com","version":"1.0","type":"link"}